AMETEK Petrolab Company    Broken Arrow, OK 74012
Jan 27, 2012 Offering gas and electric ignition options, Petrotest PMA-5 performs flash point testing of petroleum products using Pensky-Martens closed-cup ASTM D93 A, B, and C methods. Bench-top system includes over-temperature protection circuit, splashproof membrane key panel, and built-in sensor for automatic barometric pressure correction. Able to heat samples while performing tests unattended, tester can keep liquid at temperatures above 150°C, allowing for immediate start of stirrer.

AMETEK Petrolab Company    Broken Arrow, OK 74012
Jan 12, 2012 Incorporating mid- and near-IR spectroscopy, portable MINISCAN IRXpert performs compound analysis according to international standards. Intelligent, self-learning analyzer uses 12,000+ data points from IR spectrum to determine concentration of molecules in sample and can yield from that spectrum a fingerprint of 40+ important fuel properties. Features include temperature controlled density meter, full-color touchscreen, as well as USB and Ethernet interfaces.

Spectro Analytical Instruments Inc.    Marlborough, MA 01752
Oct 19, 2011 SPECTRO xSORT energy dispersive X-ray fluorescence (EDXRF) spectrometer enables in-field elemental testing and spectro-chemical analysis of metals and other materials. Available with integrated video camera and GPS, instrument provides grade identification and material verification for metals and most alloys within 2 sec of clicking trigger; light-metal alloys require 12 sec to process. Other features include grade libraries, SDD detector, and detection limits down to ppm range.

E Instruments International LLC    Langhorne, PA 19047
Aug 23, 2011 Used to meet needs for boiler and burner setups, service, and maintenance, BTU900 uses field-replaceable sensors that facilitate diagnostics and replacement. Unit is available in 2 or 3 gas options (O2, CO, CO2); can be upgradeable to NOx; and comes with memory and software. Featuring unbreakable metal connections, unit has built-in manometer, thermometer (ambient and flue gas), and 0-8,000 ppm CO leak detector. Rechargeable battery and AC charger standard are supplied as standard.

GAO Tek Inc.    Toronto M1B2K4  Canada
Jun 03, 2011 Offering wavelengths of 1,310 and 1,550 nm as well as auto and manual measurement modes, model A0840006 is designed for fiber optic network applications. Device provides standard, compressed, and curves print modes in addition to max dynamic range of 35/34 dB and stable source output power of -8 dBm. Other features include diverse reports, visible fault location (VFL) function, 1.6 m event dead zone, 0.025 m resolution, and 128 k sampling points.

Emerson Process Management    Austin, TX 78754
May 24, 2011 Designed for field maintenance technicians, 475 Field Communicator has icon-based, touchscreen interface that provides task-based menus for users to connect to field devices and carry out maintenance or troubleshooting routines. Included ValveLink(TM) Mobile software application delivers control valve diagnostics in field for Fisher® FIELDVUE(TM) instruments. Device allows viewing and storing of diagnostic data, which can also be uploaded to AMS Suite for additional evaluation.

GOEPEL electronics LLC    Austin, TX 78759
Apr 12, 2011 Working within framework of Boundary Scan hardware platform SCANFLEX®, desktop SFX/COMBO1149-(x) series enables combination of numerous strategies for testing, programming, as well as design validation. It supports new and upcoming standards, such as IEEE 1149.7 and IEEE P1687 and offers hardware extension slots to provide additional scalability. Series provides USB2.0 and Gbit LAN interfaces as well as 4 programmable and adjustable integrated Test Access Ports.

Keithley Instruments GmbH      Germany
Apr 08, 2011 Offering 4-quadrant voltage and current source/load coupled with precision voltage and current meters, SourceMeter® Model 2651A characterizes high power electronics. Unit can source or sink up to 2,000 W of pulsed power or 200 W of DC power. It can also make precise measurements of signals as low as 1 pA and 100 µV at speeds up to 1 µs per reading. For precise characterization of both transient and steady-state behavior, Model 2651A provides choice of digitizing or integrating measurement modes.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Dec 15, 2010 With warm-up time of less than 30 min, self-diagnostic OCMA-310 assesses amount of trace hydrocarbons in soil or water and also checks for residual hydrocarbons on pre-cleaned products. Extraction of oil can be done by Freon 113 or S-316, and used volumes of latter may be recycled by HORIBA's optional solvent reclaimer. Pyro-electric sensor gives full dynamic range from 0-200 mg/L, and manual control via extraction/drainage valve system ensures sample is measured properly.

Labthink Instruments Co.,Ltd.    JINAN   China
Dec 10, 2010 Suited for testing middle and high barrier films, foils, membranes, sheets, and packages, PERME(TM) OX2/230 Oxygen Transmission Rate Test System uses coulometric sensor combined with 3 testing chambers integrated in one block technology. With one master base able to connect 9 satellite modules, system has capacity to test 30 specimens simultaneously and independently. PERME(TM) OX2/230 conforms to all international standards.

