Power Interface Boards support VITA 62 power supplies.
Electronic Boards

Power Interface Boards support VITA 62 power supplies.

Available in 3U and 6U heights in either single or dual PSU formats, Pixus VITA 62 Power Interface Boards feature header for voltage sense and IPMB for VITA 46.11 system management or other IPMI-based options. Units have several power bugs for 3.3, 5, and 12 V power as well as 26-pin header that accommodates general purpose I/O signals from PSUs. To optimize chassis cooling, breakaway tabs at...

Read More »
COM Express Module supports data-centric applications.
Single Board Computers (SBC)

COM Express Module supports data-centric applications.

Measuring 125 x 95 mm,Â- Model PCOM-B634VG utilizes Intel® Xeon® Processor D-1500 Family, which integrates up to 8 CPU cores, each with three 1.5 MB cache, of up to 12 MB in total. Module provides one PCIe x16 and eight PCIe x1 channels, one standard GbE interface plus two 1/2.5/10 GbE Intel® Ethernet interfaces in C/D pin row. Three SODIMM memory slots support dual-channel...

Read More »
Development Board supports IoT applications.
Miscellaneous Controllers

Development Board supports IoT applications.

With MAX32600MBED, mbed engineers and IoT developers can quickly design embedded systems based on MAX32600 microcontroller. Board includes MAX32600 ARM Cortex®-M3 based microcontroller, prototyping area with adjacent access to precision analog front end connections, I/O access through Arduino®-compatible connectors, additional I/O access through 100 x 100 mil headers, USB interface,...

Read More »
Miscellaneous Boards

Development Kit supports IoT gateways and edge devices.

Based on IAP140 quad-core ARM Cortex A53 application processor, Andromeda Box™ Edge is designed for rapid prototyping and development of smart devices. Andromeda Box™ Connect, featuring ARMADA® 385 dual-core ARM Cortex A9 application processor, enables development of IoT gateway solutions. Systems integrate Brillo, Google's OS based on Android, and natively support Weave protocol,...

Read More »
Curtiss-Wright and Harris Government Communications Systems Collaborate to Bring Pre-Validated Digital Moving Map Solution to Rugged COTS Systems
Electronic Boards

Curtiss-Wright and Harris Government Communications Systems Collaborate to Bring Pre-Validated Digital Moving Map Solution to Rugged COTS Systems

Harris FliteScene Digital Moving Map Software/Board-sets are Pre-Validated for Embedded Avionics Applications ASHBURN, Va.– Curtiss-Wright Corporation today announced that its Defense Solutions division, in collaboration with Harris Government Communications Systems, has introduced the new FliteScene® Digital Mapping Solution, its latest pre-validated, pre-tested System Ready Application...

Read More »
Electronic Boards

VCA Developer's Kit jump-starts prototype builds.

WithÂ- VCA Developer’s Kit, users can start building voice coil actuator prototypes. Each kit includes VCA with built-in feedback sensor and programmable controller with MotionLab Software that runs on user's local PC. Incorporating I/O board that allows physical inputs and outputs, controller can operate in open or closed loop modes, is internally compensated for high...

Read More »
FPGA Mezzanine Cards are available for 3U VPX, PCI form factors.
Miscellaneous Boards

FPGA Mezzanine Cards are available for 3U VPX, PCI form factors.

FlexorSet™ Model 5973-324 (for 3U VPX) and 7070-324 (for PCIe) consist of Flexor Model 3324 four-channel A/D and four-channel D/A FMC installed on either of 2 carriers. Carriers contain optimized Pentek FPGA IP for A/D acquisition and D/A waveform playback (ideally matched to four 500 MHz, 16-bit A/Ds and four 1.5 GHz, 16-bit D/As with DUCs on FMC). Software development tools enable accelerated...

Read More »
Signal Conditioners

Concurrent Presents New Simulation Solutions at the 2015 Automotive Testing Expo

ATLANTA - Concurrent (NASDAQ: CCUR), a global provider of high-performance Linux® and storage solutions, today announced it will showcase its automotive simulation and testing solutions at the 2015 Automotive Testing Expo in Detroit, MI, October 20(th)-22(nd).Â-  The company will also present a session entitled Rapid Prototyping and Hardware-in-the-Loop Test System Architectures,"...

Read More »
Miscellaneous Boards

FTDI Chip Unveils New Hardware to Support Its High Performance Microcontroller Offering

Addressing development, programming & debugging activities FTDI Chip has introduced a series of easy-to-utilize modules to facilitate the evaluation, development and subsequent implementation of its 32-bit FT90X Super-Bridge MCUs. This will mean that engineers in the embedded space are better positioned to benefit from the industry-leading performance levels and extensive connectivity that these...

Read More »
Michelman Spotlighting Mold Release Solutions for Composite Wood Panel Manufacturers at 2015 EWTA Info Fair
Miscellaneous Boards

Michelman Spotlighting Mold Release Solutions for Composite Wood Panel Manufacturers at 2015 EWTA Info Fair

CINCINNATI, OH - Michelman will feature a selection of its popular composite wood panel mold release agents, as well as a modular duplex blending and application system at the 2015 EWTA Info Fair Supplier Exhibition. Michelman will be exhibiting in Booth #8 at the event which is being held October 17-19, 2015, in Coeur d’Alene, Idaho. Michelman’s Michem® Wood Release brand mold release...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics