Honeywell International    Freehold, NJ 07728
May 25, 2012 Experion® MX Quality Control System (QCS) is capable of making Transmission Infrared (TRIR) Fiber Weight and Moisture Measurements via sensor that simplifies overall operations in tissue production industry. Sensor provides measurement of both dry weight and moisture while decreasing sensitivity to environmental factors such as temperature and head alignment. Solution can also be retrofitted to replace older systems containing nuclear source betagauges.

H-B Instrument Co.    Collegeville, PA 19426
Feb 29, 2012 Polycarbonate hydrometer series features shatterproof design, glass-like clarity, and easy-to-read scale. This line of hydrometers covers most popular ranges of specific gravity: brix, baume, sodium chloride, and salt brine. Each item is calibrated against NIST standards and includes statement of accuracy traceable to NIST.

Eagle Eye Power Solutions, LLC    Milwaukee, WI 53211
Nov 14, 2011 Using optical refraction, Model SG-1000 measures temperature-compensated specific gravity of batteries with 3 second measurement speed. To measure, user extracts sample in suction tube and presses START button. CE-certified unit can measure specific gravity and temperature simultaneously. Housed in carrying case weighing less than 5 lb, Model SG-1000 features measurement range of 1.000-1.3000 and operating temperature of 41-104°F.

Measurement Specialties, Inc.    Hampton, VA 23666
Oct 25, 2011 Featuring 30 mm dia aluminum alloy port with O-ring seal and 4-pin integral connector, HTM2500B3C4OIL provides voltage output with max water content sensed being saturation level of liquid. Typical saturation level of lubricants and oils is between 500 and 1,000 ppm. To aid interpretation, look-up tables are provided via datasheet documentation that convert voltage output to water in oil content. Accurate to ±1°C, temperature sensor is embedded in each unit.

Mettler-Toledo International Inc.    Greifensee 8606  Switzerland
Oct 10, 2011 Designed to measure key parameters such as specific weight, refractive index, and pH value in one fully automated process, LiquiPhysics Excellence Meters monitor production of food flavorings, from raw product up to final flavor. Depending on number of samples, measuring devices can be operated by automation units to measure either individual samples or sample series. LabX 2010 laboratory software enables LiquiPhysics Excellence measuring systems to be integrated into ERP systems.

RheoSense, Inc.    San Ramon, CA 94583
Aug 11, 2011 Supporting range of applications, µVISC(TM) (micro VISC) employs VROC® (Viscometer Rheometer on-a-chip) with HC chip that supports testing of viscosity ranges to 20,000 mPas or greater. Tests can be completed within 1 min with 3-step operation, and menu-driven application lets user view graphs of results and generate report. Specific uses include testing and evaluating materials such as inks, biologics, chemicals, oils, and other liquids.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Jul 18, 2011 Gelatin Bloom Strength Test system includes CT3 Texture Analyzer for measuring bloom strength, 2 baths, and one refrigeration unit for gelatin preparation. Texture analyzer combines operation that accommodates users of all experience levels and test method capability in compression and tension modes of operation. Variety of standard probes - cones, cylinder, blades, balls, punches - and fixtures -extrusion, cell, shear cell, grips, etc. - are available.

E Instruments International LLC    Langhorne, PA 19047
Jul 13, 2011 Featuring ice blue LCD, HM100 Pin Moisture Meter detects moisture levels of materials and displays min/max values. Specific compatible materials include softwood, such as birch, beech, spruce, walnut, cherry tree, and larch; hardwood, such as oak, pine, ash, and maple; concrete; plaster; and bricks. Provided with protection cap and extra set of pins, unit can be used in diverse markets and applications, including IAQ, HVAC, Home Inspections, Commercial Building Inspections, and others.

Cambridge Viscosity, Inc.    Medford, MA 02155
May 23, 2011 With Continuous Flow Adapter, SPL-440 high-pressure viscosity sensor can be utilized to understand core rock permeability under dynamic fluid conditions. Researchers can track oil extraction effectiveness in situations of varying reservoir fluid mixtures found in target oil fields. Fluid is directed through adapter's coaxial manifold directly in and out of SPL-440 sensor to analyze viscosity under flow conditions, and then into core sample for permeability analysis.

Konica Minolta Sensing Americas, Inc.    Ramsey, NJ 07446
May 04, 2011 Handheld spectrodensitometers are available in FD-5 series models that measure density and color, as well as FD-7 series units that can also monitor paper, inks, and plant lighting conditions. Models in FD-7 series offer scanning mode for creation of ICC profiles, and can measure over 400 times/sec. Able to account for fluorescence of paper substrate, both products also allow users to provide measurements that comply with Flexographic Image Reproduction Specifications and Tolerances.

