Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Portable Data Logger OM-SQ2010
The OM-SQ2010 is a versatile general purpose data logger with 4 differential or 8 single-ended analog input channels to measure current, voltage, resistance and temperature, plus 8 digital channels to automatically trigger or stop logging. An RS-232 port is included, allowing connection to modems and other networking devices. The CE compliant portable data logger features a large easy-to-read...
Read More »
Digital I/O Interface Board is PCI Express X1 compliant.
Providing 16 optically isolated inputs and 16 Reed relay outputs, DIO-32.PCIe can be used for PC based control and automation of equipment including sensors, switches, A/V studio automation, security control systems, and industrial automation systems. It is available in 2 versions with inputs rated for 3-13 or 10-30 V, and socketed dip resistors allow user configurable input ranges from +2 to +30...
Read More »Ethernet Switches can transfer data at speed of 10/100 Mbps.
Available with both copper wire or fiber optic cable connections, iCON-32005, iCON-32008, and iCON-32160 can either be DIN-rail or panel mounted. iCON-32005 series have 5-port 10/100Base-TX or 4-port 10/100Base-TX plus 1-port 100Base-FX, where as iCON-32008 series is equipped with eight 10/100Base-TX ports, or six 10/100Base-TX ports plus two 10/100Base-FX ports. iCON-32160 series offers sixteen...
Read More »Touch Panel Computer has slim, 44 mm thin design.
Featuring NEMA 4/IP65 compliant plastic front bezel, GOT-5100TL supports low power AMD LX800 500 MHz processor with fanless operation and comes with 10.4 in. SVGA TFT LCD with 800 x 600 resolution. It is equipped with 1 MiniPCI slot, CompactFlash(TM) card plus 2.5 in. HDD for storage, and is available with optional fixed rotational WLAN antenna for wireless network connections. I/O interfaces...
Read More »
Voltage Controlled Oscillator operates from 2,480-2,960 MHz.
With control voltage range of 0.5-18 V, CVCO55CC-2480-2960 features typical phase noise of -106 dBc/Hz at 10 kHz offset and +7 dBm of output power. Available in 0.5 x 0.5 in. SMD package, it consumes 35 mA from input voltage of 8 V, and has second harmonic suppression at -15 dBc typ. Pulling and pushing are minimized to 1.5 MHz and 0.5 MHz/V, respectively. Suitable applications include digital...
Read More »
Non-Chlorinated Degreaser is environmentally friendly.
Designed for use in industrial and electrical applications, Insta-Solv(TM) non-chlorinated degreaser cleans and degreases oils, dirt, and grease from motors, chains, cables, gears, generators, power tools, and heavy equipment. Containing no Class I or Class II ozone depleting chemicals, degreaser is California Air Resources Board and Ozone Transport Commission compliant, and is NSF K1 registered...
Read More »
Software helps design commercial lighting system.
Designed for lighting specifiers and designers, Green Light Designer software processes data entered and adds appropriate Crestron products to suit project requirements. System design is accomplished in 4 steps: enter load schedule, shade schedule, control stations (type and characteristics of user interfaces), and sensors. Software outputs selection of reports, including Bill of Materials,...
Read More »
Polyurea Elastomer Joint Sealer seals concrete substrates.
With ability to cure to touch in 60 sec, CHEMTHANE 8190 two-part polyurea elastomer is suited for repairing spalled joints, as well as filling random cracks and patching gouges, holes, and surface defects. It cures in applications ranging from freezing conditions to 130Ã-
Read More »Step-Down Converter provides 3/1 A or dual 2 A outputs.
Operating from input voltage range of 2.25-5 V, LTC3546 is suited for single cell Li-Ion/polymer, or multicell alkaline/NiCad/NiMH applications. Each output is adjustable from 0.6-5 V and has turn-on supply tracking, while separate run and power good pins enable independent control of each channel. Switching frequency can be set at 2.25 MHz or is programmable from 750 kHz to 4 MHz, helping to...
Read More »Dynamic Signal Analyzer measures both temperature/vibration.
With both temperature and voltage input channels, USB-based 655u dynamic signal analyzer suits vibration analysis and monitoring applications. Unit offers Ã-
Read More »