Water Testers

Test & Measuring Instruments, Sensors, Monitors & Transducers

Submersible Level Transmitter monitors wastewater.

August 25, 2015

Featuring corrosion-resistant design that is submersible to 1,100 ft, Model 311-M351 supports challenging wastewater lift station monitoring applications. Unit is available in standard ranges from 0–10 through 0–1,100 ft WC, with choice of 4–20 mA or 0–5 Vdc output. To eliminate process clogging, transmitter incorporates 3 in. diameter clog-resistant sensing diaphragm and corrosion-resistant protective baffle plate. Integral lightning and surge protection is standard. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Magnetic Flowmeter suits utility water applications.

August 13, 2015

Offering intuitive solution for utility, water, and wastewater measurement, Rosemount® 8750W features welded coil housing for protection against moisture ingress, dual compartment transmitter housing to keep electronics fully isolated from moisture, and replaceable terminal block which enables repair in field without replacing entire meter. System also provides intelligent diagnostics, including SMART Meter Verification, grounding and wiring fault detection, and electrode coating detection. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Handheld Photometer communicates with smartphone/tablet.

August 7, 2015

Used to measure water quality in fresh and marine water settings, eXact iDip® 570 Smart Photometer™ integrates 2-way wireless communication with smartphone/tablet via Bluetooth® Smart (4.0). Multilingual app promotes lab accuracy while enabling upgrades, test parameter customization, mobile sharing, and data organization. Able to test 35+ water quality parameters through 4-step process, waterproof (IP67) unit automatically computes several values without any hand calculations. Read More

Test & Measuring Instruments

Water Quality Meter uses Android app.

April 27, 2015

With SAM-1 App, SAM-1™ Smart Aqua Meter transforms Android smartphones or tablets into pH, ORP, or Conductivity/TDS meters with integral temperature measurement. Unit plugs into headphone jack of device and connects to Sensorex smart analytical sensors. Instantly recognizing smart sensor, app provides interface for measurements and managing data. Readings can be tagged with GPS location and user comments. Stored data can be transmitted via email and opened in Excel for analysis and reporting. Read More

Test & Measuring Instruments

Testing Kits measure craft brewer's water quality.

April 16, 2015

Using handheld eXact iDip® Smart Photometer System, Smart Brew™ Kit and Smart Brew Advanced™ Kit measure key parameters for making beer taste best, including calcium hardness, chloride, magnesium hardness, pH, sodium, sulfate, total alkalinity, and total hardness. Both integrate 2-way wireless communication with smartphone using multilingual app. Smart Brew Advanced™ kit additionally includes VisionPlus digital pH meter so brewers can monitor pH from start to finish. Read More

Test & Measuring Instruments

Water Tester simplifies chlorine demand measurement.

March 16, 2015

Measuring amount of chlorine consumed by ammonia, iron, manganese, and other organic materials, CD-2000 provides advanced information such as Chlorine Demand in raw water. Corresponding amount of chlorine is added to achieve clean water with consistent level of residual chlorine. Suited for daily control and research purposes, instrument can measure chlorine demand in diverse water types and provide measurement without interference from turbidity or color of water. Read More

Test & Measuring Instruments, Waste Handling Equipment, Services

Water Treatability Testing offers facility-specific options.

November 3, 2014

Treatability lab performs water reuse feasibility studies, develops treatment programs, conducts full treatability analysis, and trains operators on water treatment chemistry. After test request, treatability analysis report provides water study results and conclusions. This includes recommendations for most effective treatment program for that facility's wastewater. Water reuse feasibility rating can also be provided, which details how much wastewater can be recycled back into facility. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Ultrasonic Flowmeter improves water and heat metering accuracy.

October 14, 2014

Operating for up to 20 years on one A-size battery, solid-state MAXREFDES70# can measure as little as 0.5 Lpm of water with better than 1% accuracy as well as detect minor leaks. Ultrasonic pulses can be customized to frequencies required by flow conditions, and design is resistant to contaminants and wear. Integrated MAX35101, complete time-to-digital converter with analog front-end, supports flow measurement at low rates (<30 Lph) and offers time-to-digital conversion accuracy of 20 ps. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Waste Handling Equipment

Water Quality Tester detects toxic metals.

June 3, 2014

Designed to determine toxic metal levels in tap water, SenSafe® Water Metals Check Test Strip develops red in presence of toxic metals above 10 ppb in 2 minutes. Product can detect cadmium, cobalt, copper, lead, mercury, nickel, and zinc (+2 valence metals), confirming need for filtration or remediation of any water. Instructions and color chart are provided. Read More

Test & Measuring Instruments

Handheld Photometer transfers water test data to smartphone.

May 15, 2014

Using Bluetooth® Smart wireless technology, eXact® iDip® wirelessly connects with iPhone®, iPad®, and iPod Touch® devices. Photometer uses 4-step Reagent Delivery Method to test water of pools, spas, and other water sources. User selects test, pushes button, and dips eXact® reagent strip into built-in 4 mL water sample cell for 20 seconds using gentle back and forth motion. Test data can be shared via email, and built-in GPS feature allows for retrieval of water locations. Read More

Test & Measuring Instruments

Modular Benchtop Meter measures DO, pH, conductivity, and more.

