VeriFone Holdings, Inc.
Paris 75010 FRA
Share:
Disconnect Switches can be used in hazardous areas.
MD2DS Series factory-sealed disconnect switches are engineered to meet NEC and IEC performance standards. Fused and non-fused 600VAC models are offered in 30, 60, and 100 Amp designs. MD2DS switches incorporate stainless steel bolts and hardware, copper-free aluminum enclosure with epoxy powder finish, and insulated, dual-color operating handle that indicates when switch is energized. Handles can...
Read More »
Horizontal Machining Centers are FMS system-ready.
HU50-5AX tilting trunnion table type machine accommodates part dia up to 27 in. and weights up to 1430 lbs. 50 taper spindles are available with up to 12,000, or 15,000 rpm and 40 taper up to 20,000 rpm. HU40T features max part dia of 20 in. 40 taper spindles are available with up to 12,000, 15,000, 20,000 rpm or 30 taper up to 40,000 rpm. Both machines hold 0.00012 in. true position through all...
Read More »
End Mills have long reach.
Solid carbide GLR series (square end) and BLR series (ball end) end mills are available in 2 and 4 flute configurations. Both are center cutting with 300 helix and have 0.020 in. reduced neck dia for extra clearance required in long reach milling applications. End mills are available in dia from 3/16 to 1 in. in 9 sizes. Shank dia tolerance is -0.0001 to -0.0003 in. T.I.R. maximum is 0.0005 in....
Read More »
Recording Sofware runs on PocketPC.
PocketDataSheet software package turns PocketPC into hand-held data recorder and digitizer. Users specify names, units and order of instruments to be read, plus out-of-bounds values and help files. Program provides multiple screens to allow for password entry, time stamp, individual data input, notes and maintenance calls. Each data entry is checked for abnormal values and, if appropriate,...
Read More »
Absolute Encoder operates at speeds to 6,000 rpm.
Single turn Absolute Series Accu-Coder Model 926 is available in variety of bore sizes in both blind hollow and thru-bore versions. It has thin, 1.38 in. profile, flexible mounting system, industrial grade integral bearings and digital signal that makes it suited for applications where presence of electrical noise is high.
Read More »
Metal Guards protect fluid coupling drive systems.
Type CFCG base mounted fluid coupling guards are made from powder coated steel/aluminum with stainless steel hardware. Available in sizes up to 40 in. dia, they have axial cooling vents to provide external inspection, improve fluid coupling cooling, and extend oil, bearing, and seal life. After sizing, large guards are simply trimmed to length and adjusted to height.
Read More »
Floor Pads reduce noise and vibration.
Nomad padding is available for floor and counter units, in 1/2 and 1 in. thicknesses. Pad material is resilient and will not lose its shape or deteriorate when heavy equipment is placed on it. It uses coated vinyl loop construction called that absorbs sound and vibration. It is resistant to fungus, mildew, acids, and organic solvents and will withstand bleach and other chemical bases such as...
Read More »
Analog I/O Board plugs into PC/104 port.
Model 104-AI012-8 provides 8 single-ended or true differential analog input channels with 12-bit resolution and 24 parallel bits of digital I/O. Software included with board supports ADC, DAC, counter, and digital functions, with sample programs and source in C and Pascal for DOS, and graphical setup program in Windows. Analog inputs are software programmable for 0-5V, 0-10V, Ã-
Read More »
Compressor Monitors check pressure and position.
Model 3500/72M Rod Position Monitor uses correlative measurements to confirm if excessive movement is due to rider band wear or other problems such as crosshead looseness or rod runout. Model 3500/77M Cylinder Pressure Monitor uses pressure transducers located on each chamber of cylinder, collecting pressure data and crankshaft position to provide information on condition of valves, piston rings,...
Read More »
Continuous-Flex Cables work in harsh environments.
Chainflex CF7 and CF8 resist oil and cutting fluids found in machine tool, hydraulic, construction, and automotive applications plus hydrolysis and microbe exposure hazards found in medical applications. Both are made with polyurethane jacket that provides flame-retardant and low-adhesion properties in temperatures from -40 to 176 Ã-ºF. They have polymer fiber core and extruded inner jacket....
Read More »