Atlas Copco Tools & Assembly Systems
Auburn Hills, MI 48326
Nov 04, 2008 Featuring ergonomic design that enables all-day use, LTP 61 employs high-speed motor for fast rundown and high-torque motor for reliable tightening. Exhaust air is piped through handle into hose, minimizing noise from pneumatic system, and no noise is generated by actual process. In addition to shut off mechanism, tool also features torque-reaction bar to minimize operator wrist and arm strain caused by reaction force.

Mountz, Inc.
San Jose, CA 95112
Sep 02, 2008 Suited for bottle, SMA connector, and medical device manufacturers, torque wrench head can used for round knurled or non-knurled nuts as well as tube shapes that will not collapse under torque pressure. Roller grip head has soft grip material that will not damage targets, and spring-loaded design promotes snug fit. Also, break-over design limits amount of torque applied to assembly or fastening application and is controlled via tamper-proof internal adjustment system.

Acument(TM) Global Technologies North America
Sterling Heights, MI 48314
May 30, 2008 Torx Plus® Maxx concentrates highest available levels of torque directly to studs, ball studs, and threaded fasteners. Studs feature drive lobes that extend into threaded portion of fastener point, and full engagement between drive socket and assembly tool spreads surface contact. Established fastening angle enables stems to achieve up to 95% of blind hole torque before failure. Tool can also hold threaded parts, studs, and ball studs stationery while nut is torqued to proper setting.

TorcUp
Easton, PA 18040
Apr 07, 2008 Available in 5 sizes, Raptor Torque Wrench accommodates torque needs from 120-6,000 lb-ft. It features sealed housing and ergonomic grip, ensuring comfort of operator and safe operation. Patented gear technology minimizes operational temperatures, while custom-designed motor is specifically intended to withstand heavy industrial use.

Ingersoll-Rand Co.
Annandale, NJ 08801
Mar 20, 2008 Suited for industrial, assembly, and MRO applications, QA8 series pneumatic nutrunners can be used on hard or soft joints, including plastics, composites, or metals and include ergonomic grips. Devices operate via lubrication-free motors and utilize adjustable shut-off clutches and reverse rings. They are customizable to operator's application in both straight and angle configurations.

Norbar Torque Tools, Inc.
Willoughby, OH 44094
Mar 13, 2008 Available in 5 models ranging from 15-221 ft-lb, TruTorque Wrenches include coarse scale on handle and micrometer for fine setting. All models offer bi-directional torque control, essential for left hand threads and for controlling maximum break-away torque. Featuring ergonomic grip and slip resistance in all conditions, wrenches move with fingertip control over whole length of scale. They include reversible ratchet, and lock to prevent accidental adjustment of set torque.

K-Tool International
Wixom, MI 48393
Jan 15, 2008 Designed for automotive applications, digital torque wrenches employ series of lights and alarms that immediately alert user to torque readings over or under entered values. This ensures components are tightened to their specific torque values, eliminating operator error. Built with non-slip grip, 36-tooth gear, and lever-type ratchet, products have backlit LCD screen and offer 4-button operation: power on/off; unit of measurement; torque target up; and torque target down.

Cooper Power Tools
Lexington, SC 29071
Aug 29, 2007 Constructed with ergonomic weight and size considerations, Cleco® 18-48 series uses brushless motor with high-resolution resolver and mechanical reaction transducer technologies. Products are offered in angle, pistol, and in-line versions, delivering torque from 2-230 Nm to accommodate bolt sizes from M5-M16. Designed to promote speed, angle, and torque control during operation, series incorporates low-compression mechanical start switch and on-board memory chip.

Binder-USA
Camarillo, CA 93012
Jul 12, 2007 Ensuring correct torque value of 0.6 Nm, Torque Wrench aids in connecting standard M12 field-attachable cable connectors with hex-shaped locking nuts. It also allows connectors to be unmated as it locks when motion is reversed. Featuring comfortable grip and replaceable jaws, wrench helps guarantee IP67-rated connection.

Ingersoll-Rand Co.
Annandale, NJ 08801
Jul 12, 2007 Engineered for industrial and assembly professionals, Series QA6 nutrunners can be used on hard or soft joints including plastics, composites, or metals, and are suited for fastening applications that require precise torque control. They feature ergonomic grips, externally adjustable shut-off clutches, and conveniently located reverse rings. Units run off lube-free motors and are customizable to operator's application in straight and angle configurations.

