Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Jul 17, 2008 Series LDT monitors shaft seal and stator temp of submersible pump to help prevent failure. When leak is detected, output relay energizes, and LED indicator illuminates. Relay automatically resets when seal failure condition clears. NC temperature switch, mounted on stator, detects over-temperature, and bi-stable relay retains its position during power loss and latches on until remote reset button is pressed. Leak sensitivity is adjustable from 1 k to 35 kW.

InterTech Development Co.
Skokie, IL 60077 3220
Jun 18, 2008 Available in 6 models for 2- or 4-channel testing at 0-10, 0-3, or 0-1 psig, M1075-94X Pressure Change Leak Detectors feature transducer repeatability of 0.05% FSD, transducer sensitivity of less than 10^-5 STD, and 0.01 second timer increments. Up to 1,000 test records can be stored and analyzed. Used as stand-alone instrument or integrated with PLC or PC, detector includes touch panel that displays all phases of test status, including reasons for rejects.

Alcatel Vacuum Products, Inc.
Hingham, MA 02043
Apr 14, 2008 Suited for chemical, petrochemical, aviation, and oil processing industries, Extrima® can be used for leak testing of aircraft fuel systems and detection with diluted hydrogen as tracer gas in explosive environments where safety requirements are high. Auto-Ranging function automatically tunes instrument's sensitivity for precise leak location. IP67 waterproof rated unit provides 7 hr continuous operation from rechargeable batteries.

Photovac Inc.
Waltham, MA 02451 1166
Apr 01, 2008 Rated intrinsically safe for explosive environments, 2020ComboPRO utilizes photoionization detection (PID) technology to detect ethanol leaks in ethanol fuel production plants. Portable instrument has 0.1-10,000 ppm measurement range and meets/exceeds requirements of NSPS Subpart VV specific to EPA Method 21 for fugitive emissions. Critical data is displayed in less than 3 sec, and audible/visual alarms alert operator when pre-defined limits are exceeded.

RLE Technologies
Fort Collins, CO 80524
Mar 27, 2008 Designed to work in conjunction with SeaHawk leak detection cable, SeaHawk LD2000 distance read leak detection system pinpoints location of any conductive fluid on up to 2,000 ft of cable. It includes direct alarm notification via email or SMS, and web interface enables users to view status and modify system configurations. Unit allows for integration with existing building management systems via Modbus and BACnet, and/or network management systems via SNMP.

Spectronics Corp.
Westbury, NY 11590
Mar 12, 2008 With focused beam, OPTIMAX(TM) 3000 helps technicians pinpoint all refrigerant leaks, even elusive leaks that are missed by other lamps and by other methods of leak detection. Portable unit uses super-hi-flux LED technology equal to that of 150 W lamp. Powered by rechargeable NiMH battery, flashlight has inspection range up to 20 ft and 50,000 hour bulb life. Product comes with fluorescence-enhancing glasses and ac/dc battery charger.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Feb 08, 2008 Used to monitor shaft seal of pumps before failure, Series DLD dual-channel leak detection relay finds leaks by sensing status of float or conductivity switch installed in seal cavity. It offers NO relay contacts to energize alarm and deenergize pump in event of leak and includes LED indicator. Installed via 2-pin octal mount, unit is available in sensitivities of 10-25 kW adjustable and 4.7-100 kW adjustable. All models utilize 120 Vac control voltage.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Dec 05, 2007 Usable as dust collector emissions monitor and leak detector, standard Series PMT is designed for general maintenance planning and process protection applications. Adjustable linear or logarithmic output scaling enables trending of baseline and high peak emissions that are caused by filter cleaning cycles and developing leaks. Protective layers on probe work with induction-sensing to ensure reliable operation with all types of particulate.

Ellis Environmental Group LLC
Acworth, GA 30101
Nov 02, 2007 Release Detection and Remediation Response (RDR2) is used for detecting petroleum leaks of underground storage tanks and fuel lines. Using IR technology and notification system, it provides immediate response to underground hydrocarbon contamination, automatically informs owners about leaks, and starts clean up process. Subsurface metabolism enhancement can be used instantly to allow microbes to consume petroleum contamination leaving only harmless water and carbon dioxide.

Packaging Technologies & Inspection - PTI, LLC
Tuckahoe, NY 10707
Nov 01, 2007 Designed for package integrity testing of filled and sealed food pouches, retort pouches, and pharmaceutical and medical pouches, VeriPac 225 Leak Tester comes with flexible bladder that eliminates any stress on pouch seal during testing cycle. Different size pouches can be placed into testing drawer simultaneously and tested in one test cycle. Unit utilizes ASTM approved vacuum decay leak test method (F2338-05) recognized by FDA as consensus standard for package integrity testing.

