LDPI Lighting    Eau Claire, WI 54703
Sep 16, 2008 Permanent fixtures for hazardous locations, available in 4 and 8 ft lengths, are constructed from cold-rolled steel one-piece housing and finished with specular polished reflector. Lens design creates optimal lamp image definition using light and dark contrasts. Mounted vertically or horizontally, 4 ft 2-fixture and 3-fixture inspection light carts provide portable lighting. Attachment via swivel mounting brackets enables precise aiming of light.

Calex Mfg. Co., Inc.    Concord, CA 94520
Sep 16, 2008 Designed for complete signal isolation, 8900 Series includes 16 dc powered signal conditioners to offer 8 inputs, including 0-50 and 0-100 mV, 0-5, 0-10, and 0-100 V, and 4-20, 0-20, and 0-50 mA, which can be combined with choice of 2 outputs. It employs 3-way signal isolation topology, where input is isolated from output and both are isolated from supply voltage. UL 508/1604 compliant series comes in 4.3 x 0.89 x 2.9 in. plastic case with built in DIN Rail mounting foot.

United Air Specialists Inc.    Cincinnati, OH 45242 2832
Sep 16, 2008 Able to show positive, negative, and differential measurement, Digital Pressure Control (DPC) gauge is designed for on-demand cleaning, while Digital Pressure Monitor (DPM) gauge is used only for continuous pulse cleaning. ETL and CE approved units feature compact enclosure, digital LED pressure readouts from 0-8 in. WC, multi-colored LED arc readout, 4 functional programming buttons, NEMA 4-rated pulse control panel, and U.L. recognized pulse timer board.

WIKA Instrument Corporation    Lawrenceville, GA 30043
Sep 16, 2008 Designed to measure pressure ranges from 1-25 in. wc, air2guide differential pressure gauge includes 2-part measuring system that separates media from case components. Standardized case designs allow mechanical and electronic output configurations to use identical components and permit replacement of only measuring system. Unit can be retrofitted to existing hole-patterns, and comes with complete line of accessories, mounting options, custom dials, and configurations.

MadgeTech    Warner, NH 03278
Sep 16, 2008 Featuring front panel keypad, Model RTDTemp2000 has user-selectable measurement units and programmable start and stop time. It features LCD display that provides convenient access to minimum, maximum, and average temperature statistics, as well as displays battery level, external power status, sampling, and recording status. Available in rugged, anodized aluminum enclosure which can be wall mounted, unit comes standard with 9 V replaceable battery with up to a 1 yr battery life.

Timken Co., The    Canton, OH 44706 0932
Sep 16, 2008 Measuring 0.68 in. long with 1.6 in. dia and 1.28 or 1.81 in. mounting patterns, M15 Modular Magnetic Encoder performs in dirty environments where debris interference is high. Available in resolutions ranging from 100-2,048 lines with 4/6/8/12 pole commutation and reference pulse options, it is based on MPS 160 encoder ASIC, which combines direction-sensing Hall Effect encoder and integrated index pulse with high-resolution multiplying circuit to produce quadrature output signals.

Sartorius AG      Germany
Sep 16, 2008 Designed for online analysis, PMD300 can automate moisture content data taken at multiple readings per second via microwave resonance technology to provide users with complete overview of current production process state. Immediate feedback can be realized via manual process control as well, and both means can send results to PC, switch cabinet, or PLC. Core and surface moisture content are analyzed, and measurable moisture content ranges from 0.1-60% depending on sensor type.

DeFelsko Corp.    Ogdensburg, NY 13669
Sep 16, 2008 PosiTector 6000 facilitates compliance with International Maritime Organization Performance Standard for Protective Coatings (IMO PSPC) regulation for seawater ballast tanks in all types of ships and double-side skin spaces on bulk carriers. After target thickness value is entered, product indicates PASS/FAIL condition for each measurement taken. PosiSoft software and USB cable are included for downloading reports with thickness criteria, readings, and PASS/FAIL statements.

EMCO Flow Systems    Longmont, CO 80501
Sep 15, 2008 Featuring non-invasive, clamp-on design, Sono-Trak(TM) includes SS quick clamps and heavy-duty, urethane-coated cables. Using NEMA 6-rated transducers, Sono-Trak measures liquids for pipe sizes from 2-100 in. with accuracy of ±0.5% of rate and repeatability ±0.1% of rate. Meter can process temperatures from 40-400°F and measurable flow velocities for liquids from -40 to 40 ft/sec. Plug-and-play I/O modules enable custom electronics configuration and/or field upgrades.