Wright Tool Co.
Barberton, OH 44203
Apr 13, 2007 Available in ¼, 3/8, and ½ in. models, Computorq III E-WRENCH digitally displays fastener torque specification settings, torque readings, and peak hold measurements on LCD display. Keypad has selectable torque units and conversion readout in ft-lb, in-lb, kg-cm, and Newton meters. Offered with ¾ or 1 in. drive, Computorq II stores up to 4,000 torque values in memory and can download individual values or stored values to printer, computer, or data logger via modem.

Ingersoll-Rand Co.
Annandale, NJ 08801
Jul 26, 2006 Featuring lightweight design, QA4 Series is fully adjustable in straight or angle configurations with fixed or floating spindles, and shut-off or stall to 40 lb-ft. Tools withstand high-volume use and are suited for motor vehicle, appliance, aerospace, and other general industrial applications.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
Jun 12, 2006 Available in 2 models with torque ranges of 10-50 lbf-in. and 30-250 lbf-in., T-Series manual torque-control wrenches is accurate to ±3% in direction of torque calibration from 20-100% FS. Wrenches have audible click to indicate torque has been reached, and can be calibrated using English or metric settings. Interchangeable heads are available including ratchet head, box-end, or open-end drivers.

Tohnichi America Corp.
Northbrook, IL 60062-2420
Jun 12, 2006 Data Tork CEM3 features lightweight aluminum body and provides 999 data measurement storage capability. It incorporates dual LCD/LED displays, time and date function, judgment parameters, and tightening mode to ensure quality control. Targeting applications where precision fastening and torque measurement is vital, wrench is available in 8 models and in American, Metric, and Newton measurements.

Snap-on Industrial
Kenosha, WI 53141 1410
May 16, 2006 Available in 3/8 and ½ in. flex-ratchet sizes, TechAngle(TM) Torque and Angle Wrench allows technician to apply torque load and then read out additional applied angle with one tool. Torque plus angle method helps remove friction and variability from process by specifying torque preload and additional angle of rotation to predict bolt stretch and applied torque. In addition to ignoring reverse rotation, wrench beeps and vibrates when technician ratchets to angle preset.

Tohnichi America Corp.
Northbrook, IL 60062-2420
Dec 20, 2004 Offered in torque range from 0–600 to 0–3,000 lb-ft, DB Dial Indicating Torque Wrenches have one dial that measures and adjusts torque from both directions. Moveable dial enables torque pointer to be preset to desired torque. QL Click Type Torque Wrenches have audible click that indicates proper application of torque. Fixed ratchet head has 24 teeth, and movement at 15° intervals allows for tightening in confined spaces. Torque ranges from 4–750 to 15–1,500 lb-ft.

Norbar Torque Tools, Inc.
Willoughby, OH 44094
Mar 02, 2004 Pneutorque Model PT52 offers torque capacity of 205 lb-ft with max speed of 125 rpm or 123 lb-ft with max speed of 200 rpm. Basic stall tool employs inlet air pressure to control torque, while electronic shutoff version includes torque transducer, torque display, and internal solenoid valve. Suited for valve and pipe work and maintenance and assembly applications, wrench provides smooth, continuous operation at low sound and vibration levels.

Ridge Tool Co.
Elyria, OH 44036
Feb 09, 2004 Designed for underground pipe installations that use no-hub couplings, Model No. 904 eliminates guesswork and assures proper coupling tightness for leak-free joints. Wrench has 80 lb-in. torque setting and 3/8 in. drive that tightens hubless couplings with ratcheting action. Click sound occurs when releasing to assure user when desired torque has been achieved. Product is constructed of stainless steel and corrosion-resistant painted steel.

RS Technologies, Ltd.
Farmington Hills, MI 48335
Oct 07, 2003 Electronic, 300 lb-ft hand torque wrench offers low-level analog input capability and is compatible with strain gage instruments and data collectors. It can be used by QC inspectors and technicians seeking to verify that proper torque has been applied to fastener. Wrench is 28 in. long with comfortable foam handgrips, and is suited for light and large truck and off-highway vehicle assembly operations.

Tohnichi America Corp.
Northbrook, IL 60062-2420
Jul 11, 2003 Offered with interchangeable heads, CTB utilizes T-Point Retightening Torque Method, which measures minimum value of retightening torque and works to eliminate risk of human error. Suited for automotive and industrial quality control applications, tool incorporates green lamp/alarm that signals when operation is complete. Unit can also transfer RS232C and infrared torque data.