Mainstream Engineering Corp.
Rockledge, FL 32955
Sep 06, 2007 Developed for HVAC trade as 3 oz aerosolized can with 4 in. long nozzle extension, QwikDectector-HE(TM) can save lives by early detection of leaks due to defects caused by corrosion, expansion/contraction cracks, or manufacturer error that exposes occupants to CO. It penetrates heat exchanger fissure as small as 24/1,000 in. after one 5 sec spray into drilled 1/8 in. furnace plenum hole. Unit pinpoints openings within heat exchanger whether or not they are leaking at time of test.

RLE Technologies
Fort Collins, CO 80524
Aug 01, 2007 Configurable with up to 12 virtual zones, SeaHawk LD5100 determines location of any conductive fluid on up to 5,000 ft of SeaHawk Leak Detection Cable to within ±2 ft. Thresholds for leak, delay, and contamination alarms are adjustable, and solution integrates with existing building/network management systems. After conductive fluid comes in contact with cable or SeaHawk zone spot detectors, system pinpoints location of leaks, annunciates alarm, and displays distance on backlit LCD.

Spectronics Corp.
Westbury, NY 11590
Apr 30, 2007 Spectroline® BigEZ(TM) contains enough fluorescent dye to treat systems containing up to 16 gal of lubricant, and features disposable dye cartridge, which is calibrated in 1/8 oz increments. Injector consists of handle/threaded shaft and collar assembly, 4 oz solvent-free AR-GLO® fluorescent leak detection dye, and hose assembly with low-loss fitting. Cartridges are available for mineral oil, polyol ester and alkyl benzene lubricants.

Cincinnati Test Systems Inc.
Village Of Cleves, OH 45002
Apr 20, 2007 Utilizing proprietary test algorithms processed on 32-bit system, Sentinel I-24 is multi-test configurable for any test requirement. It includes auto calibration, up to 5 programmable tool controls, and automatic part setup that can handle up to 99 programs. Data storage is expandable through USB port and offers part traceability. Suitable for wall mount or benchtop mounting, detector supports Ethernet, USB, and RS232 communication.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Dec 15, 2006 Using calorimetric measuring principle, Series CAM detects compressed air leaks, providing quick, accurate readout. Unit is virtually maintenance-free and available with ½, 1, or 2 in. NPT process connections, allowing users to choose size and range that best suits their needs.

Alcatel Vacuum Products, Inc.
Hingham, MA 02043
Nov 30, 2006 Composed of 3 separate 19 in. rack-compatible modules, Model ASI 20 MD is suited for integration into any leak detection system, including hard vacuum and sniffing tests. Analyzer cell with dual filaments and electron multiplier amplification system ensure sensitivity of 5.10^-11 mbar.l/s. Detector includes molecular drag pump with intermediate port and rotational speed of 27,000 rpm, as well as autocalibration system, and flat remote control panel with multiple displays.

Alcatel Vacuum Products, Inc.
Hingham, MA 02043
Nov 16, 2006 Portable, dry sniffing Model ASM 102 S is suitable for applications where unit may have to be placed sideways, at an angle, or carried around frequently. System can be used for control and maintenance of any part or installation used under pressure, including underground cables and tubes, valves and manifolds, and underground or external storage tanks. Unit is suited for testing Kerosene tanks, liquid Propane gas and oil tankers, offshore gas installations, and hydrogen gas supply lines.

Flir Systems, Inc.
North Billerica, MA 01862
Oct 23, 2006 Suited for petrochemical facilities, ThermaCAM® GasFindIR(TM) utilizes infrared imager employing sensitive detector and cold filter to observe active leaks of VOCs such benzene, propane, and methane. Real-time thermal images of gas leaks appear as black smoke onscreen. Users can capture and record images to any off-the-shelf video recorder for archiving, documenting, or emailing.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Sep 20, 2006 Battery or line powered, Series WD2 relies on electrical conductivity of water to change resistance across 2 contacts located at base of enclosure. When there is enough water to bridge contacts, alarm is triggered. Detector can be placed on flat surface under HVAC equipment, dishwashers, washing machines, refrigerators, compressors, and in electrical switchgear rooms.

MOCON
Minneapolis, MN 55428 1010
Sep 19, 2006 In one analysis, PAC CHECK® Model 840 lets packagers measure 2 critical variables - residual headspace oxygen (O2) and absolute package leak rate - that determine package shelf-life. Unit produces absolute leak number based on application of Poiseuille's law, which yields total hole diameter leak size based on measurements of pressure and flow. It saves up to 240 data points in internal memory and can also send information to computer via RS-232 data line.