Wilkerson Instrument Co., Inc.    Lakeland, FL 33811
Sep 15, 2008 Acting as standard DAQ device or repeater, DR9051R wireless transmitter provides analog and contact closure data to DR9050 controller. Latter acts as portal between Modbus Master Controller and from 1-247 remote transmitters. It outputs standard Modbus RTU data via RS485/422 data port and can be wired in parallel with other Modbus products. Combined DR9050/DR9051R system offers choice of 3 radio frequencies, 2 in 915 MHz ISM band and one in 2.4 GHz band, that use SSFH technology.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Sep 15, 2008 SDALTEVK and SDXILEVK triple-rate SDI and video clocking daughter card development kits include FPGA IP for audio embedding and test pattern generation and framing for SD, HD, and 3 Gbps type-A SDI formats. They support 270 Mbps, 1.485 and 2.97 Gbps data rates. SDALTEVK plugs directly into Altera's Cyclone III development board via high-speed mezzanine connector, while SDXILEVK plugs into Xilinx Spartan-3A development board via Avnet's EXP expansion module.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Sep 15, 2008 With TSW3070 development kit, designers can evaluate signal chain performance for test and measurement, industrial, and communications applications - including arbitrary waveform and signal generators. It facilitates interfacing high-speed DACs and amplifiers and includes clocking and power management devices to aid design and reduce cycle time. Kit includes dual-channel, 1 GSPS DAC; 2 amplifiers; complete on-board clocking solution; and power supply circuitry.

Linear Technology Corp.    Milpitas, CA 95035
Sep 15, 2008 Supplied in 4 x 3 mm DFN and MSOP packages, 1-channel LTC2301 and two-channel LTC2305 are 12-bit ADCs that communicate via I²C-compatible, 2-wire interface and dissipate 1.5 mW at 1 ksps output rate. LTC2301 measures single differential input, while LTC2305 digitizes 2 single-ended inputs. Both operate from 5 V supply and include 2 address select pins that can be tied low, high, or left floating. Internal reference and low-power shutdown mode reduce power dissipation to 35 µW.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Sep 12, 2008 Complementing CorrTran® MV online corrosion monitoring transmitter, Division 2/Zone 2 CorrTran® Corrosion Data Logging System allows users to access real-time corrosion data via Ethernet, USB, SD card, or locally via videographic chart recorder. System includes KFD2-HLC-EX1.D HART loop converter, which receives HART data from CorrTran MV corrosion monitor and delivers three 4-20 mA outputs that represent general corrosion, localized corrosion, and conductance.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Sep 12, 2008 With 3-phase line voltage applied, Model BFA flashes normal LED green light for positive indication of good fuse and integrity of wire connection to each side of fuse. Indicator flashes red fault LED when fuse is unconnected or open, if there is lost connection to either side of fuse, and if mismatched line/load wires are present. When phase loss occurs, both fault and normal LEDs will extinguish. Mounted externally to panel, product can be used for all UL Fuses Class H/J/K/R/RK.

Gamma Scientific    San Diego, CA 92123 1876
Sep 12, 2008 Designed for cockpit display backlights where lighting changes from tungsten and fluorescent to solid-state LEDs, RS-5NVIS Digital Light Source tests and calibrates ANVIS radiometers and spectroradiometers. It features light level setting to 1 part in 65,535 in absolute, NIST-traceable, ANVIS radiance and luminance units, as well as linearity deviation of less than 0.25% rms. Unit is equipped with manual control and ASCII computer interface control via built-in RS-232 port.

Rudolph Technologies, Inc.    Flanders, NJ 07836
Sep 12, 2008 Suitable for any production environment, E30(TM) and B30(TM) modules are suited for inspection and in-line monitoring of 32 nm manufacturing processes from front end of line (FEOL) through final manufacturing. Edge defects as small as 2 µm on patterned, production wafers can be detected. Part of all-surface Explorer(TM) Inspection Cluster, modules can also be used with NSX(TM) Series inspection systems commonly used in outgoing quality assurance and back-end fab applications.

GAO Tek Inc.    Toronto M1B2K4  Canada
Sep 12, 2008 Supporting various configurable test fixtures, Model GAO2782 can measure frequency ranges of 75 kHz to 30 MHz with resolution of 100 Hz. With 5 mV to 2 V signal level range, it has 0.01 W to 10 MW impedance measurement range, 0.1 pF to 100 µF range for capacitance, and 0.1 nH to 100 mH for inductance. Other measurable parameters include dissipation factor, quality factor, conductance, reactance, susceptance, and phase angle.

Aries Electronics, Inc.    Bristol, PA 19007-6810
Sep 12, 2008 RF test sockets, for use with PCBs, and CSP/BGA test and burn-in sockets, for use with burn-in-boards (BIB), feature solderless, gold over nickel-plated pressure mount compression spring probes that are mounted with 4 SS screws, which allows for height variations in device thickness. Units also include 4-point spring probe crown to insure scrub on solder ball oxides. Signal path during test is 0.977 in. and units operate from -67 to +302°F and accommodate up to 500,000 cycles.

FARO Technologies, Inc.    Lake Mary, FL 32746 6204
Sep 12, 2008 Offered in 6, 8, 10, and 12 ft lengths, Quantum FaroArm Series provides precision up to 16 microns, making it suited for inspection and reverse engineering of precision components for aerospace, automotive, and machine building. Platinum and Fusion FaroArms feature Bluetooth® wireless technology, enabling users to inspect, digitize, and transmit data up to 30 ft away, even through walls, without cables. Sleep Mode feature automatically turns off units to save energy.