Pulse Electronics

Power Splitters work with low PIM in-building DAS antennas.
Electronic Components & Devices

Power Splitters work with low PIM in-building DAS antennas.

Respectively, DASSPLIT2WNF/3WNF/4WNF areÂ- 2-, 3-, and 4-way power splitters with N female connectors. Also available, DASSPLIT2WDIN 2-way power splitter has female 7 16 DIN connectors. Each of these products work with PIMinator low passive intermodulation (PIM) indoor distributed antenna system (iDAS) series to ensure PIM spec of -155 dBc at 2 x 20 W in buildings where multiple...

Read More »
Halogen-Free 10GBASE-T RJ45 ICM has ultra low profile design.
Communication Systems & Equipment

Halogen-Free 10GBASE-T RJ45 ICM has ultra low profile design.

Intended for 10 gigabit server, router, and storage applications, JT3-1101HL offset 10GBASE-T (10 Gbit/s Ethernet over unshielded twisted-pair) RJ45 integrated connector module (ICM) has 9.04 mm profile once installed on PCB. This affords flexibility to 10GBASE-T designs with limited-height I/O panels that need to be configured so RJ45 is in line with PCB. Product, tuned to have flat insertion...

Read More »
Class H Line Driver Transformers support VDSL2 vectoring.
Electrical Equipment & Systems

Class H Line Driver Transformers support VDSL2 vectoring.

Compliant with Lantiq's Vinax V3 chipset, 30 MHz Models BX4289LNL and BX4289LNLT are used with Class H line driver to deliver high bandwidth over existing copper transmission lines.Â- Transformers drive data rates up to 150 Mbps/downstream and 100 Mbps/upstream on single line, supporting such services as HD IPTV, high-speed Internet access, multi-player gaming networks, and VoIP. Packaged in...

Read More »
In-Building Omni Antennas feature -155 dBc PIM rating.
Communication Systems & Equipment

In-Building Omni Antennas feature -155 dBc PIM rating.

With passive inter-modulation specification of -155 dBc at 2 x 20 W, PIMinatorsÂ- meet demanding requirements of cellular operators and integrators of low PIM components for 2G, 3G, and LTE/4G bands worldwide. Ceiling mount Distributed Antenna Systems allow users to receive cellular coverage inside buildings. Measuring 8.27 in. in diameter, DASLTE500NF has 500 mm plenum rated coaxial pigtail...

Read More »
High-Speed I/O Connectors operate from 5-10 Gbps.
Construction Equipment and Supplies

High-Speed I/O Connectors operate from 5-10 Gbps.

Operating as storage interface, SATA III Connector supports server, desktop/mobile PC, hard drive, and HD DVR applications. PCIe3.0 ConnectorÂ- can support up to 8 Gbps and is used in expansion cards that interconnect with server, switch, router, and desktop applications. Through single, compact port, Thunderbolt Connector supports high-resolution displays and data devices. USB 3.0 Connector...

Read More »
Electrical Equipment & Systems

VDSL2 Transformers work with Lantiq Vinax V3 chipsets.

Used in conjunction with Lantiq Vinax V3 chipsets, BX4290LNL and BX4290LNLT support such services as HD IPTV, high-speed Internet access, multi-player gaming networks, and VoIP. Design optimizes longitudinal balance and THD within compact form factor, and use with Class AB line driver delivers high bandwidth over existing copper transmission lines. Vectoring technology eliminates noise and...

Read More »
VDSL Transformers support vectoring to eliminate noise.
Construction Equipment and Supplies

VDSL Transformers support vectoring to eliminate noise.

Compatible with Broadcom's BCM65x00 chipset family that integrates vectoring technology, 30 MHz Models BX4285LNL and BX4285LNLT can be used in both VDSL2 vectoring and non-vectoring configurations as Class H line drivers to deliver high bandwidth over existing copper transmission lines. When used withÂ- Broadcom chipset, transformers produce high-speed data rates needed for HD video, gaming,...

Read More »
NFC Antenna meets EMVCo 40mm specification.
Communication Systems & Equipment

NFC Antenna meets EMVCo 40mm specification.

Custom-made to fit mechanical specifications of mobile devices, 35 x 50 x 0.133 mm near field communications (NFC) ferrite sheet antenna operates at 13.56 MHz. RoHS-compliant antenna enables NFC connectivity to mobile devices for payment sharing, credential storage and exchange, accessing and controlling data, and wirelessly connecting to tags. Pad size is 2 x 2 mm, contacts are side-by-side, and...

Read More »
LDS Antennas integrate SMT components.
Communication Systems & Equipment

LDS Antennas integrate SMT components.

By incorporating SMT components, RoHS-compliant 3D Laser Direct Structuring (LDS) Antennas save space on mobile device's printed circuit board. Antennas can be matched and tested as one RF unit prior to phone assembly, and frequency variants, tuning, and late optimization changes can be done quickly, avoiding rework or rebuild of mobile device's main PCB.

Read More »
Communication Systems & Equipment

Multiband Navigation Antenna includes 5 GHz Wi-Fi.

Suited for 3G, 4G LTE, WLAN, and GPS applications, GPSDM700/5800SSS (black) and GPSDMW700/5800SSS (white) cover frequency bands 698–960 MHz, 1710–2170 MHz, 2300–2700 MHz, 2400–2485 MHz, 5150–5850 MHz, and 1575 MHz in one 4.16 in. dia x 3.5 in. tall, vehicular mount antenna. By including 5 GHz bands, complete range of IEEE802.11a/b/g/n bands are included in one device for WLAN...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers