DYNACO USA, Inc.
Mundelein, IL 60060
Jun 05, 2007 SlimLine FOOD roll-up door is designed to control interior door openings for food processing, beverage, or clean room environments. Opening and closing at up to 48 in./sec, high-speed doors minimize air exchange to differences in pressure up to 0.82 psf. Door breaks away if dislodged and reinserts with push of activation button, and for safety, it features infrared photosensor system and soft bottom edge technology with self-reversing sensor.

ALECO
Muscle Shoals, AL 35661
May 25, 2007 Impervious to moisture, food stains, and chemicals, FS-250 ImpacDor® is ¼ in. ABS door with one-piece, solid core construction. Consisting of solid wood core and reinforced metal spine, ¾ in. FS-500 ImpacDor can resist palletized loads while still swinging freely in high-volume traffic. Suited for rack, push cart, and pallet jack traffic, RD-175 ImpacDor features insulated panel and full perimeter seal. Clear-Valu® ImpacDor consists of 2 clear flexible PVC panels with center overlap.

Elfab Limited
Tyne & Wear NE29 8SD  United Kingdom
May 07, 2007 Lift-Gard provides venting and rupture notification to guard against damage caused by explosions in bucket elevators transporting powder and bulk solids. Made of stainless steel, flat venting system combines integral frame and Flo-Tel(TM) detection device in one unit. If Flo-Tel(TM) detects initial explosion inside elevator shaft, it automatically switches off elevator motors to reduce risk of further explosion and stop elevator operation with open explosion vents.

DYNACO USA, Inc.
Mundelein, IL 60060
May 02, 2007 SlimLine Techno door controls small- to medium-sized interior door openings for electronics, packaging, warehousing, and processing applications. Used where safety and environment control are critical, product operates at speeds to 6 fps and features soft curtain technology to address and eliminate occurrence of lateral, downward, secondary, and entrapment accidents. Door has sealed, self re-inserting design; built-in IR photo sensor system; and self-diagnostic Dynalogix control.

Kolbe & Kolbe Millwork Co., Inc.
Wausau, WI 54401
Mar 30, 2007 Specified with aluminum interior and exterior or aluminum exterior and wood interior, Lift and Slide Door Systems feature panels that can nest behind one another or recess into pocket opening to disappear completely from view. Folding Door Systems, also available, come in 2 models with panels that fold back against each other to create clear opening. While one model hides door hinge from view for clean look when closed, other maximizes thermal performance in colder climates.

ALECO
Muscle Shoals, AL 35661
Mar 22, 2007 Max Bullet® Truck Mount Strip Door System features MaxBullet aluminum mounting bar with 2 L-brackets for installation, and Hi-Viz® fluorescent safety rings for locking strips in place. Scratch-resistant Clear-Flex II® Scratch-Guard ribbed PVC strip material hangs straight without warping, even in extreme low temperatures, and will not stick to shrink wrap or boxes. System may be used with conventional roll-up or swing doors.

TMI, LLC
Pittsburgh,, PA 15205
Mar 21, 2007 Available with 8 different surface finishes and 4 specialty options, Service-Pro Swinging Doors include 2 series of Impact Doors designed to separate customers from sights, sounds, and heat of busy kitchens. Finishes include anodized aluminum, stainless steel, wood laminates, and solid color laminates. Impact kick plates are optional.

ALECO
Muscle Shoals, AL 35661
Feb 01, 2007 Able to be custom made to end-user specifications, ImpacDors® come in varieties suited for light- to heavy-duty industrial, commercial, or institutional applications. Fully insulated and gasketed FD-175 is semi-flexible, full-thickness door with rubber sub-frame and full-height-reinforced spine. Designed to safely withstand harsh industrial environments, Magna ImpacDor features heavy-duty grey opaque lower panels and crystal clear upper portions.

Frommelt Safety Products
Dubuque, IA 52002 2654
Jan 31, 2007 Designed for pulp/paper, welding, and robotic-operated manufacturing industries, Flash-Fold recesses into sub-grade pit for forklift and crane loading access. Safety interlock switch automatically shuts down or idles potentially dangerous cutting, forming, stamping, or welding application when breached by unauthorized personnel or impacted by machinery or flying debris. Offered in sizes from 6-18 ft wide, door protects areas up to 12 ft high and cycles at 36 ips.

