Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Machine Vision Sensors see in color.
Legend 542C and 544C SmartImage Sensors perform color inspections, such as checking placement of color-coded fuses in car's fusebox; inspecting packaging print and decorations in full color; verifying color of fruits and vegetables in food processing; and verifying sequence of colored wires and components on circuit boards in electronics industry. Sensor resolutions of 640 x 480 and 1280 x 1024...
Read More »Vision Sensors plug into network.
Compact Legend 544 and 544C vision sensors have 1280 x 1024 high-resolution CCD, high-speed Hitachi SH4 Processor, and built-in Ethernet connectivity that lets sensor plug into existing network for real-time data transfer and remote diagnostics from any Internet connection. Both systems detect microscopic pinholes, stains, streaks, scratches, wrinkles, pits, bubbles, and tears. Model 544C has...
Read More »
Storage Server attaches anywhere on network.
RMS-7210 network attached storage Server has 1U high 19 in. rack mountable chassis. Configurable, expandable RAID system offers 4 ATA-100 hot swappable hard drives (up to 320 GB) and redundant, hot swappable 250 W power supplies. RMS-7210 allows for disk striping and mirroring, and has dual speed 10/100MB Ethernet/Fast Ethernet network interface card, dedicated SCSI ports, and socket 370 Intel...
Read More »
Abrasive Saw cuts 5 in. solids and 8 in. shapes.
Model K30PH 30 in. saw features air over oil power downfeed, 1 3/4 in. arbor with sealed ball bearings, 1,800 rpm spindle speed, and 25 hp motor with magnetic starter. It also includes cog belt drive, cam vise, heavy safety guard, and down stop. Stock conveyor is optional.
Read More »
Semi-Automatic Saw performs wet abrasive cutting.
Model K20E totally enclosed saw features 15 hp SD motor with magnetic starter, 1950 rpm 1 in. spindle arbor, and coolant pump system with dual coolant hoses. Operation includes manual feed with air over oil precise downfeed, and automatic saw head return at end of cut. Adjustable down stop limits depth of cut. Unit includes V-belt drive, sealed ball bearings, air chain vise, and front and side...
Read More »
Stainless Steel Ball Valves offer corrosion resistance.
Series 500 is available in female pipe end configuration with standard 1/4 turn lever handle, Slide-Lock locking handle, short and oval handles, panel mount, and with 360 deg welds on retainer nuts. Other configurations include male-female pipe end, 1/2 in. 90 deg ball valve, and sweat-end ball valves for use on tubing. All valves feature full port design for unrestricted flow, with reinforced...
Read More »
Pneumatic Fittings simplify motion control.
Blocking fittings mount on air cylinder port and use independent pilot air signal to block movement of piston rod at selected positions. Slow Start fittings control speed at which cylinders recover position. Flow Control Regulators are unidirectional and adjust speed of cylinder rod by controlling inlet or outlet flow. Inline Flow Controls mount anywhere and can be ganged together. Right Angle...
Read More »
Combination Sander includes belt and disc.
Model S613v is equipped with 6 x 48 in. belt and 12 in. solid aluminum disc. Belt side of sander features 6 x 10 in. worktable with 1/2 x 1/8 in. slot, 6 1/2 x 14 in. steel platen, and belt speed of 2800 fpm. Disc side features 8 x 14 in. cast iron worktable and disc speed of 2500 fpm. Sander is powered by 3 hp TEFC motor, and can be supplied with or without enclosed stand and built-in 100 cfm...
Read More »
Wet Benchtop Sander suits metallurgical laboratories.
Compact Model S4SWB is equipped with quick-change 4 x 36 in. belt with preset belt tension, internal pump, 1/2 hp single phase TEFC motor, and 4 x 6 in. platen. It weighs just 110 lbs and measures 20 x 20 x 12 in. high.
Read More »
Lock Down Head Saw cuts foundry gates and risers.
Model K20FS can be used in fixed saw arm position or as chop saw. Stepped in design on front allows easy access. Saw features 20 in. abrasive wheel, 2500 rpm 1 in. spindle with sealed ball bearings, steel top, and cast iron trunnions and arm.
Read More »