Honeywell International    Freehold, NJ 07728
May 25, 2012 Experion® MX Quality Control System (QCS) is capable of making Transmission Infrared (TRIR) Fiber Weight and Moisture Measurements via sensor that simplifies overall operations in tissue production industry. Sensor provides measurement of both dry weight and moisture while decreasing sensitivity to environmental factors such as temperature and head alignment. Solution can also be retrofitted to replace older systems containing nuclear source betagauges.

Analog Devices Inc    Norwood, MA 02062
May 22, 2012 Featuring plug-and-play design, ezLINX(TM) iCoupler® Isolated Interface Development Environment enables evaluation of 8 physical layer, digitally isolated communication standards simultaneously. Designers and system architects benefit from open-source hardware and software, which is based on ADSP-BF548 Blackfin® processor core running uCLinux® kernel. On-board sample application software allows for direct monitoring of bus traffic and helps designers make box-to-bench transition.

Rohde & Schwarz Canada, Inc.    Ottawa, ON K2V1C7
May 22, 2012 Operated locally via 11 in. touchscreen or remotely via LAN using PC/tablet, R&S VTC video test center can assess functionality of digital video interfaces, such as HDMI and MHL, as well as their compliance with relevant standards. Modular, all-in-one platform provides combined real-time protocol testing and A/V media content analysis, including difference picture analysis. Accommodating up to 8 test modules, solution may also be upgraded to comply with new standards.

Anritsu Co.    Richardson, TX 75081
May 18, 2012 Configured with tracking generator, Spectrum Master(TM) MS2711E, MS2712E, and MS2713E are designed with CW generator and respectively cover frequency ranges of 500 kHz to 3, 4, and 6 GHz to aid field technicians with network deployment, installation, and maintenance. Power accuracy procedure removes inaccuracies caused by temperature variations, while touchscreen-enabled UI simplifies measurement process. Also, dedicated routines are included for various one-button measurements.

E Instruments International LLC    Langhorne, PA 19047
May 16, 2012 Supplied in 5 x 2.5 x 1.25 in., shockproof housing, VT100 measures air velocity from 0-6,000 fpm and temperature from -4 to +176°F. Along with 0.01 resolution, features include adjustable shutoff, m/sec or fpm unit selection, as well as Max, Min, and Hold functions. Ice Blue 128 x 128 pixel display can be read in light or dark environments. Handheld unit, suited for laboratories, clean rooms, air balancing, and more, comes with one 9 V battery and optional cones for air flow.

Bindicator    Spartanburg, SC 29306
May 15, 2012 Providing electronic vibratory level control, LP1000/LP2000 Pulse Point Tuning Fork is effective in lightweight powders and granular solids. Measuring device features vibration-resistant surface mount components and universal power supply that includes 24 Vdc. With FM and ATEX agency approvals, unit is dust ignition proof and explosionproof.

Kontron    Poway, CA 92064
May 11, 2012 Suitable for all COM Express Type 10-compliant mini Computer-on-Modules, Kontron COMe Starterkit Ref. Carrier T10 facilitates evaluation and development of small form factor and mobile applications, even for extended temperature range of -40 to +85°C. Kit includes industrial-grade Carrier Board Kontron COM Express Reference Carrier-i Type10, 7 in. WVGA touchscreen with backlight cable, 12 V/5 A power supply, and cables to connect LVDS display, touch sub system, CAN bus, and SATA drives.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 11, 2012 With pulse down to 10 µsec, B1505A Power Device Analyzer/Curve Tracer measures device characteristics from sub-pA up to 10 kV/1,500 A. Standard test fixture (N1265A) enables safe packaged-device testing, secure on-wafer testing over 200 A, and oscilloscope view for real-time verification of I/V waveforms on multiple device terminals. Preconfigured version, B1505AP, includes all modules, cables, and accessories necessary for accelerated startup.

Detroit Precision Hommel    Rochester Hills, MI 48309
May 10, 2012 With up to 7 CNC axes, Jenoptik Wavemove measures and evaluates complex shaft or prismatic parts. Workpieces are positioned in tilt fixture mounted on rotary table on granite base. With traverse length of 120 or 200 mm, system performs roughness and contour measurement using intelligent arrangement of probing systems. Detailed, exportable analyses of measuring results provide exact statements about quality of production process, based on many parameters from automotive industry.

Edmund Optics    Barrington, NJ 08007
May 08, 2012 Suited for use in low light level applications, CCD Based Fluorescence Spectrometer uses TE-cooled, 2,048-pixel, linear CCD array to provide extended operation stability and optimized SNR. Cylindrical lens and 100 mm wide slit are used to collect and focus maximum amount of light possible onto 200 mm pixel. Broadband spectral response range provided by this instrument allows detection of wavelength bands characteristic of fluorescence applications.

Mahr Federal Inc.    Providence, RI 02905
May 03, 2012 Suited for measuring thin-walled work pieces, Precimar PLM 600-2 offers fully automated deformation correction function as part of application tool set in system's controller. Procedure automatically modifies measuring force in specified sequence while recording corresponding change in part's measured size. This lets system determine actual elastic properties of part, which are then used to calculate given length in unloaded, measured force-free state of part.

National Instruments Corp.    Austin, TX 78759-3504
May 03, 2012 Featuring unlimited mechanical lifetime, NI PXI/PXIe-2543 switch module gives RF test engineers solution with which to optimize routing of RF signals up to 6.6 GHz. Solid-state architecture provides long life and integrated PXI triggering provides fast and repeatable measurements. Suited for multisite test, this 6.6 GHz dual 4x1 multiplexer, intended for high-density RF switching, features 50 ohm termination on all channels.

Ahram Biosystems, Inc.    Seoul 133-120  Korea (south)
May 01, 2012 For downstream applications requiring nucleic acid amplification, portable Palm PCR(TM) F1-12 provides 3 standard fast speed levels and delivers 30-cycle PCR amplification within 24-30 min. Amplification sensitivity reaches to near single-copy level below 10 copies, and dynamic range of PCR amplification is up to 1 kbp. Measuring 2.8 x 4.76 x 1.85 in. and weighing 350 g, instrument can operate continuously for 4+ hr on one battery charge and offers temperature uniformity of less than ±0.1°C.

AEMC Instruments    Foxborough, MA 02035
Apr 30, 2012 Operating from 75-1,000 Vac, Model 6610 has 45-65 Hz frequency range and 3 attached color-coded test leads with non-metallic alligator sensor clips that provide connection to DUT. Device does not have any direct electrical contact (no metal contact points) and offers phase rotation LED indicators (ABC or BAC). LED indication is available for live or open phase (A, B, C), and back cover includes magnet feature that can mount instrument to any metal cabinet panel.

Mocon    Minneapolis, MN 55428
Apr 23, 2012 As combination testing system for packages with one-way degassing valves, MultiCheck® 425 measures headspace carbon dioxide (CO2) and oxygen (O2). System also performs pressure decay leak test, seal strength burst test, and one-way degassing valve performance test via Valve Test Unit(TM) (VTU). By combining 5 tests in one unit, product conserves time, labor, and samples needed to conduct individual testing; single package cycles through all tests on one unit.

INSTRON    Grove City, PA 16127
Apr 17, 2012 Incorporated as standard item on single column electromechanical frames, BioBox allows for full travel tests of sutures, catheter tubing, and latex gloves. System is ergonomically designed with dual door panel and high-level air ducts for consistent air flow and uniform temperature distribution during testing. BioBox is suited for testing devices or materials that elongate beyond testing space allowed by heated bath or that cannot be submerged in liquid.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Apr 13, 2012 For manufacturers and design houses, N4010A wireless connectivity test set with Bluetooth low-energy Tx/Rx option acelerates product development and time to volume production. Single-box test set, designed for Bluetooth, WLAN a/b/g/n, and Zigbee, covers product lifecycle from development and integration through to production. Option 109 supports non-signaling Bluetooth low-energy Tx/Rx testing in external PC-hosted software for single- and dual-mode Bluetooth low-energy applications.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Apr 12, 2012 Equipped with USB interface and software, CG204 uses magnetic induction for ferrous substrates and eddy current measurement for non-ferrous substrates. Available measuring modes include Single and Continuous, while working modes include Direct and Group. Able to store 80 Direct and 320 Group readings in memory, tester provides Min/Max/Average functions, single- or 2-point calibration, and user-programmable high/low alarms. Menu system facilitates operation.

McPherson, Inc.    Chelmsford, MA 01824
Apr 12, 2012 With extended lamp life at short UV wavelengths, VUVAS scientific-grade spectrophotometer is suited to analysis of doped and crystalline materials as well as deep UV optics and coatings. Unit offers direct optical characterization of transmission, variable angle reflectance, and gas cell absorbance (optional). Wavelength control is precise and reproducible throughout 120-350 nm range, and sensitive signal recovery is available with lock-in detectors controlled from software.

Valco Instrument Co., Inc.    Houston, TX 77255
Apr 06, 2012 Available in 4-, 6-, 8-, and 10-port configurations in stainless or PEEK, Cheminert® C55 Series uses Cheminert HPLC injector design and 24 V motor. Control requires single momentary contact closure, which steps valve to next position, and separate contact closure moves valve to position 1 (Home). Optional serial interface board permits RS232 communications for position input control and confirmation of valve position.