Macron Dynamics Inc.    Croydon, PA 19021
May 02, 2012 Available as option or retrofit on vertical automation applications using Macon belt-driven actuators, CLAWS(TM) Cam Lock Arresting Wedge System prevents cart freefall in event of belt breakage. System uses carbon fiber impregnated Poly Chain® toothed belt, which is housed in actuator's aluminum beam t-slot, and coupled with wedge device, which integrates with tensioning mechanism under cart. Belt failure simulations have been successfully tested with loads of 200 lb.

Miller Fall Protection    Franklin, PA 16323
Nov 30, 2011 Meeting OSHA and CSA Z259.14-01 Type A performance requirements, Miller StopFall(TM) work positioning and fall restraint system helps linemen naturally climb wood poles with circumference from 20-60 in. Minimized adjustment points foster accelerated operation, while spring-loaded cinching feature provides effective, non-slip system that keeps unit in constant contact around pole. Protective spring cover with non-metal zipper facilitates access for component inspection and cleaning.

Miller Fall Protection    Franklin, PA 16323
Aug 19, 2011 Miller ShockFusion(TM) Permanent Horizontal Lifeline (HLL) Roof System attaches to surface of existing industrial/commercial roof structures. If fall occurs, energy-absorbing, load distributing design ensures secure connection to roof while protecting underlying structure. End/corner posts also manage system forces without tipping, minimizing lifeline deflection and increasing safety. Continuous pass-through design provides safe access to all areas of roof for up to 6 workers per system.

CXtec    Syracuse, NY 13212
May 11, 2011 When used together, H-Series 16-port module and 8-fiber Skinny-Trunk® harness let users to match and replicate 8, 16, 32, or 64 fiber optic switch ports per TIA-942 data requirements. Products also provide flexibility with which to make adds, moves, and changes. H-Series 16-port module allows for port replication while maintaining migration path to 40/100 Gig speeds in data center by maintaining necessary fiber counts and decreasing insertion loss.

Miller Fall Protection    Franklin, PA 16323
Aug 27, 2010 Designed to tie back anywhere along lifeline, Turbo TBAK Personal Fall Limiter incorporates web retractable with 7.5 ft working capacity and anchorage connector. Web lifeline extends and retracts without interruption, and Xtreme performance webbing resists abrasion. Specifically designed for tieback use, Miller 5K® locking snap hook provides 5,000 lb gate load capacity from any angle. Turbo TBAK PFL meets all applicable OSHA, ANSI, CSA, and CE standards.

Garlock Equipment Co.    Plymouth, MN 55447
May 17, 2010 Compliant with OSHA regulation 1926.502(d), Cobra Lifelink(TM) enables 1 or 2 people can tie-off to when they are on elevated job site. Mobile anchorage system provides fall arrest for one worker and fall restraint for second. Able to fit into elevators and pickup trucks as well as through doorways, compact and modular design rolls to where it is needed. No anchorage to substrate is required, and if fall arrest occurs, claw located under unit penetrates substrate to securely hold cart.

Capital Safety    Red Wing, MN 55066-5005
Apr 09, 2010 Providing both climbing assistance and fall protection to workers ascending fixed ladder system within wind turbine tower, Lad-Saf® lifts between 20-55 kg, reducing climber's weight by that amount and facilitating quick, fatigue-free climbs. System is powered by 240 V motor, and includes top and bottom ladder bracket assemblies, motor assembly, and control panel. Installed using standard tools, product can be retrofitted into any size tower.

DBI-SALA    Red Wing, MN 55066-5005
Mar 03, 2010 Delta(TM) REPEL(TM) full body harnesses, Force2(TM) REPEL(TM) shock absorbing lanyards, and REPEL(TM) pole straps are constructed from specialized textile, REPEL technology webbing, which exhibits water resistance, natural self-cleaning effect, and durability. Catering to range of applications and needs in workplace, abrasion resistant products meet AS/NZS 1891.1:2007 requirements and also integrate RFID-enabled i-Safe(TM) intelligent safety system.

Capital Safety    Red Wing, MN 55066-5005
Dec 07, 2009 Incorporating AS/NZS1891.1 certified fall arrest harness and personal flotation device (PFD) in one unit, ExoFit(TM) XP Flotation Harness provides fall- and buoyancy-protection for workers in marine environment. PFD automatically inflates within 3 sec of being immersed in water and turns user onto his back, ensuring safety even when person is unconscious. Built-in i-Safe(TM) system utilizing RFID technology aids inspections, while stainless steel connection hardware reduce risk of corrosion.

Capital Safety    Red Wing, MN 55066-5005
Oct 30, 2009 ExoFit NEX(TM) offers one-time adjustment that lasts all day and ensures snug fit for safety. It features Duo-Lok(TM) quick-connect buckles with secure locking mechanism and locking Revolver(TM) ratcheting torso adjustor. Harness has reflective material throughout and is constructed with abrasion/water resistant webbing. It includes lightweight, breathable padding on shoulders, back, hips, and legs; padded belt; chest platform with labels and i-Safe(TM) RFID tag; and suspension trauma straps.

