Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 12, 2008 Agilent B1505A Power Device Analyzer/Curve Tracer can characterize semiconductor devices at up to 3,000 V and 20 A. Key features include accurate measurement of breakdown voltage and leakage currents at high voltage, evaluation of low on-resistance of power devices at high current, and troubleshooting for failure analysis of these devices and power electronic circuitry. Windows(TM) PC-based device includes EasyEXPERT software for operation and data management.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 12, 2008 Agilent L4532A 2-channel and L4534A 4-channel stand-alone LXI digitizers offer simultaneous sampling at up to 20 MS/sec with 16-bit resolution. Isolated input channels measure up to ±250 V and are designed to handle applications requiring electromechanical device control for product test or characterization. Digitizers include on-board measurements such as Vmin/Vmax, Vp-p, frequency, and rise/fall time that can be applied to selected portion or overall waveform.

Bosch Security Systems    Fairport, NY 14450 9199
Nov 12, 2008 Capable of monitoring up to 8 independent inputs with or without end-of-line resistance, Octo-input Interface Module includes changeover contact relay for providing potential-free output contact. Octo-relay Interface Module Low Voltage features 8 changeover contact relays for providing potential-free output contacts. When connected to Modular Fire Panel 5000 Series, modules enable T-tapping with up to 254 LSN optimized elements per loop or T-off.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
Nov 12, 2008 Equipped with cold junction compensation, 1051 PhidgetTemperatureSensor provides temperature update rate of approximately 30 Hz, ambient resolution of 0.25°C, thermocouple resolution of 0.05°C, and thermocouple accuracy of 2°C. Users can program plug-and-play device using API that is supported under Windows, Windows CE, Mac OS X, and Linux. Programs can be written in Visual Basic, VB.NET, C#, C/C++, Flash/Flex, Java, Labview, Matlab, ActionScript 3.0, and Cocoa.

Intelligent Appliance    Netanya, IL 42140
Nov 12, 2008 Offering dry contact I/O solution to any Notebook PC, model IA-2522 provides 2 change-over type output relays that can control any desired electric or electronic appliances, as well as monitor electric or electronic events. Portable device is powered through USB Port, and features 3 digital inputs that may be used both for status monitoring and event counting.

Atlona Technologies    San Jose, CA 95131
Nov 12, 2008 Accepting HD video at resolutions up to 1,080 p over HDMI 1.2a connection, AT-HD19SS extends that signal over single CAT5/5e/6 cable to up to 200 ft. It distributes HD signal from single HDMI source to up to 9 remote locations. Fully HDCP compliant units can be cascaded, adding additional 9 outputs for each unit added. Product suits in-store video displays, digital signage, as well as education and worship facility applications.

Konica Minolta Sensing Americas, Inc.    Ramsey, NJ 07446
Nov 12, 2008 Capable of measuring luminance levels as low as 0.0005 cd/m², Model CS-2000A enables contrast measurements of 1,000,000:1. Product provides accurate measurement results essential for developing and manufacturing various light-emitting devices and flat-screen TVs such as LCDs, plasma displays, organic EL displays, and LEDs. Unit also provides results for HD displays, responding to demand for gradation with near-life texture.

Ophir-Spiricon Inc.    Logan, UT 84321
Nov 12, 2008 Designed for material processing applications such as drilling, ablating, and marking, YAG Focal Spot Analyzer attenuates 1,064 nm YAG power lasers with short, compact path lengths of 50-200 mm, and supports powers levels from less than 1 to 400 W. With adjustable attenuation up to 1 x 10-10, system measures focal spot characteristics, as well as how focal distance shifts with power. Modular C-mount unit can be added to any CCD camera.

Alcatel Vacuum Products, Inc.    Hingham, MA 02043
Nov 11, 2008 Able to locate large/small leaks in large systems, 46 lb ASM 310 has footprint under 140 in.² and can be moved while in operation due to low-rotational speed hybrid turbo pump. Base pressure at analyzer cell, which ensures minimal helium background, and yttrium coated iridium filament technology minimize maintenance. Along with 5E-12 Atm.ccsec sensitivity and helium stability, password-protected unit offers bluetooth and recording graph capabilities and color TFT touch panel display.

Gradient Lens Corporation    Rochester, NY 14608
Nov 11, 2008 By accommodating microscope lens or borescope, Luxxor Video Microscope lets users switch from external to internal inspection. Microscope attachment features f/4.5 zoom lens that delivers sharp close-up views of exterior of any metal machined part, casting, or welded part, with magnification ranges from 15-83x. Users can capture video or still images with included computer software, document inspection images, store and email images to others, and measure defects.

GAO Tek Inc.    Toronto M1B2K4  Canada
Nov 11, 2008 Utilizing macro-bending technique, GAO820 Optical Fiber Identifier can check and measure current signal without affecting normal transmission signal. It indicates 5 grades of signal intensity for signal frequencies of 270 Hz ±5%, 1 kHz ±5%, and 2 kHz ±5%. Specifications include 800-1,700 nm wavelength range, InGaAs detector, 250 µm adapter for bare fiber, 900 µm for tight tube fiber, and 3 mm adapter for tail fiber.

