Test & Measuring Instruments

Sensors Monitors & Transducers, Test & Measuring Instruments

Chemical Sight Gauges can withstand harsh fluids.

February 23, 2017

Chemical Sight Gauges are available in H-S3 and PH models. Featuring 316 stainless steel internal rods and aluminum locknut, H-S3 can be mounted to tank with 1.5 or 2 in. tank bushings and can measure up to tank depths of 12 to 120 in. Available with 1.5 or 2 in. tank bushings, PH model is made of high strength PVC gauge card.

Read More

Electronic Components & Devices, Test & Measuring Instruments

SC-100 AC-LVDT Signal Conditioner features front panel pushbuttons.

February 23, 2017

Offering 2.5, 5.0, 7.5, and 10.0 KHz of excitation frequencies, SC-100 AC-LVDT Signal Conditioner features RS-485 digital communication port. Designed with 0 -5, 0 -10, +/-10, 0.5 - 4.5, 1- 5, 0.5 - 9.5 VDC analog DC outputs and 4-20 mA or 0-20 mA current loop DC outputs, unit’s internal microprocessor eliminates need for calculating jumper settings of gain and range. Unit comes with 15-30 V... Read More

Health, Medical, & Dental Supplies and Equipment, Test & Measuring Instruments

Mallory Sonalert Audible Medical Alarms meet IEC60601-1-8 standards.

February 23, 2017

Available in speaker MSS and SBS and piezoelectric SBT transducer types, Mallory Sonalert Audible Medical Alarms are used for hospital beds, drug dispensers, defibrillators, dialysis, MRIs, surgery equipment and incubators. Suitable for handheld devices, MSS and SBS provide 85dBa to 95dBa at 10cm loudness. Offering ultra-low current, SBT piezo series deliver 95dBa to 105dBa at 10cm loudness.... Read More

Test & Measuring Instruments

MAQ20® Data Acquisition and Control System meets ANSI/IEEE C37.90.1 standards.

February 23, 2017

Available in MAQ20-DIV20/MAQ20-DIVC20 and MAQ20-DODC20SK models, MAQ20® Data Acquisition and Control System come with PID control, alarms, counters and timers. MAQ20-DIV20/MAQ20-DIVC20 modules offer 1500Vrms input-to-bus isolation and each channel is protected to 150Vrms overload. MAQ20-DODC20SK feature 1500 Vrms output-to-bus isolation and each channel is protected to 60VDC overload. Units... Read More

Test & Measuring Instruments

Unitizer 150F Flow Meter comes with PLC control.

February 23, 2017

Enabling customer to regulate and track cohesive flowrate, range and amount, Unitizer 150F Flow Meter can store up to 1,000 history logs for customers to identify patterns. Unit can integrate with plant requirement and set off alarm. Product is water-based cohesive and is used in polybag applications like animal feed. Using Unitizer 150F simple retrofit can be done in 30 minutes.

Read More

Test & Measuring Instruments

TempGenius Provides the Highest Standard of Temperature Recorders

February 23, 2017

United States - 21-02-2017. TempGenius is your #1 resource for high-quality and most sophisticated temperature recorders. These recorders are smart devices intended to provide you the accurate information about the current situation. Measuring, monitoring and controlling the value of temperature or humidity are being the necessity for almost all type and size of industries. To make this task... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

KD-5100 Differential Measurement System features low power consumption.

February 20, 2017

Available in package of 2 x 2.12 x 0.75 in. thickness, KD-5100 Differential Measurement System features two sensors per channel matched precisely to give a nanometer resolution. Unit comes in rugged construction with mean time between failures 238,000 and 55,000 hours in space flight and tactical environments respectively. KD-5100 is suitable for night vision systems, precision telescope... Read More

Architectural and Civil Engineering Products, Test & Measuring Instruments

Framed or Frameless Cleanroom Windows

February 20, 2017

Fullerton, CA – BioSafe® Cleanroom Windows, manufactured by Terra Universal, are designed as framed or frameless, offering the cleanest solutions to strict cleanliness requirements. Both window types are installed flush against the clean side of the wall, reducing surface area where particles accumulate. The designs are meant for fast installation in a variety of wall materials and... Read More

Services, Test & Measuring Instruments

Viscom’s S3088 Ultra Gold Wins the NPI Award for Test & Inspection - AOI

February 17, 2017

Duluth, GA, February 2017 - Viscom announces that it has been awarded a 2017 NPI Award in the category of Test & Inspection - AOI for its 3D AOI system - S3088 ultra gold. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO. The S3088 ultra gold reaches image data rates of up to 3.6... Read More

Communication Systems & Equipment, Sensors Monitors & Transducers, Test & Measuring Instruments

Condor VPX-H265-SDI Encoder supports variable and constant bitrate configurations.

