Matrox Electronic Systems Ltd.
Dorval, QC H9P2T4 CAN
Share:
New Flowchart-based Vision Software Interfaces with Matrox AltiZ 3D Profile Sensors
Matrox Design Assistant X has the capabilities to analyse 3D profiles obtained directly from a sensor or extracted from a point cloud or depth map. Additions and improvements include interfaces to additional 3D sensors, expanded image classification using deep learning, image capture from CoaXPress® cameras and expanded support for working with PLCs. IDE provides an intuitive way to develop...
Read More »
New Rapixo CL Pro Frame Grabbers Provide Reliable Image Acquisition
Deliver onboard image processing offload to field-programmable gate array (FPGA) devices, high frame-rate image capture and support for extended cable lengths. Offer support development of custom FPGA configurations to relieve host system of intensive image-processing functions. Users can interface with up to four base or two full/80-bit mode camera link cameras at up to 85 MHz on a single board.
Read More »
New Matrox AltiZ 3D Profile Sensors are IP67 Rated
Deliver 3D reproduction fidelity and interoperability with machine vision software supporting the GigE Vision interface. Feature dual-camera single-laser design that lessens scanning gaps and data-fusion capability. Equipped with single optical sensor and can withstand in harsh industrial environments.
Read More »
Latest Matrox Imaging Library Software Optimized for Neon SIMD Architecture Extension
Supports Arm® Cortex®-A family of processors with enhanced performance using Neon™ SIMD architecture extension. Enables wide selection of processing, analysis, annotation, display and archiving functionality. Ideal for automotive component manufacturing, pharmaceutical manufacturing and processing, electronics manufacturing and assembly, industrial robotics, and packaging applications.
Read More »
New Matrox Rapixo CXP Frame Grabbers Support Power-Over-CoaXPress
Available in single, dual, and quad board models. Applications can be programmed using the latest uMatrox Imaging Library (MIL) software development kit (SDK). Offers increased data rate up to 12.5 Gbps.
Read More »
New Matrox Concord PoE Adaptor Card Features Trigger-over-Ethernet Capabilities
The Matrox Concord PoE Adaptor Card comes with eight auxiliary I/Os that synchronize multiple GigE Vision devices. The product is offered with either two or four Gigabit Ethernet ports. The ToE capability allows user to send a software trigger or an action-command to multiple cameras based on external input event. The unit is equipped with multiple cascadable hardware timers for counting or...
Read More »The New Matrox Imaging Software Features Deep Learning, 3D Interfacing
The new imaging system software from Matrox features deep learning and 3D sensor interfacing. Capabilities include image classifications and photometric stereo to identify surface irregularities. The software allow for a graphical web-based interface capable of modifying the vision application.
Read More »
Matrox 4Sight EV6 Vision Controller Features Embedded Mobile-Class Processor
The Matrox 4Sight EV6 Vision Controller is capable of handling multi-camera inspections with ease and efficiency. The device is offered with four Gigabit Ethernet and four SuperSpeed USB ports that enable multiple connections. The controller features RS-232/RS-485 ports, two GigE ports and a hardware-assisted mechanism for PROFINET® communication. It comes in rugged casing that makes it suitable...
Read More »
New Matrox FPGA Development Kit Harnesses the Flexibility of FPGAs for Image Processing
The Matrox FPGA Development Kit is designed for CXP family of frame grabbers and supports development of custom FPGA configurations with intensive image-processing functions. The product is offered with library of ready-made FPGA design components and works in tandem with Xilinx IP library that deliver more than 50 image-processing functions. The FDK is compatible with version 2.0 of the...
Read More »
Rapixo CXP Series Frame Grabbers Now Support Data Rates up to 12.5 Gbps
Rapixo CXP Series Frame Grabbers are suitable for machine vision applications for high speeds of data rates with the use of PCIe® x8 host computer interface. Units allow up to four connections to interface with four CXP 2.0-compliant cameras or two cameras through connection aggregation. Rapixo CXP features field-programmable gate array device (FPGA) for control, formatting, and streaming logic...
