Sundyne

New API 685 GSP Magnetic Drive Pumps are Equipped with In-Line Self-Cleaning Filters
Fluid & Gas Flow Equipment

New API 685 GSP Magnetic Drive Pumps are Equipped with In-Line Self-Cleaning Filters

Sundyne’s API 685 GSP Sealless Magnetic Drive Pumps are designed with UOP compliant construction materials. Units are embedded with VapourView™ technology, which provide early warnings for incorrect priming, venting, cavitation or entrained process gas. The self-cleaning filters circulate clean liquid around bearings by removing particulates. Units come with secondary containment system and...

Read More »
New Sunflo P-3400 Pump from Sundyne Features Modular Shaft Assembly
Fluid & Gas Flow Equipment

New Sunflo P-3400 Pump from Sundyne Features Modular Shaft Assembly

Sunflo Industrial Grade P-3400 Pump is designed for boiler feed, reverse osmosis, well injection and NOx suppression. Unit delivers flows of up to 500 gpm and heads up to 5,200 ft. The pump is equipped with heavy-duty carbon steel frame assembly, newly-designed impeller, heavy bearing system and an improved gear set for transmitting 60-percent increase in torque. Unit’s modular shaft assembly...

Read More »
Sunflo Industrial Grade Pumps feature suction inducer technology.
Fluid & Gas Flow Equipment

Sunflo Industrial Grade Pumps feature suction inducer technology.

Sunflo Industrial Grade P3000 Pumps come with single-stage, 316-stainless steel construction and thrust bearings in shaft assembly that helps in handling axial thrust without problematic balancing devices. The seal cooling process circulates the process fluid from the seal chamber through a seal flush cooler and back into the seal chamber that reduces fouling. Unit’s suction inducer technology...

Read More »
Sundyne's LMV 801 Line of Direct Drive Pumps adds a series of enhancements and optional upgrades.
Fluid & Gas Flow Equipment

Sundyne's LMV 801 Line of Direct Drive Pumps adds a series of enhancements and optional upgrades.

Sundyne's  LMV 801 line of driect drive centrifugal pumps now offer an optimized API 610 (OH3 or OH5) pump to address flows to 380 gpm (86 m³/hr), and heads to 720 ft (219 m), and a variety of optional upgrades, including the API 682 cartridge seal to prevent errors in installation and common seal failures, and the API 685 sealless magnetic drive to eliminate emissions and improve...

Read More »
ZeroLoss™ Containment Shells feature carbon fibre.
Materials

ZeroLoss™ Containment Shells feature carbon fibre.

ZeroLoss™ Containment Shells are made of poly-ether-ether-ketone composite material. Units are operated in a temperature range of -40°C to +150°C and help to reduce eddy current losses in the pump. Products are suitable for military and aerospace equipment applications and are designed for sealless magnetic drive pumps.

Read More »
Gearbox Output Seal increases MTBR for pumps, compressors.
Mechanical Components and Assemblies

Gearbox Output Seal increases MTBR for pumps, compressors.

Designed for use with Sundyne integrally geared pumps and compressors, SundSEAL minimizes leakage and increases Mean-time Between Repair (MTBR). This output shaft seal creates barrier between process seals and gearbox interior that can withstand pressures up to 275 psi to keep process fluid out of gearbox. Along with reverse pressure capability, seal offers straightforward retrofit method...

Read More »
Sundyne Ultra-Low NPSHr, High-Flow Pump Finds Midstream Success
Fluid & Gas Flow Equipment

Sundyne Ultra-Low NPSHr, High-Flow Pump Finds Midstream Success

ARVADA, Colo. - Sundyne, a leader in the design and manufacture of highly-engineered centrifugal pumps and integrally geared compressors for use in the global oil and gas production, refining, petrochemical, and chemical industries, announces an early application success for their recently introduced LMV-803Lr ultra-low NPSHr, high-flow pump. A long-time Sundyne customer recently ordered 9 total...

Read More »
Centrifugal Gas Compressors target power generation market.
Fluid & Gas Flow Equipment

Centrifugal Gas Compressors target power generation market.

Available in 20–7,500 kW range, fit-for-purpose Centrifugal Gas Compressors offer optimal solution for aero-derivative, industrial, and frame type gas turbines rated from 20–500 MW output. Skid-packaged fuel gas boost compressors ensure steady supply of fuel gas at precise pressures needed for optimal turbine operation. Units provide oil-free operation and smooth, centrifugal flow that...

Read More »
Pump Protection System is cUL, ATEX, and IECEx approved.
Electrical Equipment & Systems

Pump Protection System is cUL, ATEX, and IECEx approved.

Using ultrasonic probe to monitor gas inside process fluid as it passes through sealless magnetic drive pump, VapourView provides early warning of incorrect priming, venting, cavitation, or entrained process gas. Warning signal is sent to process operator when ultrasonic probe detects presence of even minute gas levelsÂ- — as low as 1% per volume. Operating from -40 to 356°F, system...

