Cincinnati Test Systems Inc.    Village Of Cleves, OH 45002
Mar 11, 2013 Sentinel C28-DP utilizes absolute transducer on 24-bit analog to digital circuit to measure test pressure, and differential pressure transducer on second A-D circuit to measure high resolution pressure changes during leak test. Measurement is converted to volumetric leak rate from automatic calibration cycle. Equipped with color graphic screen for navigation and viewing, Sentinel C28-DP provides differential pressure decay, pressure decay, drop, rate of change, and occlusion test types.

Mocon    Minneapolis, MN 55428
Oct 19, 2012 Developed for use with OX-TRAN® Model 2/61 Oxygen Permeation Test System, RACK-6™ offers separate 6-cell conditioning unit which enables flexible or rigid packages to be brought to equilibrium offline before moving them to OX-TRAN Model 2/61 for final test results. Container Transfer Units allow individual package transfer from conditioning unit to testing unit. Supplied with 12 CTUs, RACK-6 system allows for 6 samples to be conditioned while 6 samples are tested on OX-TRAN Model 2/61.

E Instruments International LLC    Langhorne, PA 19047
Sep 17, 2012 Suitable for HVAC professionals, Model 7899 Gas Sniffer effectively pin points small leaks of combustible gases and hydrocarbons from piping and appliances. Unit features large visual LCD and bar graph display, auto zero-drift adjustment, audio alarm, and hold function. To reach inaccessible points, detector includes 11 in. long flexible probe.

Mocon    Minneapolis, MN 55428
Apr 23, 2012 As combination testing system for packages with one-way degassing valves, MultiCheck® 425 measures headspace carbon dioxide (CO2) and oxygen (O2). System also performs pressure decay leak test, seal strength burst test, and one-way degassing valve performance test via Valve Test Unit(TM) (VTU). By combining 5 tests in one unit, product conserves time, labor, and samples needed to conduct individual testing; single package cycles through all tests on one unit.

General Monitors    Lake Forest, CA 92630
Feb 23, 2012 Suited for use in open, well-ventilated areas, Gassonic Observer-H senses airborne ultrasound emitted from leaking gas at high pressure. Detector has 20 m radius coverage zone for detection of leaks as small as 0.1 kg/sec and is designed for failsafe operation. In addition to HART communications, features include Modbus with single and block transfer modes, Emerson AMS Intelligent Device Manager support, and event logging. Unit is immune to changing wind directions as well as gas dilution.

Mocon    Minneapolis, MN 55428
Feb 16, 2012 With optical sensor that gives off light directly related to amount of oxygen present, OpTech® - O₂ system enables non-invasive, non-destructive thermoformed blister package testing. System complies with ASTM F2714, is stable in ambient light, and can determine oxygen headspace, dissolved oxygen, ingress, and permeation rate in flexible and rigid packaging under real-life conditions. Values are read in 0.5 sec, and oxygen measurement range is 0.001%-25%.

Uson L.P.    Houston, TX 77041
Feb 01, 2012 Providing 1 or 2 test channels with 4 sensors each, Optima vT features customizable pneumatics, multiple built-in automated calculators, full color touchscreen display, and variety of data handling and storage options. Unit is capable of vacuum decay tests, pressure decay leak testing, mass flow leak detection, and upstream/downstream cracking pressure tests, as well as testing for pressure rise, burst, laminar flow, force decay, and occlusion.

Packaging Technologies & Inspection - PTI, LLC    Tuckahoe, NY 10707
Jan 26, 2012 Utilizing vacuum decay technology and differential force measurement, VeriPac 410 performs non-destructive seal integrity testing and leak detection for blister packs, sachets, and low head space packaging. Multiple packages can be tested in one test cycle, and location of defective cavity is also identified where multi-cavity blister packs are concerned. Test results are quantitative and provide operators with definitive pass/fail result, eliminating subjectivity.

Abbess Instruments & Systems, Inc.    Ashland, MA 01721
Jan 13, 2012 Offered as front- or top-loading Acrylic Cylinder or Cube with or without aluminum frame and/or base, high-visibility vacuum systems include ASTM-compliant leak test chambers. Automatic control, data logging, and altitude Climb and Dive profiling to 100,000 ft are optional. Also, chambers for dry or wet leak testing are available. Basic system can be controlled manually, and Vacuum Cycle Controller can be added to automate vacuum/hold/vent control functions as well as vacuum monitoring.

Thwing-Albert Instrument Co.    West Berlin, NJ 08091
Jan 10, 2012 Compliant with ASTM E96 standard, 68-3000 EZ-Cup consists of aluminum cup and aluminum threaded flanged ring with 2 neoprene gaskets and Teflon seal that hold specimen in place. Design eliminates edge leakage and provides secure sealing of specimen between gaskets. Measuring 2.5 in. W x 2 in. deep, cup determines water vapor permeability of sheet materials up to 1/8 in. thick, such as specialty paper grades, polyethylene, building material, leather, and weatherproof clothing.

