Bondhus Corp.
Monticello, MN 55362 9347
Oct 07, 2008 Able to reach screws in tight or obstructed areas, Stubby Hex Tools are made from Protanium® steel with ProGuard® finish for corrosion protection. Short arm is bent with tight radius and finished with chamfered end, while long arm has ball end tip to speed insertion or extraction of screws at angles up to 25°. Stubby hex keys eliminate need to trim and file short arm, which could introduce burrs, soften steel, and result in stripped screw heads.

Danaher Tool Group
Hanover, MD 21076
Sep 17, 2008 Available in ¼ and 3/8 in. drives, Roto Ratchet is 2-piece set with 72 fine tooth gear that allows for 5° of swing arc and meets ANSI strength requirement. Roto Ratchet also has comfortable cushion grip. With T wrench and reversing lever, 114-piece GearWrench Ratcheting Tap & Die System includes 9/16 to ¾ in. and 14-18 mm sizes, and eliminates tedious hand-over-hand action with its 5° fine-tooth design. Hand tools target automotive technicians and machinists.

Wright Tool Co.
Barberton, OH 44203
Sep 02, 2008 Offered in 8 lengths from 4-24 in. with chrome or black oxide finish as well as laser-etched inch and metric gradient scales, wide-opening adjustable wrench accommodates bigger nuts and bolts via extra-wide jaw opening standard on lengths 6-12 in. Jaw design is optimized for grip, preventing slippage or nut round off, while creep feed ground parallel face ensures smooth, tight operation. Four-thread knurl and non-protruding jaw promote performance in confined spaces.

A & E Hand Tools / A & E Inc.
Racine, WI 53401
Jul 16, 2008 With fine tooth ratcheting feature, 9-Piece Wrench Set No. 5333 allows positioning of wrench-driving end for tensioner access from any angle, and direct access to tensioners without removing engine accessories or frame components. Set includes 8 interchangeable adapters that allow service to most serpentine belt applications including GM, Ford, Dodge, Toyota, Saturn, and Volkswagen.

A & E Hand Tools / A & E Inc.
Racine, WI 53401
Jul 16, 2008 Used for rotation of crankshaft and to check engine timing and parts clearance, 6-Spline Crankshaft Wrench No. 9270 is custom designed for 2007 Harley-Davidson Sportster and 2008 Buell 6-spline engines, while 24-Spline Crankshaft Wrench No. 9280 is suited for 2006 Dyna 24-spline engines. Reversible ratcheting wrenches are heat-treated and chrome-plated and come complete with E-Z Grip handles to optimize turning power while minimizing hand fatigue.

Lowell Corp.
West Boylston, MA 01583
Jun 19, 2008 Model 151 Double Shot dedicated ratchet wrench and 151T socket ratchet wrench are available with 1½ in. fat grip that makes using tools more comfortable and secure while reducing worker fatigue. Bolt-thru design of both models lets bolts pass entirely through socket so nuts can be secured on any threaded length. Featuring fluorescent orange sockets to optimize tool visibility, ratchets feature reversing control located in head and are semi-enclosed to minimize fouling.

Stanley-Proto Industrial Tools; A Division of The Stanley Works
Conyers, GA 30013
Feb 06, 2008 Rated for torque force that exceeds ASME specifications, Round Head Ratchets come with free-spinning bearing ring and ergonomically designed thumbwheel for reversing direction. Tools are available in ¼, 3/8, and ½ in. drive sizes with standard round heads or flex-round heads that let users access fasteners from various angles. Handle lengths range from 4½ to 16 in. All ratchets have full polished double nickel chrome plating for corrosion protection.

Channellock, Inc.
Meadville, PA 16335-0519
Jan 22, 2008 Made with chrome vanadium steel for strength and corrosion resistance, 6 in. Code Blue® WideAzz(TM) Model 6WCB adjusts smoothly using precision-engineered 4-thread adjustment knurl. Tool features tapered jaw profile and short handle length for access in tight spaces, as well as long individual jaws that avoid slippage or round-off.

S-B Group
Fenton, MO 63026
Nov 09, 2007 Powered by 12 V rechargeable Ni-Cd battery, Lobster Tools Cordless Model BN-200 sets rivet nuts in No. 6, 8, and 10 sizes as well as 5/16 and 3/8 in. plus metric sizes M3, M4, M5, M6, M8, and M10. Unit includes stroke set nut, allowing operator to control how far fastener collapses, and auto reverse function that automatically engages as tool is removed from application. Suitable for offline production applications, portable tool come in molded plastic carrying case.

K-Tool International
Wixom, MI 48393
Aug 22, 2007 Designed with ergonomic soft grip, fractional and metric nut driver sets feature alloy steel sockets and shafts. Nut driver product line, constructed to perform consistently and withstand heavy-duty applications, includes hex sizes from 3/16-½ in. and 5-11 mm. Each piece is color-coded to facilitate identification, and sets are packaged in compact plastic case to provide job-to-job portability.

