New Arduino SIM Connectivity Service Povides Full Integration with Arduino Cloud
Allows developers and manufacturers with cellular access to IoT cloud platform. Provides IoT accessibility to every user from makers to professionals across domains in education, agriculture, industrial, and retail. Enables user to send sensor data to databases, spreadsheets or alerts without using webhooks.
Read More »
New DesignCore Sensor Interface Card with On-Board FPGA
Allows user to quickly connect multiple cameras or sensors with NVIDIA Jetson AGX Xavier Developer Kit . Enables engineers to connect up to 16 streams of input data for computing power of Jetson AGX Xavier. Offered with high-speed SerDes input using FPD-Link™ III interface and power-over-coax.
Read More »
Acromag's New ACPS3310 3U cPCI Serial Mezzanine Module Carrier Card Interfaces Two Ruggedized mPCIe Analog I/O, Digital I/O and Serial Communication
68-pin front panel connectors securely route field I/O signals to AcroPack I/O modules eliminating loose internal cabling. AcroPack modules are available for A/D, D/A, discrete level monitoring/control, counter/timer, RS232/422/485, GbE, CAN bus, avionics and FPGA computing tasks. Ideal for defense, aerospace, transportation, oil/gas, scientific, test/measurement and manufacturing applications.
Read More »
New VPX GR2 and GR4 Video and Graphics Cards Support CUDA and OpenCL
The 3U VPX GR2 and GR4 Video and Graphics Cards from Abaco are embedded with NVIDIA® Pascal™ GPUs that deliver up to 6.4 TeraFLOPS of performance. The GR2 board features a full video capture and output and is suitable for applications such as ISR, C4ISR and remote sensing/analysis. The GR4 comes with four 3G-SDI video inputs/outputs and one DisplayPort™ output that provides support for 4K...
Read More »
Ergonomics Is Good Economics
While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.
Read More »
QNAP Introduces Mustang-200 Computing Accelerator Card with 10GbE Network Connectivity
The Mustang-200 Computing Accelerator Card comes with a dual CPU with Intel Graphics. The product is powered by intuitive and intelligent mQTS operating system and enables user to install various applications through built-in App Center. The Mustang-200 card is available in Mustang-200-i7-1T/32G-R10, Mustang-200-i5-1T/32G-R10 and Mustang-200-C-8G-R10 models with Intel Core i7-7567U, i5-7267U and...
Read More »
Latest PMC-429HD ARINC-429 Interface Card is Offered with ARINC Protocol Engine
The PMC-429HD ARINC-429 Interface Card features channels with shared, programmable receive and transmit functions. The unit is suitable for PCI Express, VPX, VME, Single Board Computers (SBC), CompactPCI (or Express) PXI (or Express) systems. The device allows user to configure the options ranging from 16, 32 or 48 RX or TX shared ARINC-429 channels to four ARINC-717 channels. It enables user to...
Read More »
Xilinx Introduces Alveo U280 HBM2 Accelerator Card with High-Bandwidth Memory
The Alveo U280 HBM2 Accelerator Card provides eight gigabytes of HBM2 at 460 Gbps speed. The product is designed for memory-bound, compute intensive applications such as database analytics, machine learning interference. The U280 card features PCI Express 4.0 with CCIX support for leveraging server interconnect infrastructure for high-bandwidth, low latency, cache coherent shared memory with CCIX...
Read More »
New G211X Ethernet Interface Card Supports Data Transmission Rates of 1 Gbit/s Per Interface
The G211X Ethernet Interface Card features four 10/100/1000BASE-T Ethernet channels on the front panel. The interfaces are controlled via Ethernet controller connected to backplane. The product can be operated in -40°C to +85°C temperature and has an insulation voltage of 500 V. The device comes with Intel i82580 Server chipset with support for 8 virtual machines. It is designed for use in...
Read More »
New Matrox Concord PoE Adaptor Card Features Trigger-over-Ethernet Capabilities
The Matrox Concord PoE Adaptor Card comes with eight auxiliary I/Os that synchronize multiple GigE Vision devices. The product is offered with either two or four Gigabit Ethernet ports. The ToE capability allows user to send a software trigger or an action-command to multiple cameras based on external input event. The unit is equipped with multiple cascadable hardware timers for counting or...
Read More »
New NVP2000x XMC Graphics/GPGPU Cards Come with H.265/H.264 Hardware Encode/Decode Capability
The NVP2000x XMC Graphics/GPGPU Cards are based on NVIDIA® Quadro® P2000 graphics and are designed for use in harsh environments. The units feature rear XMC I/O connector Pn6 that offer customizable DisplayPort++ video outputs. They can be customized to support DVI, SDI, Composite, STANAG 3350, RS-170, RS-343, and VGA outputs. The cards can be configured to power ratings in 25 to 50 W...
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
