Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Belden Introduces Network Management Capabilities for Its Powersense Power over Ethernet Hubs
RICHMOND, IN - Belden, a world leader in the design, manufacture, and marketing of signal transmission products for data networking and a wide range of specialty electronics markets, announces the introduction of its Managed PowerSense Midspan Power over Ethernet Hubs. Power over Ethernet (PoE) is the technology that allows powering of such devices as VoIP phones, wireless access points, IP...
Read More »Steady Rest for Miniature Grinding
Arobotech Systems offers Grinding AUTO RESTÃ-® models for miniature grinding with standard clamping ranges down to 1mm diameter. These models feature the same follow down capability and one-micron repeatability as our larger rests. Special wear pad designs are available to fit almost every workpiece profile and clearance requirements.
Read More »Horizontal Boring Mills with Five Axis and Multi-Tasking Capabilities
Chicago, IL, September 6, 2006 - First introduced at the end of 2004, the new generation of Giddings & Lewis horizontal boring mills quickly became the fastest selling G&L product with more than 60 sold since their introduction. At IMTS 2006 Giddings & Lewis displays a rotary table boring mill, the RT 1250, with five-axis and multi-tasking capabilities. Fifth Axis Table-On-Table An optional...
Read More »
Completely Unload an Entire Rack from One Side
Sturtevant, WI -May 10, 2006 - In keeping with developing safe, ergonomic, innovative material handling products Topper Industrial introduces the slide shelf rack. The slide shelf rack allows an operator to unload an entire rack from one side eliminating the need to rotate a shelf rack. The Topper Industrial slide shelf rack is constructed with non-rusting roller mechanisms which improve the life...
Read More »
Pull Mount Bumpers are simple to install.
Without requiring mounting hardware or tools, BPM series is installed by pulling foot through 6.0-6.35 mm panel hole in 1.5 mm panel thickness. Pull mount ends can be cut off after application to save space, and bumper's rubber material provides shock and vibration protection as well as skid resistance. RoHS-compliant products, part numbers BPM-1 and -2, are rated for temperatures from -67 to...
Read More »
Quick Cable Glands provide slight strain relief.
Installed by pressing into panel manually, waterproof KCG Series is sealed until punctured by cables passing through. Units accommodate panel thicknesses from .059-.197 in. and are available in 2 sizes that accept wide range of cable bundle diameters.
Read More »
Valve minimizes dangers of air hose failure.
HOSE-FUZE(TM) senses high flow in line that occurs when hose or tubing suddenly fails and automatically reduces flow to minimize hose whip. Unit is available in port sizes from Ã-¼-1 in. with either NPT or BSP threads. Maximum operating pressure is 260 psig and temperature range is -4 to 275Ã-
Read More »
Controller maintains proper pressure on stamping presses.
Counterbalance Pressure Controller automatically corrects over- and under-pressure conditions that occur during press operations. Pre-programmed, 2-channel unit allows for user-selectable mix and match functions such as inner and outer counterbalance, dual cushions, counterbalance and overload, or counterbalance and cushion. Operating on 120 or 240 V, 50/60 Hz or 24 Vdc power, controller features...
Read More »
Low-Profile Power Inductors are suited for tight spaces.
RoHS-compliant 8200 series includes miniature, surface-mount I-core power inductors with inductance values from 1.0-470 Ã-µH and cd current ratings from 70 mA to 2.0 A. Operating from -40 to +85Ã-ºC, products have 3.2 x 2.5 mm footprint and come in heights to 2.3 mm max for designs with restricted PCB space and height. They may be exposed to peak reflow solder temperatures of 260Ã-ºC...
Read More »
Solid Carbide Tools offer small bore profiling.
Allowing customers to cut intricate ID forms, MICROBITÃ-® Tools provide small bore profiling and back turning down to 0.125 in. minimum bore. They are available in 1/8, 3/16, Ã-¼, 5/16, 3/8, and Ã-½ in. shank diameters with neck lengths of 0.375, 0.625, 0.750, 1.00, 1.250, and 1.750 in., respectively. All are offered with variety of coatings including TiN, TiCN, TiAIN, and Diamond.
Read More »