Integrated Sensing Systems    Ypsilanti, MI 48198
Feb 18, 2011 Featuring UL, cUL, and ATEX certification, FuelSense(TM) provides density range of 0.6-1.3 g/cc with ±0.001 g/cc accuracy and temperature range of 5-60°C. By adding meter to existing volumetric flow meters, mass flow can be tracked in critical custody transfer operations. IP67/NEMA 4X-rated meter is also suitable for hydrogen and methane applications for density and concentration of gas mixtures. With remote data logging option, 2 GB of data can be logged and stored internally.

PTi - Processing Technologies International, LLC.    Aurora, IL 60502
Jan 24, 2011 Developed to compliment HVTSE (High Vacuum Twin Screw Extrusion) system for dryer-less production of PET sheet, Intrinsic Viscosity (IV) real-time monitoring system is based on measurement of melt temperature and capillary piping pressures. Viscosity and subsequent intrinsic viscosity are calculated to ±0.02 dl/g accuracy, and extracted test data is continuously fed into TITAN control system for display, storage, and access.

BugLab LLC    Danville, CA 94526
Dec 07, 2010 Used for directly measuring optical density (OD) through walls of shake flasks and other small vessels, OD Scanner eliminates need to open containers as well as labor, contamination risk, and inaccuracy associated with sampling and dilution. Measurement is reported within 3 sec after user points scanner into flask, only 1 cm of fluid is required to be present. Scanner directly reports optical densities from 0.1-50 across 125-2,000 mL vessels made of materials glass, PC, and PET.

Eagle Eye Power Solutions, LLC    Milwaukee, WI 53211
Oct 26, 2010 Featuring leak-proof housing, SG-Ultra Max measures density and density-related values of samples and shows measuring results within seconds on LCD, ready for storage, printout, or export to PC using IR data interface. Unit can store up to 100 sample IDs, up to 20 measuring methods, and up to 1,024 measurement results. With accuracy of 99.999%, instrument is suited for food and beverage, pharmacy/chemistry, electrical engineering, environmental, petro chemistry, and battery testing applications.

Modern Process Equipment, Inc.    Chicago, IL 60623
Aug 31, 2010 Utilizing Allen-Bradley PLC technology, Reliadens(TM) Automated On-Line Density Sampling system allows fish food manufacturers to continuously monitor bulk density, after extruder and coater, to provide continual, closed-loop control of process settings. System draws product sample from process stream, measures density, and returns product to stream with zero waste. With accuracies to 1 g/L, unit can take samples as often as every 30 sec.

Eagle Eye Power Solutions, LLC    Milwaukee, WI 53211
Apr 14, 2010 Offering 99.999% accuracy rate and 1,100 result internal storage capacity, SG-ULTRA lets users safely test and record temperature compensated specific gravity of batteries. CE-compliant product, which includes Battery Management Software Package, is equipped to test flooded lead-acid and Ni-Cad batteries and offers IR Computer Link to facilitate uploading to computer. Supplied in protective boot, hydrometer runs on 2 AAA batteries that provide ~90 hr operation.

Endress + Hauser Inc.    Greenwood, IN 46143
Mar 29, 2010 Providing online measurement of density and concentration, Liquiphant M eliminates need for off-line procedures and laboratory analysis. Unit includes built-in density calculator that can be customized by end user with complex tables and mathematical interdependencies. Because Liquiphant M provides on-line measurements, control systems can react to changing process conditions and take corrective action immediately by performing closed-loop control.

Hunter Industries    Cary, NC 27511
Feb 03, 2010 Hard-Wired Rain/Freeze-Clik(TM) Sensor has Quick Response(TM) feature that shuts irrigation system down as soon as it starts raining. Enclosed in polycarbonate housing, device also offers freeze detection that shuts off system when temperatures fall below 37°F to avoid ice build up on landscapes, walkways, or roadways. Slots on side of housing let air flow around sensor to enable accurate temperature readings. Metal extension arm and 25 ft of wire are included.

Emerson Process Management    Austin, TX 78754
Oct 26, 2009 Micro Motion® H-Series Coriolis meters include Micro Motion Model 2400S transmitter, with MVD(TM) digital processing for sensor health to be monitored while meter is in-line, and which maximizes performance for empty-full-empty batching. Meters have mass flow accuracy up to ±0.1% and volume flow accuracy up to ±0.15% on liquids, mass flow accuracy of ±0.5% on gases, and liquid density accuracy up to ±0.001 g/cc. They mount remotely or in control room using DIN rail, panel, or rack format.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
Sep 18, 2009 Designed to monitor inorganic chemicals such as hydrochloric, nitric, and sulphuric acid, Micro Motion® 7826 insertion-style liquid density and concentration meter uses vibrating fork and is suited for continuous, real-time measurement and control. Corrosion-resistant instrument, suited for use in pipelines, bypass loops, and tanks, is insensitive to vibration, temperature, and pressure variations. Measurement accuracy is rated to ±0.001 g/cm³ for density and ±0.1% for concentration.