Acunetix
Portomaso PTM 01 MLT
Share:
Vacuum Lifter can pick up TVs weighing 1,000 lb.
APF Series has vacuum pad attachments with articulating pads that conform to curvature of television screen and have low-profile that fits between screen and box. Ergonomic handlebar has front mounted controls that let 1 person lift, handle, and package televisions and monitors. Lifter has reservoir, check valve, filter, and vacuum leakage sensor and alarm. Electric or compressed air operated...
Read More »
Soldering Iron Control also handles hot plates.
Compact Dial-Temp controller lets users make fixed temperature irons adjustable from 150Ã-
Read More »
Suction Diffuser provides optimum flow at pump inlets.
Series 731-G has removable fine mesh strainer and fine mesh sleeve that acts as start-up strainer. Pipe support bosses aid in proper alignment. Bosses tapped 1/2 in. NPT on either side provide pressure measurement, and plug provides system drainage. Diffuser is available in sizes from 3 to 16 in., and fitted for use with PN10, PN16, JIS 10K or JIS 20K flanges. Series is rated to 300 psi working...
Read More »
Fluorescent Lampholder is dedicated to fit T-8 lamps only.
Available in two versions, Cat. No. 13652 non-shunted and 23652 shunted for electronic ballasts, lampholder is suitable for indoor lighting applications. It has front push-in wiring ports for easy access, snap-in or slide-on mounting options, and 4-position positive-stop lamp-lock, which makes it simple for end-users to re-lamp in service. Rated 660W-600V, it is UL-Listed, CSA- and NOM-certified.
Read More »
Digital Controllers come with auto tuning.
SR8O Series is available in 3 package sizes: 72mm, 1/4 DIN, and 1/8 DIN. All units have inputs and ranges for thermocouples and RTDs, with user programmable scaling available for voltage, dc current, and mV inputs. Faceplate is drip and dust proof (IP66). SR83 1/4 DIN and SR84 1/8 DIN models are available with dual outputs that can be used for heat/cool control. All models have heater break...
Read More »
Pressure Sprayers operate on shop air.
Sprayers have no moving parts, operate on 80 psi shop air, and can spray liquids ranging in viscosity from light solvents to heavy, thick fluids. Liquids can be sprayed using wands ranging from 1/8 in. OD by 5 in. long to 1/4 in. OD by 8 ft long. Sprayers can be used for automotive, marine and industrial applications. Capacities range from 1 qt to 5 gal.
Read More »
DC/DC Converters feature isolated output.
5E Series offers input voltage ranges of 9-18, 18-36, and 36-72 Vdc. Units are available with single, dual, and triple low rippled regulated outputs. CMOS/TTL compatible remote On/Off control allows converter output to be turned on or off as necessary. 25/30 watt converters feature continuous short circuit protection and do not require heat sink. They have 6-sided shielding and can achieve...
Read More »
Diode-Pumped Lasers have lifetime of 10,000 hours.
Diode-Pumped Solid State Lasers are available in Visible and Near-IR Series. Three wavelengths in Visible Series include 405nm (violet), 475nm (blue) and 532nm (bright green). Nd:YVO4 lasers operate at 1064nm and are suited for optical trapping, wafer inspection, particle counting, metrology, printing, pointing, and photoluminescence. Lasers include beam attenuator, 6 ft coaxial cable terminated...
Read More »
Sample Receivers maintain constant pressure.
CPC1 and CPC2 constant pressure sample receivers are designed for receipt, handling, and storage of liquid and gaseous hydrocarbon samples, which are maintained at constant pressure by pre-charging cylinders with gas. Design features include stable non-roll square section construction, built-in sample volume indicator, and glycol filled gauges. Operating temperature range is -20 to 100 deg C and...
Read More »
Check Valves have cracking pressures from 3 to 90 psi.
ICS Slip-In Type Check Valves and ICT SAE Threaded Check Valves are available in nominal sizes from 02 to 48. They feature all steel construction with hardened, lapped discs and seats providing positive fluid shut off. Seal compound can be Buna-N or Viton. Valves can be used in various fluid power applications to eliminate external leak points associated with line mounted check valves.
Read More »