Vizrt Ltd
Bergen 5011 NOR
Share:
Marking System sprays spots and stripes cleanly.
MicroMark(TM) uses precision spray valve and low-volume, low-pressure air to produce neat, consistent spots and stripes from 5 to 30 mm wide without overspray or clogging. Short microburst of air after each shot prevents clogging, reduces skipped shots, and cuts maintenance on automated production lines. Applications include color-coding, pass/fail status indicating, and process performance...
Read More »
Linear Actuators can be custom configured.
Electromechanical CATR actuators can be built using standard components such as motors, gears, screws, controls, and attachments to perform opening/closing, clamping/gripping, raising/lowering, or pushing/pulling functions. CATR 33 has ACME sliding screw for standard operation, CATR 33H has ACME screw, and CATR 32B has Ball screw. Options include stroke lengths, ac or dc motors, and friction...
Read More »
Hygro-Thermometer-Anemometer tests indoor air quality.
Model HTA30, with optional static pressure range from -5.00 to +5.00 kPu, measures humidity from 2 to 98% RH, temperature from 32 to 140 deg F, and air velocity from 20 to 6000 ft/min. It has both RS232 data link and single-selectable analog output. Probe can be replaced without recalibration. Model HTA30 is designed for HVAC, indoor air quality and industrial health industry.
Read More »
PC/104-Plus Board works as Ethernet node.
Bobcat single board computer can be used as Ethernet node, I/O processor card, or combined with plug-in video module for applications requiring video display. Module has Elan SC520 low-power 133 MHz 586-class processor, 10/100 Ethernet, 64 MB of RAM, and DiskOnChip flash socket. I/O includes floppy, IDE, and 4 COM ports for RS-232/422/485. Board is software compatible with Windows, QNX, Linux,...
Read More »Optical Receiver has wavelength of 2 micrometers.
Model R202, for LIDAR and eye safe free space applications, works in 1.2 to 2.2 micro spectrum, and operates in 3 GHz range with peak gain of 20 dB. Lower frequency limit is 30 KHz, but it can be ordered with dc option. Receiver has compact hermetic package, and comes with choice of optical input connector and type K coaxial RF output.
Read More »
Cap Applicator prevents skewed caps.
When paired with in NEM retorquer, NERCAE cap applicator will place caps on containers and tighten them down. It precisely places caps on containers, eliminating skewed or crooked caps. It can also be used in induction sealing applications when sealer is followed by retorquer to cap, seal, and tighten down caps. Applicator can handle CT and CR type closures. Depending on applicator heads, it can...
Read More »
Cylinder stays in position.
Model RA/8000 servo-controlled cylinder provides exact positioning of piston through electrical or pneumatic control signal as to be held in any desired position, even under changing load conditions. Positioning feedback mechanism included with cylinder links controller to piston rod. Cylinder is available in 63 to 320 mm dia, with stroke lengths from 100 to 600 mm, and electro-pneumatic (4 to...
Read More »
Exit Delay meets all firecodes.
iMXD integrated door movement exit delay package includes built-in delay electronics, audible alarm, and keyswitch for reset and authorized release in stainless steel housing. It can be configured to meet local and national firecodes governing delayed exit. Exit delay can be reset via keyswitch or automatically upon door closure, without need for additional external switches. It uses no moving...
Read More »Clean Adhesives do not interfere with touch screens.
ARclean(TM) 9008 and ARclean(TM) 9033 electronically clean adhesives can be used for perimeter spacer bonding in resistive touch screens and similar sensitive electronic devices. They minimize corrosion and reduce fogging and potential oxidation of oxide surfaces and conductive circuitry. Non-corrosive and low outgassing, they have virtually no effect on electrical performance properties. Both...
Read More »Hubs and Switches target industrial control rooms.
Magnum Ethernet hubs and switches have built-in fiber ports, which provide noise immunity and grounding protection for noisy environments, as well as future protection with fiber cabling that can support gigabit network speeds. 10 Mb, 100 Mb, and 10/100 Mb units are designed for tight spaces. 10/100 Mb hubs and switches offer auto-selecting dual mode capability on copper ports, allowing them to...
Read More »