May 8, 2014

Complementing pH, conductivity, ion concentration, and ORP measurement capabilities, SevenExcellence v2 helps researchers and analysts replace or supplement traditional multi-step dissolved oxygen (DO) measurement methods as well as reduce process waste. Instrument can measure up to 3 parameters in parallel and allows for biochemical oxygen demand (BOD) assessment. Guided UI and 7 in. touchscreen aid operation, while connectivity facilitates results recording and analysis. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Electromagnetic Flow Meter achieves accuracy rate of ±0.3%.

April 17, 2014

Combining general purpose detector with amplifier, ModMAG® M1000 features non-intrusive open flow tube that virtually eliminates pressure loss. Unit has no moving parts to impede flow stream, keeping maintenance to minimum, even in less than ideal fluid conditions. Available in ¼–8 in. sizes, meter provides flow range of 0.03–12 m/s and is best suited for bi-directional flow measurements of fluid >5 µS/cm. Amplifier includes LCD and is housed in weather-resistant, NEMA 4X (IP66) enclosure. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Acrylic Flow Meters feature interchangeable scales.

April 15, 2014

Configured for panel mounting, Series 6A02 is available with interchangeable direct reading scales for Water, Argon, Oxygen, Carbon Dioxide, Nitrogen, and Helium. Scales are mounted at front of flow body and are positioned and secured by clear front plate. Displaying flow rates in both metric and English units, meters feature max temperature of 150°F, max pressure of 100 psi, and accuracy of ±3% full scale. Low hysteresis, multi-turn needle valve is included. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Acrylic Flow Meters offer interchangeable scales.

March 19, 2014

With respective flow capacities of 50 scfm, 10 gpm, 2,200 scfh, 2,400 scfh, 2,200 scfh, 2,650 scfh, 6,350 scfh, and 10,000 scfh, 6A03 series offers interchangeable, direct reading scales for air, water, argon, oxygen, carbon dioxide, nitrogen, helium, and hydrogen. Dual scales display flow rates in both metric and English units, and yellow back promotes readability. Supplied with in-line ¾ in. female NPT connections, meters deliver ±3% FS accuracy and have 316 stainless steel float and guide.
Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Clamp-On Ultrasonic Flowmeter has 0.33-32.8 fps measurement range.

March 14, 2014

Series UFM can measure velocity and flow in 0.98–4.62 OD steel, copper, and plastic pipes with accuracy of ±3% of flow reading for >0.98 fps. Supplied in IP54 plastic polycarbonate enclosure, 2.9 lb unit comes with volume pulsed output and 4–20 mA flow rate output. Capable of displaying instantaneous and totalized flow, meter incorporates backlit, 3.27 x 0.74 in., 2 line x 16 character screen for displaying text. Uses include monitoring/metering water flow in Building Automation Systems.
Read More

Test & Measuring Instruments

Handheld Photometer utilizes Bluetooth® technology.

December 17, 2013

With Bluetooth® Smart wireless technology, eXact® iDip™ provides complete wireless connectivity between iPhone®, iPad®, or iPod Touch® and handheld photometer. Test data from pool, spa, and other water sources is stored by application and can be shared via email, while built-in GPS features allow for retrieval of water locations. iDIP4 Reagent Delivery Method provides smooth, precise reagent dispersion into samples without leaving suspended solids in sample vial. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Electromagnetic Signal Converter measures volumetric flow.

December 2, 2013

With accuracy of 0.5%, Model IFC 050 can be combined with OPTIFLUX and WATERLFUX flow sensors for wastewater treatment metering tasks as well as water distribution networks, irrigation installation, water abstraction, and CIP cleaning stations. Outputs represent measured values for flow, mass, and conductivity. They include current, active pulse/frequency, status, and Modbus. Protected with dual-layer paint, housing keeps converter safe from fluids such as salt water. Read More

Test & Measuring Instruments

Water Cut Monitor includes temperature compensation.

October 4, 2013

Accommodating temperatures up to 160°F, Universal IV CM delivers accurate water cut measurement in 0–1%, 0–5%, 0–10%, and 0–30% ranges with accuracy down to 0.03% water and resolution down to 0.0002% water. Perm-A-Seal sensing element installs directly into main process line, and Cote-Shield™ technology ignores coating buildup on probe. Equipped with built-in LCD and keypad, monitor can be configured for NPT or flanged mountings and can be installed in all common pipe diameters. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Acrylic Flow Meters offer built-in needle valve option.

August 16, 2013

Able to perform metering control functions where space is limited, ACRX Series offers selection of one interchangeable direct reading scale for Air, Water, Argon, Oxygen, Carbon Dioxide, Nitrogen, Helium, or Hydrogen. Units have 316 SS float and guide as well as yellow back plate to optimize readability. Configured for in-line ½ in. NPT connections, meters feature max temperature of 130°F, max pressure of 100 psi, and ±3% FS accuracy. With AXRX V model, multi-turn valve is installed at inlet. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Acrylic Flow Meters feature interchangeable scales.

July 29, 2013

Available with interchangeable direct reading scales for air, water, argon, oxygen, carbon dioxide, nitrogen, helium, and hydrogen, ACRX Series displays flow rates in both metric and English units. Yellow-colored back plate optimizes readability and helps minimize eye fatigue. Configured for in-line ½ in. female NPT connections, meters feature ±3% FS accuracy, max temperature of 130°F, and max pressure of 100 psi. Read More