Read More »
New Flowchart-based Vision Software Interfaces with Matrox AltiZ 3D Profile Sensors
Matrox Design Assistant X has the capabilities to analyse 3D profiles obtained directly from a sensor or extracted from a point cloud or depth map. Additions and improvements include interfaces to additional 3D sensors, expanded image classification using deep learning, image capture from CoaXPress® cameras and expanded support for working with PLCs. IDE provides an intuitive way to develop...
Read More »
New Rapixo CL Pro Frame Grabbers Provide Reliable Image Acquisition
Deliver onboard image processing offload to field-programmable gate array (FPGA) devices, high frame-rate image capture and support for extended cable lengths. Offer support development of custom FPGA configurations to relieve host system of intensive image-processing functions. Users can interface with up to four base or two full/80-bit mode camera link cameras at up to 85 MHz on a single board.
Read More »Matrox Imaging Honored by Vision Systems Design 2020 Innovators Awards Program
Montreal, Quebec—16 June 2020—Matrox® Imaging, established and trusted supplier to top machine vision OEMs and integrators for more than 40 years, announced today that its recently introduced Matrox AltiZ 3D profile sensors were recognized among the best in machine vision today by the judges of the Vision Systems Design 2020 Innovators Awards program. The judging panel consisted of...
Read More »
New Matrox AltiZ 3D Profile Sensors are IP67 Rated
Deliver 3D reproduction fidelity and interoperability with machine vision software supporting the GigE Vision interface. Feature dual-camera single-laser design that lessens scanning gaps and data-fusion capability. Equipped with single optical sensor and can withstand in harsh industrial environments.
Read More »
Latest Matrox Imaging Library Software Optimized for Neon SIMD Architecture Extension
Supports Arm® Cortex®-A family of processors with enhanced performance using Neon™ SIMD architecture extension. Enables wide selection of processing, analysis, annotation, display and archiving functionality. Ideal for automotive component manufacturing, pharmaceutical manufacturing and processing, electronics manufacturing and assembly, industrial robotics, and packaging applications.
Read More »Lorne Trottier Acquires Full Ownership of Matrox, to Lead New Era of Tech Innovation
MONTREAL, QUEBEC—September 9, 2019—Matrox® is excited to announce that Mr. Lorne Trottier, co-founder of Matrox, has acquired 100% ownership of the Matrox group of companies, including its three divisions—Matrox Imaging, Matrox Graphics, and Matrox Video. “This next phase represents a renewed commitment to our valued customers, suppliers, and business partners, as well as to our 700...
Read More »
New Matrox Rapixo CXP Frame Grabbers Support Power-Over-CoaXPress
Available in single, dual, and quad board models. Applications can be programmed using the latest uMatrox Imaging Library (MIL) software development kit (SDK). Offers increased data rate up to 12.5 Gbps.
Read More »Matrox Imaging Launches New Training Website with Course Offerings
MONTREAL, Quebec—20 March 2019—Today, Matrox® Imaging proudly announces the launch of its new Matrox Vision Academy website, designed to enrich the user experience. With the aim of easier navigation, the new Matrox Vision Academy website offers the option of keyword-based searching, as well as a simplified menu-driven interface that includes convenient access to new video content....
Read More »Matrox Imaging Announces New Distributor in Mainland China
Expanded coverage in mainland China as of January 2019 Montreal, Quebec, 24 January 2019 — Matrox® Imaging welcomes a new Chinese addition to their global network of representatives. Attuned to the needs of their customers, Matrox Imaging stands by their five core advantages, ensuring customers benefit from a global network of distributors who offer complementary products and support, and...
Read More »
New Matrox Concord PoE Adaptor Card Features Trigger-over-Ethernet Capabilities
The Matrox Concord PoE Adaptor Card comes with eight auxiliary I/Os that synchronize multiple GigE Vision devices. The product is offered with either two or four Gigabit Ethernet ports. The ToE capability allows user to send a software trigger or an action-command to multiple cameras based on external input event. The unit is equipped with multiple cascadable hardware timers for counting or...
Read More »