PrimeTest Automation    Boca Raton, FL 33487
Sep 13, 2011 Customizable leak test system verifies components and complete assemblies of mobile communication devices are properly sealed against air and water infiltration. Reliant upon precise fixturing and custom LabVIEW software with specialized test algorithms, solution records results so manufacturing process can be certified to quality control guidelines. System can be customized to handle range of applications and enabled to produce various reporting data and documentation.

FasTest, Inc.    Roseville, MN 55113-1317
Aug 05, 2011 Employing 24 Vdc drive system, Electronic Tooling System (ETS) allows for inside- or outside-part testing of leak sealing integrity. Modular electronic sealing device can operate as stand-alone sealing system or be controlled via I/O or connected via serial, Ethernet, or DeviceNet. By varying target current, device is scalable and provides repeatable sealing force. Sealing tool locks onto media, even under power loss, increasing test safety and reliability.

W. Amsler Equipment Inc.    Richmond Hill   Canada
Aug 01, 2011 Supporting runs of up to 250 bottles/hr, 5-head leak tester has flying head design that promotes output and flexibility. System accommodates plastic containers up to 2 L, using low-pressure air to detect holes as small as 0.006 in. dia. It can also detect fallen bottles, choked necks, and blocked necks. Controlled by servo motors, 5 heads travel with bottles along conveyor in enclosed system; extra heads can be added to unit to increase speed and productivity.

Mocon    Minneapolis, MN 55428
May 02, 2011 MultiCheck(TM) 400 combines O2 headspace, pressure decay leak, seal strength burst, and valve (leak and seal strength) tests, decreasing time, labor, and samples required to conduct individual assessment of packages with one-way degassing valves. Single package cycles through all of analyses on one unit, and included Valve Test Unit(TM) (VTU) measures values to tenths of pound/in.² System is suited for quantifying opening and sealing pressure levels.

RLE Technologies    Fort Collins, CO 80524
Mar 10, 2011 Able to signal leak locations in SeaHawk(TM) sensing cable within seconds of detection, SeaHawk LD2100 can function as stand-alone device or integrates with existing building management, network management, and building automation systems. Image of sensing cable reference map can be uploaded and configured in user interface to identify location of leaks as they occur. Web accessibility allows off-site facility supervision, and controller supports up to 32 virtual and physical detection zones.

Associated Research, Inc.    Lake Forest, IL 60045
Feb 03, 2011 Designed to help medical device manufacturers comply with agency specifications for electrical safety compliance testing, LINECHEK II 620L includes MD Voltage Display, which allows manufacturers to measure voltage drop across measuring devices as called out in IEC60065 and IEC60990. Leakage Current Display enables unit to comply with specifications requiring AC, DC, and AC+DC leakage measurements. Automated control is possible via Ethernet, USB/RS-232, or GPIB communication interfaces.

Mocon    Minneapolis, MN 55428
Nov 11, 2010 MultiCheck(TM) 300 provides packagers with all-in-one system that conducts tests for measurement of oxygen headspace, leak detection, and seal strength. Headspace results are determined by probe/pump system, and pressure is applied to determine seal strength. Suited for shelf life sensitive applications involving food, pharmaceutical, and medical products, system can be used to test variety of packages, including flexible, rigid, and composites.

Mocon    Minneapolis, MN 55428
Jul 07, 2010 PERMATRAN-W® Model 3/33 Plus tests water vapor transmission rate (WVTR) of films as well as finished flexible and/or rigid plastic-based packaging. For precise RH measurements, modulated IR probe is incorporated within test cell and high-precision sensor provides parts-per-million sensitivity. Also able to measure temperature, unit is available in 3 different master base control systems with 3 satellite modules, each supporting up to 20 test cells per system.

E Instruments International LLC    Langhorne, PA 19047
May 21, 2010 Featuring 11 in. fully flexible probe for hard-to-reach places, hand-held Model 7899 is equipped with highly sensitive tip to pin-point small leaks of any combustible gases and hydrocarbons from piping and/or appliances. Quick response leak detector features auto zero-drift adjustment, audio alarm, HOLD function, and large visual LCD and bar graph display. Readings are provided in ppm, %vol, and %LEL.

Flow Technology Inc.    Tempe, AZ 85284
Nov 02, 2009 Designed for flow measurement accuracy under dynamic temperature conditions, FT-LD system provides inferred mass measurements for leakage detection by correcting for temperature effects on fluid volume. FT Series turbine flowmeter, paired with LinearLink(TM) Temperature Compensated Interface (TCI), helps obtain precise leakage measurements for various fluids. Specifically, LinearLink TCI lends functionality for flow meter linearization, viscosity correction, and density compensation.