Capital Safety Group (Australia) Pty Ltd    Silverwater NSW 2128   Australia
Oct 27, 2009 Anchor on the Go(TM) temporary roof anchor for metal roofs provides 15 kN fall arrest rated anchor point. System installs by sliding bottom angle under roof sheeting, with main post resting on pan, and then pushing locking cams into place using easy-grip levers. To remove, steps are completed in reverse. Anchor is suitable for use in residential, commercial, and industrial applications.

Capital Safety    Red Wing, MN 55066-5005
Sep 30, 2009 Allowing linemen to free-climb poles with 100% fall protection, Saflok(TM) Pole Anchor System enables workers to climb into position around pole obstructions, such as multiple conductors, equipment, vines, and foliage. Stored in weather-proof bag, system comes with anchor tube, 80 ft dielectric rope lifeline, installation/removal tool, carabiner, and rope grab with integrated shock absorbing lanyard.

Capital Safety    Red Wing, MN 55066-5005
Sep 28, 2009 Comprised of one harness and 2 shock-absorbing lanyards, Nomex®/Kevlar® High Temperature fall protection products are suited for Hot Work and high-voltage electrical utility applications. Kevlar® thread used in stitching and removable Nomex® cover that protects lanyard shock pack casing are resistant to heat, flame, cuts, and abrasion. Lanyards accommodate workers who have combined body weight with tools and equipment from 50-160 kg.

Capital Safety    Red Wing, MN 55066-5005
Aug 26, 2009 Designed to be inserted into pre-drilled 19 mm hole in cured concrete, Saflok® Concrete Wedge Anchor provides 22 kN fall arrest-rated anchor point for personal fall arrest system, work positioning system, or rescue system. Easy grip trigger and quick-release plug provide immediate anchor removal. Constructed from non-corrosive materials, reusable anchor includes swiveling forged connection ring that provides tie-off point for fall arrest system.

Capital Safety    Red Wing, MN 55066-5005
Jun 01, 2009 Designed for telecom and power industry personnel working on towers and poles, Delta(TM) Tower Workers Harness features spring loaded stand-up rear D-ring, easy adjust hardware, protective label/instruction pack, and i-Safe(TM) intelligent safety system for monitoring use and maintenance. Other features include front fall arrest belay loops, confined space loops, side angled D-rings, pole work D-rings, padded work positioning seat, and lower back pad.

Capital Safety    Red Wing, MN 55066-5005
May 28, 2009 Climb Assist Ladder Safety System provides both climbing assistance and fall protection to workers ascending fixed ladder system within wind turbine tower. Utilizing 220 V motor, system is designed to lift between 45-120 lb, reducing worker fatigue and allowing for faster climbs. System includes top and bottom ladder bracket assemblies, motor assembly, and control panel, and can be installed using standard tools.

Capital Safety    Red Wing, MN 55066-5005
May 26, 2009 ExoFit(TM) Wind Energy Harness has protective hip pad to prevent wear from repetitive motion as well as built-in tool loops to hold equipment during climb. Features include quick-connect buckles, front D-ring for climbing or controlled descent, side D-rings for positioning, and dorsal D-ring for fall arrest. Featuring twin legs for 100% tie off, Force2(TM) Wind Energy Lanyard protects workers up to 310 lb from 12 ft free falls. It is available either as polyester rope or elastic polyester webbing.

Capital Safety    Red Wing, MN 55066-5005
May 14, 2009 Providing up to 61 m of hands-free mobility, evolution(TM) 200 Horizontal Lifeline System features high-tension design that minimizes fall clearance requirements to 4.2 m. Single line setup supports one user, but second line can be added. Designed to attach to StrongArm(TM) Frames to provide overhead anchorage point, system features 24-61 m stainless steel cable in 6 m increments. It suited for railcar and tanker inspection, loading and unloading, and mass transit vehicle inspection.

Capital Safety    Red Wing, MN 55066-5005
May 14, 2009 Using Mastsayf(TM) Flexible Cable System, workers that climb towers in energy and utilities industry can safely ascend and descend completely unrestricted. Connecting device that attaches to front fall arrest D-ring of user's full body harness and lifeline has swivel that provides hands-free operation while limiting free falls to max of 600 mm. Since no drilling or welding is required, system is suited for permanent or temporary use.

Gorbel Inc.    Fishers, NY 14453 0593
Feb 11, 2009 Available in monorail and bridge models, Tether Track(TM) rigid rail systems are designed to exceed OSHA 1926 Subpart M Construction standard as well as ANSI Z359 Fall Protection Code. Systems support multiple workers, each weighing up to 310 lb with tools. Monorail models are suitable for applications where worker needs to travel in straight line, while bridge models provide optimal coverage when worker's duties require movement along X and Y axes.