National Renewable Energy Laboratory (NREL)
Golden, CO 80401
Share:
Pipe Milling End Prep Tool is used in subsea pipelines.
Prepzilla MILLHOGÃ-® features rigid blade lock system and T-15 tool steel cutter blade that transfers heat away from pipe surface to chip. Suited for prepping Super Duplex, stainless steel, and other hard pipe, it can sever 8 in. schedule 160 pipe within 10 min and then compound bevel and face it simultaneously. Tool has one mandrel and 8 sets of clamps for prepping pipe from 1.5 in. ID to...
Read More »
CCD Camera suits extreme low light applications.
Integrating electron multiplication CCD sensors, 12-bit digital Sensicam em provides resolution of 1,004-1,002 pixels. It features thermo-electrical cooling of image sensor down to -45Ã-
Read More »
Peristaltic Pump targets ceramic applications.
Suited for handling of ceramic slip, SPX Zero Shear Pump is extremely gentle, imparting virtually no shear, aeration, or agitation on pumped product. It is virtually maintenance-free with no seals to replace, no check valves to clog, and no rotors or stators to wear out. Pump is unaffected by abrasive products because pumped ceramic slip is contained within tubing at all times. With self-loading...
Read More »
Power Driven Pallet Stackers offer 2,200 lb capacity.
Powered by two 12 V batteries, Power Stak(TM) Series offers lift heights of 62, 98, and 122 in. Narrow mast design and offset control handle provide clear view with virtually no blind spots. Forward and reverse drive thumb switches are located on both sides of handle to accommodate left or right hand operation. Auto reversing belly switch protects operators from potential injury when walking unit...
Read More »Process Gas Analyzer operates without requiring safety purge.
Intrinsically safe Servomex 1900 IR is approved for use in ATEX Category 2, Zone 1 hazardous areas without requiring safety purge. In addition to providing single percent level IR measurement for 0-10% and 0-25% CO2 ranges, product can operate with flammable samples such as H2 and C2H2. T4-rated unit uses single-beam, single-wavelength IR measurement technology in combination with digital...
Read More »
High Pressure Fittings come with PEEK or stainless nut.
With 2-56 threads, 360 Ã-µm High Pressure Fittings permit direct connection of 360 micron OD fused silica, PEEK, stainless, or electroformed nickel tubing without using liners. Lead-free connection that seals at pressures in excess of 20,000 psi can be formed with available manual tool. PEEK nut is supplied with glass-filled PEEK ferrule, while stainless nut uses 316 SS ferrule. Ferrule snaps...
Read More »Hosted Services deliver wireless sensor network data to web.
Suited for industrial and commercial enterprises, SensiNetÃ-® services let plant/facility managers and operators gain access to temperature and energy monitoring applications over Internet. With secure, automatic, real-time M2M connectivity to SensiNet wireless sensor networks, users can remotely receive data on any web-enabled device, then track and act on information. Services include...
Read More »Wireless Notebooks incorporate daylight-readable displays.
Equipped with Intel Core Duo processors, ToughbookÃ-® CF-19 convertible tablet PC and Toughbook CF-30 clamshell notebook respectively feature 550 nit screen with low-reflection coating and 1,000 nit LCD. MIL-SPEC-certified products have magnesium alloy cases, IP54 sealed keyboards and ports, and shock-mounted screens and hard drives. Along with various wireless options, models include cable...
Read More »CompactFlash Card operates from -40 to +85-
Offered in 4 GB and 8 GB versions, RoHS-compatible CompactFlash Cards work with SBCs, instruments, cameras, or computer systems with CompactFlash socket for program and data storage. Onboard error detection and correction algorithms are coupled with dynamic wear leveling techniques to deliver more than 2 million program/erase cycles. Since cards are True IDE Mode and ATA-3 compliant, they are...
Read More »Racks and Cabinets address critical IT infrastructure issues.
Featuring Liebert components for cooling, power distribution, cabling monitoring, and control capabilities, ready-to-deploy Knurr racks use infinitely variable mounting system that allows equipment to be installed at any position. Product line consists of 3 styles of 19 in. racks: server-style, open-frame, and distribution cabinets. In addition to support for Liebert Adaptive Architecture(TM)...
Read More »