Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
AC/DC Desktop Power Adapters offer MTBF of 300,000 hours.
Offering output voltages of 12 V, 15 V, 24 V or 48 V, 300W TDM300 Series AC/DC Desktop Power Adapters are available in class I with IEC 320/C14 AC inlet and class II with IEC 320/C18 AC inlet. Featuring 8-pin Molex mini-fit female connector, units are housed in black-colored plastic package with LED power indicator. Operated from 0 °C to +40 °C temperature range, products come in 10 x 4.57 x...
Read More »
HWT-121O Touchscreen Monitor comes in 12.1 in. size.
Featuring open-frame construction, HWT-121O Touchscreen Monitor comes with bare-bones design. Equipped with metal LDC panel tray, vents and multi-touch projective capacitive technology, unit comes with resistive touch technologies. Offering optical bonding, product is suitable for self-serve kiosks, banking and aerospace industries applications.
Read More »
Rooftop Ventilation Line comes with 45 tons of cooling capacity.
Featuring 2 in. R13 foam insulation, Rooftop Ventilation Line offers heating capacity of 800 Mbh and performance capacity up to 13,500 cfm. Available in RV and RVE models, unit is suitable for schools, offices and government buildings applications.
Read More »
H-811.i2 Hexapod comes with load capacity of 11 lbs.
Equipped with low friction ballscrews brushless motors and controller, H-811.i2 Hexapod is available from 50 mm to 1 m base sizes. Offering travel ranges up to 34mm linear and 42° rotary, unit comes with 5 nanometers of strut resolution. Providing velocity of 20 mm/sec, product is suitable for optics, automotive and photonics applications.
Read More »
PharmaJet Blender Dryer is equipped with blower.
Drying blenders and tanks up to 150 cu-ft using forced air, PharmaJet Blender Dryer reduces wait times. Suitable for pharmaceutical industry, unit allows quicker reuse of blenders and eliminates alcohol wipe downs. Maximizing production time, blending capacity, and facility safety, product also dries parts, tank exteriors, walls and floors.
Read More »
PRO-Fit is used for copper and aluminum tubing.
Consisting of non-corrosion coated five bell-shaped flaring bits designed for 6, 7.5, 12, 16, 19 mm tubing, PRO-Fit™ Precision Flaring Kit comes in 19 x 28 x 5 cm plastic carrying case with interior foam organizer with cutouts sized to fit respective bits. Featuring ¼ in. diameter hex-shaft and ¼ in. hex chuck, kit is provided with four-color 7.5 x 11 in. instruction sheet.
Read More »
Wireless Flow Transmitter comes with internal high capacity lithium battery.
SFS-WP Intrinsically Safe Wireless Flow Transmitter can be configured between five seconds to one hour check-in intervals. Integrated with TRG turbine or JV-CG or JV-KG positive displacement flow meter, unit sends data through Modbus to a Gateway. Featuring passive inductive flow sensor and radio nodes are powered by lithium battery, transmitter’s ISM bands sustain radio signal strength up to...
Read More »X11 SuperBlade® Systems come with remote management software.
Supporting up to 20x 2-socket servers, 10x 4-socket servers or 20x Xeon® Phi based servers, X11 SuperBlade® Systems are optimized with 100 ns latency. Featuring integrated Battery Backup Power modules, units deliver maximized 100 Gb/s throughput. Compatible with 1x 100G Intel® OPA, 100G EDR InfiniBand switch and 2x 10G/25G or 4x 25G Ethernet switches, system is equipped with 20x...
Read More »
Retracting Micro Pins come with rap coupler integrated pneumatic cylinder.
Suitable for small, lightweight parts with minimal side load, Retracting Micro Pins can be used with and without backup. Featuring anodized aluminum construction and weld spatter resistant coating, units are available in 3-12 mm diameter and come with weld-field immune solid state switch.
Read More »
The Best Solution for Easy Automotive Rubber Assembly
There are an amazing number of rubber parts in a single automobile. It can be mindboggling to think of the various rubber components that are involved in the assembly of a car. O-rings, bushings, seals, hoses, engine mounts, belts, gaskets…any number of chassis, engine and suspension components are made of rubber or plastic. Rubber is naturally slip resistant, making it difficult to work with...
Read More »