February 17, 2017

Capable of encoding and streaming two 3G-SDI, HD-SDI, or SD-SDI inputs simultaneously, Condor VPX-H265-SDI Encoder features dual 3G-SDI inputs. Designed with 1 Gbps Ethernet output and application programming interface, product can withstand vibration, shock, and humidity and can be operated in -40°C to 85°C temperature range. Supporting CoT, KLV and VANC metadata insertion, unit is used in... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Coating Thickness Gauges offer automatic substrate detection.

February 17, 2017

Available in CMI155 and CMI157 models, Coating Thickness Gauges feature single-button operation. Designed with dual technology and integrated probe, units provide rapid inspection of paint, lacquer and protective single layer coatings on metal substrates. Units are factory calibrated and are rated to IP52 standards. Gauges are suitable for paint and powder coaters, coating inspectors,... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Power Current Sensors enable high-precision measurements.

February 16, 2017

Designed with high power and low TCR resistors, Power Current Sensors offer resistance in 1 mOhm to 10 Ohms range and TCR down to 3 ppm. Using external heat sink, sensors provide three times more power rating. With ±0.01% load stability and resistance tolerance, units are lead free RoHS compliant and are available in 73 standard packages.

Read More

Electrical Equipment & Systems, Test & Measuring Instruments

PowerMAX 365 Series Lamps feature thermal cut-off circuitry.

February 16, 2017

Available in high-intensity and standard intensity versions with each model in with or without back light filter, PowerMAX 365 Series Lamps are suitable for NDT inspection booths, fluorescent penetrant, magnetic particle inspection and screening of fluorescent particles. Units provide 2000 µW/cm² UV-A intensity and 38 cm x 15 cm coverage area. Delivering 5 lux light emission, lamps meet ASTM... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Oakshire Cultivates Mushroom Quality with Signature Touch Metal Detector from Mettler-Toledo Safeline

February 13, 2017

February 9, 2017 – Oakshire Mushroom Farm is an award-winning innovator and patent holder in the mushroom industry. In business for more than 31 years, the fungi producer develops, grows and packs their own OAKSHIRE branded products as well as DOLE® mushrooms, as the exclusive licensee in North America. When Oakshire needed a new metal detector in 2015 to accommodate rising demand, they... Read More

Test & Measuring Instruments

CRD-060DD17P-2 Demonstration Board comes with active start-up circuit.

February 13, 2017

Reducing start-up loss, CRD-060DD17P-2 Demonstration Board is operated in 300 V to 1000 V input voltage range. Delivering 48W of power, unit is designed with 1700 V SiC MOSFET. Suitable in auxiliary power supplies and switch mode power supplies, CRD-060DD17P-2 uses ultra-low drain gate capacitive C2M1000170J power transistor.

Read More

Test & Measuring Instruments

1000-Zygo Inspection Gage comes with anti-vibration technology.

February 13, 2017

Using white-light interferometry and diamond-tipped probe, 1000-Zygo Surface Finish Inspection Gage is used to measure roughness and waviness. Providing precise inspection of crankshaft and camshaft surface geometries, unit is designed with user-friendly software for speed and eased surface inspection. 1000-Zygo is constructed with granite and steel.

Read More

Communication Systems & Equipment, Test & Measuring Instruments

WirelessHART Power Meter offers secure and reliable data transmission.

February 10, 2017

Enhancing granular energy management and effective equipment monitoring, WirelessHART Power Meter delivers measurement solution to improve energy efficiency and sustainability. Designed for monitoring voltage, current, power and energy on single- and three-phase electrical systems, unit provides real-time monitoring of electricity consumption.

Read More

Test & Measuring Instruments

IKS9 Magnetic Measuring Head used to measure angle, distance and position.

February 10, 2017

Available in 11 mm and 9 mm wide design, IKS9 Magnetic Measuring head can be used in most confined spaces. Unit is suitable for automation, instrumentation and motion control applications for high accuracy and degree of modularity. Meeting ISO, DIN, IATA and ABA standards, IKS9 is used with various magnetic coercivities and specially designed for reading magnetic ink.

Read More

Test & Measuring Instruments

PosiTector Shore Hardness Durometer comes with PosiSoft software suite.

February 10, 2017

Designed with shock-absorbing, protective rubber holster with belt clip, PosiTector Shore Hardness Durometer features USB port and posiSoft USB drive for simple connection to PC and for accessing web browsers or file explorers. Designed with digital display with reset feature, unit continuously displays average, min/max hardness and standard deviation. PosiTector is available in Shore A and... Read More

Test & Measuring Instruments

F123 Series Prototyping 3D Printer produces prototype at low cost per part.

February 9, 2017

Supporting wide range of prototyping and tooling applications, Stratasys F123 Series Professional Prototyping 3D Printer comes in F170, F270 and F370 models in 10 in. to 14 in. sizes. F123 Series takes on complete workflow from initial concept verification to design validation and ensure shorte lead times. Product comes with Stratasys Insight software and GrabCAD Print.

Read More