Labthink Instruments Co.,Ltd.    JINAN   China
Dec 10, 2010 Using advanced chromatograph analysis technology, PERME(TM) OR2/410 Test System can provide accurate organic gas transmission rate and coefficient of various kinds of films, membranes, sheets, and packages. System is controlled by computer and is suited for companies in areas of food, beverage, and cosmetics, as well as researchers who want to evaluate and control organic gases such as benzene, ester, and aldehyde transmission.

Kin-Tek Laboratories    LaMarque, TX 77568 4202
Nov 29, 2010 Using standard permeation tubes, computer-controlled FlexStream(TM)/SD blends single digit ppt mixtures with total dilution flow of 10 L/min or less. First stage combines flow of analyte vapor from Trace Source(TM) permeation tube with precisely controlled dilution gas flow to form ppb concentration primary mixture. In second stage, aliquot of primary mixture is further diluted to form ppt mixture. Permeation tube parameters and concentration requirements are entered via front panel touchscreen.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Oct 15, 2010 Torsional stiffness apparatus 108 measures flexibility and stiffness of leather or other bendable specimen. Mounted to rigid stand, instrument includes torsion head with dial protractor that is turned in plane normal to device's fixed torsion wire, until specimen is twisted 90°. Torsion values are obtained by measuring applied angular twist required to reorient sample 90° or other specified setting. Unit is based on apparatus described in test method ASTM D2821.

APREL Laboratories    Nepean, ON K2R1E6
Sep 02, 2010 EM-ISight compact system identifies location of EMI noise sources to precision of ±0.05 mm. It employs DENSO 5- or 6-axis articulated robot that allows horizontal, vertical, and rotational scanning of device in situ, resulting in 3D measurement profile. System's dynamic-touch feature automatically determines position of test probe above each component. Allowing testing to JIS T060-1-1-2 and IEC 60601-1-1-2, it offers frequency range of 100 kHz to 6 GHz and test area of up to 700 sq mm.

Industrial Test Systems, Inc.    Rock Hill, SC 29730
May 25, 2010 Using ½ in. circular paint sample, Lead Paint Check startup kit indicates lead concentration. Sample, cut up in smaller pieces and homogenized in ACID-1 acid solution, is diluted with water and then added to built-in photocell of eXact® LEADQuick(TM) Photometer. Once sample is zeroed, 2 drops of Pb-2 Buffer are added, and eXact Strip Pb-3 is dipped in sample for 20 sec. After 1 min, photometer measures optical density as absorbance number, which indicates lead concentration in sample.

GAO Instruments Inc.,    Toronto   Canada
May 06, 2010 Designed to measure error rate of data communication and analyze line faults and their causes, Model A0300005 is suited for routine maintenance of 2M systems and N×64K communication channels. Handheld unit stores up to 9 test settings and 20 groups of test results in onboard memory to avoid data loss in event of power failure. Test results can be transmitted to computer for storage, analysis, and printing. Configured with internal rechargeable battery, analyzer operates continuously for 8 hr.

Seco-Larm    Irvine, CA 92606-5012
Mar 31, 2009 Featuring DC jack input for directly plugging into DC power sources, ST-BT01Q 12 Vdc tester performs voltage, load, polarity, voltage drop, and PTC fuse tests. It features overheat protection, 6 LEDs and illuminated power connector to clearly show results of each test, and uneven-length alligator clip test leads to prevent them from touching while tests are being performed. Testing voltage on-site without multimeter, unit can check voltages under 1 A or 500 mA loads.

Koehler Instrument Co., Inc.    Bohemia, NY 11716
Mar 05, 2009 Heated Oil Test Centrifuge incorporates LCD touchscreen control panel that can be used to govern centrifuge rotation speed, turn heat on/off, set duration of test, and choose type of rotor assembly and corresponding glassware to be used during test. Manufactured to meet Class 1, Division 2 explosion resistant rating, system conforms to range of Standard Test Methods and features top-opening lid that provides access to rotor and tube holders and features 18½ in. dia viewing window.

Saelig Co., Inc.    Pittsford, NY 14534
Jan 19, 2009 APSIN6000(TM) Broadband Signal Generator combines signal purity (phase noise -128 dBc/Hz at 1 GHz and 20 kHz offset, harmonics less than -40 dBc) with rapid power/frequency switching and settling time, offering a resolution of 0.001 Hz from 9 kHz up to 6.4 GHz. Compact enclosure (6.7 x 4.7 x 8.7 in.) allows multiple synchronized units to be stacked, and instrument can be accessed remotely via RJ-45 LAN interface. APSIN6000(TM) weighs less than 6 lb, making it suitable for portable use.

Megger    Dallas, TX 75237
Dec 18, 2008 Designed to test and certify electrical installations, Model MTB7671 is capable of checking insulation, continuity, loop, and RCD testers. Unit ensures that instruments are delivering accurate results, and are capable of meeting requirements of 17th Edition of IEE Wiring Regulations. Test functions are color-coded, and pass/fail limits are incorporated for all parameters where such limits are published.