Cooper Hand Tools
Raleigh, NC 27612
Aug 15, 2007 Crescent® RapidSlide(TM) adjustable wrench is 10 in. long and includes handle-positioned slide adjuster that moves forward to tighten jaws and back to loosen them. Once adjusted, jaws automatically lock securely in place. Featuring all-metal drop-forged construction, device includes internal debris shield that protects slide mechanism and laser-etched SAE and metric markings that accurately show jaw opening measurement.

Stanley-Proto Industrial Tools; A Division of The Stanley Works
Conyers, GA 30013
Jul 10, 2007 Featuring 15° head sets that allow quick repositioning, open-end Engineers' Wrenches come in lengths up to 23 13/16 in., extending users' reach into hard-to-access locations. Units are available 13 metric sizes with black oxide finish. Ranging in length from 2-14 in. and offered in 11 metric sizes, Leverage Wrenches feature deep offset box heads and are used with 4 detachable handles up to 33 in. long. Applications include oil, gas, mining, shipyards, and commercial construction.

Stanley-Proto Industrial Tools; A Division of The Stanley Works
Conyers, GA 30013
Jul 05, 2007 Featuring anti-slip design open end with locking groove that prevents wrench from slipping off of any fastener, Proto® crowfoot wrenches include 71 fractional units in ¼, 3/8, and ½ in. drives and ¼-3 in. fastener sizes, and 23 metric units in ¼ and 3/8 in. drives and 7-24 mm fastener sizes. Products feature full-polish chrome finish, and suit applications in hydraulic line fittings and other hard-to-reach fasteners on aircraft automobiles and industrial machinery.

PB Swiss Tools
Gainesville, GA 30501
Jul 03, 2007 Suited for assembly and repair work, key L-wrench features elongated handle and short key part with 100° angle to facilitate access to Torx® screws in hard-to-reach situations. Special angle supplies enough free space for gripping and safe handling during normal work, and series covers entire range sizes from T4-T55. Common/frequent measurements, T6-T25, are offered in plastic holders.

Greenlee Textron, Inc.
Rockford, IL 61109
Jun 06, 2007 Made with precision-machined black phosphate tips, Screw and Nut Drivers feature slip-resistant cushion grip, and all handle ends are marked for identification of size, type, and length. Screwdrivers include heavy-duty keystone, cabinet, and Phillips tip, as well as stubby models. They come in 5- and 7-piece sets as well as 6-in-1 multi-tool. Available in 7-piece set, nut drivers range from 3/16-½ in. Square recess tip drivers range from No. 0-4 in 4-piece set or individually.

Stanley-Proto Industrial Tools; A Division of The Stanley Works
Conyers, GA 30013
May 24, 2007 Available in 39 models, Proto Spud Wrenches have conical-shaped handles ranging from 12-29 in. long that let workers align bolt, rivet, and flange holes. Protoblack(TM) black oxide finish provides non-slip grip in dirty work environments. Featuring offset heads, open end models let users quickly reposition tool during fastening, while box end versions are mostly used for final tightening and loosening of fasteners. Adjustable models fit all nuts and bolts up to 1½ in. dia.

Stanley-Proto Industrial Tools; A Division of The Stanley Works
Conyers, GA 30013
May 10, 2007 Check Nut Wrenches have short oval handle with slip-resistant grip for safety. Featuring black oxide finish, Series is available in 18 fractional and 20 metric sizes. Used on hydraulic equipment where high torque is not needed, Service Wrenches have satin finish and come in 26 fractional and 21 metric sizes. Tappet Wrenches employ double open end design; Series includes 5 fractional wrenches with 10 opening sizes and 9 metric wrenches with 18 opening sizes.

K-Tool Corp.
Wixom, MI 48393
May 04, 2007 Jumbo wrenches are made of drop forged steel and are chrome plated and heat treated to achieve maximum wear. Designed to service heavy-duty trucks, tractors, and commercial equipment wrenches are available in 4 sizes from 2 1/8 - 2½ in. KTI jumbo wrenches are laser engraved for identification and fortified with raised panels.

Ingersoll-Rand Co.
Annandale, NJ 08801
Feb 14, 2007 Featuring solid aluminum main housings, ¼ in. Model R140, 3/8 in. mini Model R145, 3/8 in. standard class Model R380, and ½ in. standard class Model R385 have variable speed triggers and onboard microprocessor-controlled protection that continuously monitors tool operation. Models R140 and R145 deliver max torque of 25 lb-ft, while Models R380 and R385 produce 70 lb-ft. Twist-to-lock battery interface eliminates damage to battery mounts and clips by locking battery securely in place.

Klein Tools, Inc.
Lincolnshire, IL 60069
Dec 07, 2006 Insulated Nut Drivers come with 6 in. full hollow shaft that allows for work on long bolt applications. Product features cushion-grip handle, 2 layers of insulation for protection against electric shock, and Tip-Ident® color codes that identify nut driver and size. Two 9-piece Nut Driver Kits are also offered, one with 6 in. and other with 3 and 4 in. full hollow shafts. They include full range of nut driver sizes and come with Cordura® nylon carrying case.