OceanServer Technology Inc.    Fall River, MA 02723
Nov 11, 2008 Offered in 0.6 in.² through-hole package weighing at 1 gm, OS4000-T Nano Compass is designed for mounting on system board and talking via TTL interface. It has 3-Axis magnetic sensors with 3-Axis accelerometers and provides nominal accuracy of 0.5°, 0.1° resolution, ±180° roll, and ±90° tilt. Compass includes ASCII interface, hard and soft-iron calibration, user-configurable data formatting, and 50 MIPS processor supporting IEEE floating point math.

Pentek Inc.    Upper Saddle River, NJ 07458
Nov 11, 2008 Designed for processing baseband RF/IF signals from communications receiver, Model 7153 4-channel, high-speed digitizer PMC module offers 2 modes of operation. Two-channel DDC mode delivers maximum decimation to 65,536 and lower bandwidth limit to 3 kHz, while 4-channel DDC mode provides independently programmable decimation range of 2-256 on each DDC, covering signal bandwidths of 700 kHz to 90 MHz. Unit also features built-in beamforming capabilities and 4 embedded power meters.

Omega Engineering, Inc.    Stamford, CT 06907
Nov 11, 2008 OM-EL-USB-TC data logger measures and stores over 32,000 temperature readings from either type J, K or T thermocouple, which plugs into miniature female receptacle at base of unit. Users can set up initial data logging parameters including thermocouple type, logging rate, start-time, high/low alarm settings, logging mode, and desired temperature units (°C or °F) and also download stored data by plugging module into PC's USB port and running accompanying software.

Andor Technology Ltd.    South Windsor, CT 06074
Nov 11, 2008 Dedicated to 1,064 nm Raman Spectroscopy, portable spectroscopic instrument is based around iDus InGaAs detector array camera and Bayspec Volume Phase Holographic Gratings (VPHG) spectrograph. It offers F/1.8 aperture, spectral resolution of 8 cm-1, and 3,000 cm-1 spectral coverage. Suited for research community and industry, instrument also features thermo-electric (TE) detector cooling down to -85°C and USB2.0 plug-and-play connectivity.

GDA Technologies, Inc    San Jose,, CA 95131
Nov 11, 2008 Bali Reference Board incorporates MPC5121e processor, based on scalable e300 Power Architecture(TM) processor core, which includes MBX Lite 2D/3D graphics engine and PowerVR geometry processing acceleration. Board also includes 512 Mb DDR-II SDRAM memory at 400 MHz, up to 128 Mb NOR Flash memory, up to 2 Gb of NAND Flash memory, and 80 Gb 1.8 in. HDD with PATA interface. Its dual radio module conforms to IEEE 802.11b/g wireless LAN and Bluetooth v2.0 with Enhanced Data Rate.

PerkinElmer, Inc., Life Sciences Headquarters    Boston, MA 02118
Nov 11, 2008 Designed for Spectrum(TM) 100 and 400 spectrometers, General Purpose Optical Bench accessory offers flexibility for laboratories performing advanced or specialized applications that are difficult to perform using base instrument's standard sample compartment. Unit attaches to side of baseplate, leaving standard sample compartment open for normal operation. Accessory can accommodate extra-large or specialized sampling systems such as cryostats, high-vacuum chambers, and specialized detectors.

Teseq, Inc.    Edison, NJ 08837
Nov 11, 2008 Multifunctional NSG 3040 can generate EFT tests to 4.8 kV, combination wave surges to 4.4 kV, and perform dip and interrupt testing, while internal coupling and decoupling network allows testing on ac and dc power lines of up to 260 V and 16 A. Unit features 7 in. color touch-screen, integrated Direct Test Access, and integrated keyboard or thumbwheel with additional keys for sensitivity adjustment. It is fully compliant to latest versions of IEC/EN 61000-4-4, -4-5, and -4-11.

SRI Connector Gage Co.    Melbourne, FL 32934
Nov 11, 2008 Combining digital wideband waveform modulator with RF upconverter and link test capabilities, SE-4255 RF Exciter and Test Signal Simulator produces transmission-ready signals in Baseband, Upper L-, Lower L-, and both transmit and receive S-Band frequency ranges. It features Auto-BERT, automated test application for construction and display of waterfall performance curves. Product suits mobile tracking and data systems, as well as flight systems integration, simulation, and testing.

Servomex Group Ltd    Crowborough East Su TN6 3DU  United Kingdom
Nov 10, 2008 In addition to fault and calibration histories, SERVOTOUGH Oxy offers NAMUR-compliant relay functions, allowing 2 concentration alarm levels, as well as maintenance required, service in progress, and instrument fault messages to be communicated remotely. Fully heated sample compartment removes requirement for sampling conditioning system on all samples with dew point up to 50°C. Located after measurement outlet, flow sensor guarantees accurate flow alarm settings.