Tacton Systems
Stockholm 111 22 SWE
Share:
![Gear Reducer suits rotary positioning applications.](https://cfnewsads.thomasnet.com/images/medium/115/11556.jpg)
Gear Reducer suits rotary positioning applications.
Hollow-shaft Model RV-C offers through hole ranging from 1.2 to 5.4 in., suitable for allowing vacuum lines, wiring harnesses, concentric shafting, and cooling lines to be run through center. Torsional rigidity and overload torque capacity are rated at 500% of rated torque. Rated torque range is 867 to 27,754 lb-in. with peak torque range of 4,337 to 138,768 lb-in. Total lost motion from all...
Read More »![Spring-Loaded Probe provides non-slip connection.](https://cfnewsads.thomasnet.com/images/medium/115/11559.jpg)
Spring-Loaded Probe provides non-slip connection.
Series SMD offers tips designed for precision testing of surface-mount and high-density circuits. Model 8150 Micro Probe Kit contains 10 needle-point and cluster-point tips for positive connection to any surface. Probe features gold-plated tip; flexible silicone wire; and soft, comfortable handles. Micro Probe Kit is also available with retractable banana plugs (Model 8151).
Read More »![DC to AC Inverter suits LCDs backlit by 4 CCF tubes.](https://cfnewsads.thomasnet.com/images/medium/115/11554.jpg)
DC to AC Inverter suits LCDs backlit by 4 CCF tubes.
DMD Series DC-AC inverter provides wide-range dimming via analog signal for LCDs. It is suitable for use as power solution for LCD modules from 15 to 18 in. (diagonal) used in medical imaging applications, point-of-sales (POS) displays, kiosks, and desktop computer monitors. Inverter provides up to 23 W of output power, integrated input and output connectors, and onboard pulse width modulation...
Read More »![Linear Gauge Sensor uses linear glass scale technology.](https://cfnewsads.thomasnet.com/images/medium/115/11557.jpg)
Linear Gauge Sensor uses linear glass scale technology.
Model GS-251 has standard AGD 2 dimensions, and measures dimensions, thickness, curvature, eccentricity, displacement, height, depth, flatness, variation, runnout, roundness, distortion, deflection, and position. It maintains consistent accuracy to 0.0004 in. throughout its 25 mm range. With equivalent rating to IP-64, instrument includes waterproof seal and dust bellow. Its 6 ft signal cable...
Read More »![Digital Linear Actuator is available in two voltage ratings.](https://cfnewsads.thomasnet.com/images/medium/115/11558.jpg)
Digital Linear Actuator is available in two voltage ratings.
Series 26DBM bidirectional DLA provides linear resolution as fine as .0005 in. per pulse. Suitable for precise, measured control of fluids and gases, modified rotary stepper motor employs rotor that includes internally molded thread that mates to externally threaded shaft. Maximum pull-in rate is 600 step/sec. Series includes 24 models with Ferrite or Neodymium magnets and linear force to 8 lbs....
Read More »![Laser Marking System provides non-contact marking.](https://cfnewsads.thomasnet.com/images/medium/115/11551.jpg)
Laser Marking System provides non-contact marking.
MicroLase utilizes diode-pumped Nd:YAG laser operating at lower temperatures, eliminating need for external chillers. Unit offers precise, non-contact marking on plastic, paper, glass, metal, and ceramic at rates up to 150 characters per second. User-friendly software simplifies programming in Windows 95/98/NT environments. MicroLase offers 10,000 hours of virtually maintenance-free operation.
Read More »Plenum Cable meets fire safety standards.
Limited Combustible-rated (CMP-50) Unshielded Twisted Pair Cable is jacketed and insulated with FED fluoropolymer and has been tested by Underwriters' Laboratories to meet requirements for lower smoke emissions and less flame spread.
Read More »![Take-Up suits high speed stamping processes.](https://cfnewsads.thomasnet.com/images/medium/115/11546.jpg)
Take-Up suits high speed stamping processes.
Wyndmaster 324 incorporates 4-reel operation with side-by-side reel design, which allows machine to operate with both single strip and dual strip processes. It can function in both overwind and underwind mode. Machine can be programmed to operate with varying sizes of stamped parts, and up to 100 programs can be saved and protected with password. Motorized tangential feeder uses horizontal and...
Read More »![Inspection System offers 4-axis measuring.](https://cfnewsads.thomasnet.com/images/medium/115/11547.jpg)
Inspection System offers 4-axis measuring.
Microtop CNC gear inspection system provides full 4-axis, WindowsÃ-®-based, generative measuring capability. Shop-hardened, space-saving system is suitable for manufacturing cells and offers same analysis capability for parallel axis gears, worms, and worm shafts as larger Sigma Series machines.
Read More »![Inspection Systems combine probe, drive, and control.](https://cfnewsads.thomasnet.com/images/medium/115/11548.jpg)
Inspection Systems combine probe, drive, and control.
Sigma 3 and Sigma 7 systems utilize 4-axis generative motion with 3-D probe technology and high-speed linear motor direct drive. They come standard with WindowsÃ-®-based inspection software. Applications-specific software modules are available for cross-axis gears including bevel, spiral bevel, and hypoid gears, as well as worms and worm shafts, gear cutting tools, and other rotating...
Read More »