Robotrol Corporation
San Martin, CA 95046
Apr 21, 2003 Model RPC616 contains 16 digital-to-analog outputs, and 24 digital I/O with number of programmable modes. Analog outputs have 12-bit resolution and may be set to 7 voltage ranges including 2.5V, 5V, 10V, ±5V, ±10V, -5 to 0V, and -10 to 0V. Digital I/O can be individually programmed to be either inputs or outputs. Data transfer width, interrupt enable, max D/A channel number, mixed voltage and current loop modes, and digital I/O direction are programmable.

Robotrol Corporation
San Martin, CA 95046
Apr 16, 2003 With 500 kHz max A/D throughput rate, RPC632 contains 32 analog-to-digital inputs and 20 programmable digital I/O. Analog inputs have 12-bit resolution and may operate as 32 single-ended inputs or 16 differential inputs, with each input protected to ±32 V. Programmable features include 8- or 16-bit data transfer width and 4 µsec–64 msec conversion intervals. With auto increment and continuous conversion modes, unit offers interrupt, polled status, and external trigger capabilities.

Robotrol Corporation
San Martin, CA 95046
Apr 03, 2003 Model RPC628 contains 16 analog-to-digital inputs, 8 digital-to-analog outputs, and 16 digital I/O with programmable modes. Analog inputs have 12-bit resolution and may operate as 16 single-ended inputs or 8 differential inputs, with each input protected to ±32 V. The 8 analog outputs have 12-bit resolution and 7 voltage ranges. Conversion intervals may be programmed from 4 µsec to 64 msec. Unit includes interrupt, polled status, and external trigger capabilities.

Data Device Corp. (DDC)
Bohemia, NY 11716-2482
Apr 02, 2003 Model BU-65580 Enhanced Bit Rate (EBR) 1553 PC/104 card, built with Enhanced Mini-ACE® 1553 core, is compliant with SAE Miniature Munitions/Store Interface or MMSI standard. Product provides one channel of EBR-1553 that can be programmed for BC, RT, or RT/MT modes of operation. Unit is compatible with earlier generation ACE and Mini-ACE (Plus) series software libraries as well as company's dataMARS/dataSIMS software.

Parvus Corp.
Salt Lake City, UT 84115 2913
Mar 17, 2003 Providing non-blocking switching performance, 10/100 Ethernet Switching Hub provides method for networking up to five embedded computing devices with 10BaseT or 100BaseTX Ethernet connections. Measuring 3.550 x 3.775 in., device is available in 2 configurations for PC/104-based systems and 2 models that work with embedded computer environments. PC/104 models include 104-pin/socket header, while other 2 models include 2-pin Molex connector.

WinSystems, Inc.
Arlington, TX 76011
Mar 04, 2003 Model PCM-COM8 8-channel, serial asynchronous communications module provides each transmit and receive channel with 128-byte deep FIFO. All 8 channels support RS-232, RS-485, and RS-422 electrical levels to interface to serial communications devices. Two XR16C854 devices serve as serial communication controllers and contain on-chip, software programmable baud rate generators with data rates selectable through 115,200 bits/sec.

Tri-M Systems Inc.
Coquitlam, BC V3K6X7  Canada
Nov 30, 2001 DEV104+ development board for PC/104 and PC104+ modules is suitable for prototyping and embedded applications. It has 16-bit PC/104 Expansion bus, 32-bit PC/104+ Expansion bus, two 16-bit ISA Expansion bus slots, and two single device 32-bit PCI Expansion bus slots. Board can be powered with ATX or AT supply, and six LED lights indicate power supply output status. All pin-out descriptions are silk screened on board.

UEI
Watertown, MA 02472
Nov 19, 2001 PD2-AO-32/16HC high-current board supplies 90 mA per channel continuously, while 16HV high-voltage version generates ±40 V on each of its output lines. Current board maximum aggregate output current is 1.725 A at 10 V or 1.625 A at -10 V. Adequate cooling is needed if the board sinks more than 1.25 A total, but simply adding fan in chassis is generally sufficient. Both piggyback modules take their power from PC's main power supply, not PCI bus.