SEVAAN GROUP Pty Ltd

Electronic Components & Devices

Isolation Systems protect against airborne contaminants.

AirShelter(TM) Isolation Systems use HEPA-filtered air to create contained, positive-pressure environments. Their main component is American Air Filter's AstroCel-® II HEPA filter. The combination of positive pressure ventilation(PPV) and HEPA filtration provides filtration levels greater than 99.97% on 1 to 5 micron particles. AirShelter line includes ceiling and floor-mounted HEPA filtration...

Read More »
Miniature Pneumatic Valve System has manual overrides.
Fluid & Gas Flow Equipment

Miniature Pneumatic Valve System has manual overrides.

Moduflex(TM) Miniature Pneumatic Valve System can be assembled in dual 3/2, 4/2 and 4/3 configurations in one island to meet application requirements (10 mm to 100 mm actuator bore sizes). Tie-rod connections are used to add or delete valves, as well as change valve function, tubing size or piloting. Moduflex Valve System consists of 2 valve sizes: 0.38 Cv and 1.13 Cv. Both have 2.5 mm stroke, 14...

Read More »
Control Valves are used with air, intert gas or vacuum.
Fluid & Gas Flow Equipment

Control Valves are used with air, intert gas or vacuum.

MicroKing 4-Way Air Control Valves are direct acting units designed to control actuators, pilot other valves, and for blow off and dispensing applications. They are available as inline or subbase versions offering M5 or 1/8 in. ports with flow of 0.18 Cv and 4.8 W solenoid. Valves feature built-in flow controls and choice of IEM or Subbase Bar manifolds with side or bottom porting, as well as...

Read More »
Soft Start Valves allow flow rates to 8.1 Cv.
Fluid & Gas Flow Equipment

Soft Start Valves allow flow rates to 8.1 Cv.

PHS Series Solenoid Quick Dump Valves, available in 3/8 in. and 1/2 in. body sizes with flow rates up to 5.7 Cv, shut off incoming pressure while exhausting downstream pressure when solenoid is de-energized. PHSSA Series Auto Pilot Soft Start Valves, available in 3/8 in. body size with 1/4 in., 3/8 in., and 1/2 in. NPT ports, and flow rates up to 3.8 Cv, allow gradual filling of downstream...

Read More »
IDC Systems are available in various sizes.
Construction Equipment and Supplies

IDC Systems are available in various sizes.

FFSD Series IDC system features contacts on 0.050 in. x 0.050 in. pitch and is available in double row designs. Assembly measures 0.200 in. tall and includes 4-finger Beryllium Copper contacts with 10 to 25 positons per row. Notch polarization is standard. TCMD Series system features contacts on 0.0787 in. x 0.0787 in. pitch with square Phosphor Bronze pins and 2 to 25 positions per row. TCSD...

Read More »
Switch Modules can be stacked to achieve desired voltage.
Electrical Equipment & Systems

Switch Modules can be stacked to achieve desired voltage.

PowerMod(TM) Solid-State Switch Modules are available as 6 kV (500 kW peak power), 9 kV (270 kW peak) and 12 kV (1 mW peak) plates. They are immune to arcing, emissions and lifetime limiting factors associated with conventional vacuum tubes. Modules require only dc voltage source and input signal, and can be passively air-cooled. Individual units measure 7 x 7 x 3 in. (6 and 9kV) and 12 x 12 x 3...

Read More »
Flyback Transformer features corona-free design.
Electrical Equipment & Systems

Flyback Transformer features corona-free design.

Model 4283-1100 High-Voltage Transformer drives high impedance loads requiring up to 7,500 Vrms. Providing primary-to-secondary isolation up to 18 kVdc, unit is suitable for applications requiring high-voltage, low to medium power including industrial lasers, ion generators, cathode ray tube transformers and traveling wave tube power supplies. Model 4283-1100 is particularly reliable in...

Read More »
Finishing Process tests 12,000 power devices per hour.
Test & Measurement

Finishing Process tests 12,000 power devices per hour.

Model M232 test/handling system for power devices completes device finishing processes for D-Paks and TOs. It has 32-position turret that accommodates up to 8 test stations for parallel testing. Each device undergoes electrical test, is laser-marked and inspected for mold and mark quality, and finally has 3D-lead inspection. Rejects are loaded into tubes. Part loading is via tube loader or direct...

Read More »

All Topics