Read More »
New API 685 GSP Magnetic Drive Pumps are Equipped with In-Line Self-Cleaning Filters
Fluid & Gas Flow Equipment

New API 685 GSP Magnetic Drive Pumps are Equipped with In-Line Self-Cleaning Filters

Sundyne’s API 685 GSP Sealless Magnetic Drive Pumps are designed with UOP compliant construction materials. Units are embedded with VapourView™ technology, which provide early warnings for incorrect priming, venting, cavitation or entrained process gas. The self-cleaning filters circulate clean liquid around bearings by removing particulates. Units come with secondary containment system and...

Read More »
New Sunflo P-3400 Pump from Sundyne Features Modular Shaft Assembly
Fluid & Gas Flow Equipment

New Sunflo P-3400 Pump from Sundyne Features Modular Shaft Assembly

Sunflo Industrial Grade P-3400 Pump is designed for boiler feed, reverse osmosis, well injection and NOx suppression. Unit delivers flows of up to 500 gpm and heads up to 5,200 ft. The pump is equipped with heavy-duty carbon steel frame assembly, newly-designed impeller, heavy bearing system and an improved gear set for transmitting 60-percent increase in torque. Unit’s modular shaft assembly...

Read More »
Sunflo Industrial Grade Pumps feature suction inducer technology.
Fluid & Gas Flow Equipment

Sunflo Industrial Grade Pumps feature suction inducer technology.

Sunflo Industrial Grade P3000 Pumps come with single-stage, 316-stainless steel construction and thrust bearings in shaft assembly that helps in handling axial thrust without problematic balancing devices. The seal cooling process circulates the process fluid from the seal chamber through a seal flush cooler and back into the seal chamber that reduces fouling. Unit’s suction inducer technology...

Read More »
Sundyne's LMV 801 Line of Direct Drive Pumps adds a series of enhancements and optional upgrades.
Fluid & Gas Flow Equipment

Sundyne's LMV 801 Line of Direct Drive Pumps adds a series of enhancements and optional upgrades.

Sundyne's  LMV 801 line of driect drive centrifugal pumps now offer an optimized API 610 (OH3 or OH5) pump to address flows to 380 gpm (86 m³/hr), and heads to 720 ft (219 m), and a variety of optional upgrades, including the API 682 cartridge seal to prevent errors in installation and common seal failures, and the API 685 sealless magnetic drive to eliminate emissions and improve...

Read More »
ZeroLoss™ Containment Shells feature carbon fibre.
Materials

ZeroLoss™ Containment Shells feature carbon fibre.

ZeroLoss™ Containment Shells are made of poly-ether-ether-ketone composite material. Units are operated in a temperature range of -40°C to +150°C and help to reduce eddy current losses in the pump. Products are suitable for military and aerospace equipment applications and are designed for sealless magnetic drive pumps.

Read More »
Gearbox Output Seal increases MTBR for pumps, compressors.
Mechanical Components and Assemblies

Gearbox Output Seal increases MTBR for pumps, compressors.

Designed for use with Sundyne integrally geared pumps and compressors, SundSEAL minimizes leakage and increases Mean-time Between Repair (MTBR). This output shaft seal creates barrier between process seals and gearbox interior that can withstand pressures up to 275 psi to keep process fluid out of gearbox. Along with reverse pressure capability, seal offers straightforward retrofit method...

Read More »
Sundyne Ultra-Low NPSHr, High-Flow Pump Finds Midstream Success
Fluid & Gas Flow Equipment

Sundyne Ultra-Low NPSHr, High-Flow Pump Finds Midstream Success

ARVADA, Colo. - Sundyne, a leader in the design and manufacture of highly-engineered centrifugal pumps and integrally geared compressors for use in the global oil and gas production, refining, petrochemical, and chemical industries, announces an early application success for their recently introduced LMV-803Lr ultra-low NPSHr, high-flow pump. A long-time Sundyne customer recently ordered 9 total...

Read More »
Centrifugal Gas Compressors target power generation market.
Fluid & Gas Flow Equipment

Centrifugal Gas Compressors target power generation market.

Available in 20–7,500 kW range, fit-for-purpose Centrifugal Gas Compressors offer optimal solution for aero-derivative, industrial, and frame type gas turbines rated from 20–500 MW output. Skid-packaged fuel gas boost compressors ensure steady supply of fuel gas at precise pressures needed for optimal turbine operation. Units provide oil-free operation and smooth, centrifugal flow that...

Read More »
Pump Protection System is cUL, ATEX, and IECEx approved.
Electrical Equipment & Systems

Pump Protection System is cUL, ATEX, and IECEx approved.

Using ultrasonic probe to monitor gas inside process fluid as it passes through sealless magnetic drive pump, VapourView provides early warning of incorrect priming, venting, cavitation, or entrained process gas. Warning signal is sent to process operator when ultrasonic probe detects presence of even minute gas levelsÂ- — as low as 1% per volume. Operating from -40 to 356°F, system...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers