DSP Cards

Test & Measuring Instruments, Computer Hardware & Peripherals

Multicore DSPs support high definition audio standards.

May 27, 2008

Supporting DTS-HD Master Audio(TM) and High Resolution Audio(TM), Symphony(TM) multicore DSP56720 and DSP56721 DSPs have two 24-bit DSP56300 cores with 48-bit double precision capability to handle advanced post processing and decoding on same chip. With 248 K x 24-bit words of integrated memory and plug-and-play software architecture, DSPs integrate S/PDIF transceiver and 10-channel asynchronous sample rate converter. Model DSP56720 also features external memory controller. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Communication Systems & Equipment

DPCSS upgrades SAW-based radars.

January 23, 2008

Model CI BM7xx digital pulse compression sub-system (DPCSS) comes with chirp generator (transmitter) and compressor (receiver) modules at intermediate frequency (IF). Combining FPGAs for signal processing and analog I/O for IF of SAW, signal processor is self-consistent, and needs only dc supply voltage for operation. All pulse compression parameters such as center frequency, bandwidth, time dispersion, modulation law, and weighting function are programmable. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Communication Systems & Equipment

Reference Platform optimizes PHS base station processing.

January 11, 2008

Reference platform for next-generation Personal Handy-phone System (PHS) base station equipment consists of MPC8548 PowerQUICC(TM) communications processor and programmable multi-core MSC8144 DSP. Solution provides flexible baseband processing for control and physical layers. Based on StarCore® DSP technology, MSC8144 DSP embeds 4 multiple-issue 1 GHz StarCore® DSP cores and integrates 10.5 MB DSP memory, security coprocessor, RISC engines, and high-speed networking interfaces. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Controls & Controllers

Real-Time Signal Controllers feature 768 Kb flash capacity.

December 6, 2007

With ability to control up to 4 individual motors simultaneously, XE166 family integrates MCU that combines 16-bit C166 core for peripheral control with computing power of DSP. Operating at 80 MHz and one cycle per instruction, units deliver 80 MIPS. Controllers include embedded voltage regulator, various clock sources, brown-out detection, watchdog as well as 2 synchronizable A/D converters with 24-channels, 10-bit resolution, and conversion time of less than 1.2 µsec. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Evaluation Board helps develop audio and video applications.

December 18, 2006

SurfRider/AMC-EVM(TM) enables user to design, debug, and experiment with TI's digital signal processors (DSPs)and network interfaces from desktop, utilizing same resource board for all stages in developmenet cycle. Product includes SurfRider/AMC, fully integrated RoHS-compliant AMC DSP resource board along with SurfDocker(TM) modular plug-in, and 2 TI TMS320C6412 DSPs. SurfRider/AMC supports PICMG® SFP I-TDM protocol over Gigabit Ethernet for transporting audio, video, fax, and modem traffic. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Electronic Components & Devices

Receive Signal Chain Demo Kit simplifies ultrasound designs.

September 19, 2006

Providing 8-channel analog receive signal chain, Model TUS5000 evaluation module is designed to interface four 2-channel VCA2615 variable gain amplifiers with 8-channel ADS5272 serialized LVDS-output analog-to-digital converter (ADC) for rapid prototyping in beam-forming applications. Integrated ADC and amplifier offer noise performance at 71.1 dBFS signal-to-noise ratio and 0.7 nV/rtHz respectively, while CDCM7005 clock synchronizer and jitter cleaner provides 65 MHz clock to ADC. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Mechanical Components & Assemblies, Communication Systems & Equipment

Spectrometer IP Core suits radio astronomy applications.

May 13, 2005

Spectrometer IP core for FPGA enables development of wideband spectral analysis systems. Based on HyperSpeed Fast Fourier Transform (FFT) technology, core takes 1 GHz sampled signal at its input and converts it to frequency power spectrum using digital band filter and 16K-point FFT in continuous real-time. This process enables 400 MHz bandwidth of radio spectrum with passband ripple of 0.001 dB to be analyzed with frequency resolution of 30.5 kHz. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Mechanical Components & Assemblies

VoIP Solutions facilitate voice-enabled product development.

November 18, 2004

Z.Voice(TM) solutions provide time-efficient way to voice-enable products, and include licensable ZSP® processor cores, DSP products, industry-compliant vocoders, bundled silicone/software packages, and reference designs. Products enable multi-channel VoIP solutions that support range of 2-32 channels of VoIP. Z.Voice-729 Bundle provides take-to-market G.729, G.729A/B, multi-channel VoIP solution, including DSP processors and software. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Electronic Components & Devices

FFT Cores optimize silicon efficiency.

October 22, 2004

Fast Fourier Transform (FFT) cores use fixed-point arithmetic and have been developed using parallel mixed-radix architecture. Products, offered in HyperSpeed FFT and HyperLength FFT designs, provide silicon efficient implementations of FFT algorithm for spectral analysis. They support sample rates to 3.2 GHz and transform lengths up to 256 M-points running in continuous real-time, depending on model. All units are factory configured to user specifications. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Digital Signal Processor suits math-intensive applications.

September 23, 2004

APE2 adaptive-datapath DSP core allows development of data engines for ASICs in wireless, audio, and control applications. VLIW architecture has parallel structure with processing modules such as single-cycle MACs and ALUs connected to common data routing bus. Ready-to-use circuit configurations include: sin/cos/tan/arcsin/arccos and arctan calculation; vector magnitude; ratios and reciprocals; coordinate transforms; and square root, exponents and logarithms. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Digital Signal Controllers offer 150 MIPS DSP performance.

July 2, 2004

Models TMS320R2811 and R2812 contain 20 K words of on-chip SRAM, allowing developers to add unlimited amount of external memory to design via SPI port. They integrate multi-channel, 12-bit ADC to measure system parameters and responses. Additional control and communication peripherals include SCI, SPI and McBSP, PWM, QEP, CAP, and timers as well as CAN 2.0B interface. Units are suited for industrial, automotive, sensing, flow metering, and e-metering applications. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Digital Signal Processor withstands washdowns.

September 18, 2002

Goring Kerr DSP IP has been certified to meet IP69K requirements of 1450 psi washdown at 176 °F. It has internal power supply that saves space on the production line and reduces costs on hardware and wiring, and is available with Goring Kerr Auditcheck Automatic Performance Verification System. Read More

  • 1