ALECO
Muscle Shoals, AL 35661
Jan 26, 2007 ImpacDors are rugged with standard lifetime warranted SS upper and lower hinges, and are custom made to exact size specifications. Featuring one-piece solid core construction, FS-250 ¼ in. ABS door is designed for high-volume foot traffic between kitchen and front of restaurants, and is impenetrable to moisture, food stains, and chemicals. FS-500 ¾ in. door features wood core with reinforced metal spine, and can resist palletized loads but swing freely in foot traffic.

Todco, Inc.
Upper Sandusky, OH 43351
Dec 28, 2006 Featuring high-strength steel skins bonded to moisture resistant, high-density polyethylene composite core, ArmorPlate(TM) overhead truck doors offer cargo protection as well as additional structural strength. With MagniCoat(TM) rivets to protect against rust, doors can be painted or can incorporate pre-painted coil to suit fleet color specifications.

DIRAK
Chantilly, VA 20151-1220
Nov 21, 2006 Incorporating D-SNAP technology, SNAP-LINE Bowed Handle functions as both handle and latch, eliminating need to use separate products. Spring-loaded wings are inserted into channel in handle housing. As wings retract after passing through cutout, SNAP-LINE handle is held securely in place, even in severe vibration applications. Constructed of zinc die-cast, handle can be used for right- or left-hand applications and for horizontal or vertical doors.

Marley Engineered Products
Bennettsville, SC 29512
Oct 31, 2006 Environmental Series is offered with ½ and ¾ hp motors while High Velocity series motors are 1 and 3 hp. Both electrically heated series are available factory wired for 208, 240, or 480 V 3-phase circuits with choice of 8, 12 or 16 kW per cabinet. In addition to 10 cabinet lengths and 8 stock and standard color options, units feature pre-wired control box and airflow safety sensor that disables heating elements in case blowers stop working.

Kolbe & Kolbe Millwork Co., Inc.
Wausau, WI 54401
Oct 30, 2006 Tested to meet building codes of high wind zones, K-Force® windows and doors feature impact laminated glass and specialized glazing retention system. With sound transmittance levels allowing for quiet, comfortable interior, glass also incorporates LoE2 coating to reduce solar heat gain. Products are offered in various architectural options, sizes, shapes, and configurations to suit user needs.

Hickory Hardware
Portland, TN 00000
Oct 20, 2006 Offered in stately Garrison and modern Chateau styles, Accents Hardware is available with polished brass or satin nickel finish. Units include low-profile escutcheon plates and night latches with No Lock Out feature that prevents latch from accidentally locking door. Hardware fits most wood or metal out-swinging storm doors from ¾-1 ¼ in. thick with 1 ¾ in. mounting-hole spacing. Pull handles and latches replace most standard push-button varieties.

Goff's Enterprises, Inc.
Pewaukee, WI 53072
Oct 16, 2006 Draw-Tite(TM) employs tensioning system that enables door to maintain seal under wind gusts up to 70 mph and prevents curtain from blowing out of its guides. While in-tube style, 110 V motor moves door at 6 ips, optional external motor can take door up at speeds to 36 ips. Active edge senses objects in path of lowering curtain, reversing powered door motion upon contact. Breakaway capability avoids damage due to vehicle contact, and 18 oz. vinyl door is rot-, tear-, and mildew-resistant.

TriMark Corporation
New Hampton, IA 50659
Jul 31, 2006 Designed for off-highway vehicle applications, including agricultural and construction equipment, 020-0900 Remote Inside Release provides ergonomic operation. Product is painted black and comes in 25 mm steel tubing diameters. It is also available as Inside Release sub-assembly for installation into proprietary door tube. System kits are available, comprised of handles, latches, and accessories, to provide total access solution.

Rite-Hite Corp.
Milwaukee, WI 53223
Jul 25, 2006 Made from extruded vinyl material, G-Flex Universal Door has integral support system that allows panels to withstand common bumps and fork truck impacts at loading dock. Interlocking design allows for configuring different sectional door heights, while optional Day-Lite Translucent Slats and 12, 18, or 30 in. high ventilation panels can be integrated into door to provide additional natural light and air flow. Door comes in 2 or 3 in. thicknesses and sizes up to 10 ft 2 in. x 12 ft.

Frommelt Products Corp.
Milwaukee, WI 53224 9520
Jul 18, 2006 With header set back 60-72 in. from front of opening, Roll-Top Barrier Door is designed for overhead loading of heavy parts into robotic cells and workstations via crane or forklift. Available in widths of 12 ft and heights of 12 in., door comes with category 4 safety interlocks and steel guides with rolling barrier bars. Roll-Top offers fume containment from welding process with vertical and horizontal screen protection.

Wausau Window and Wall Systems
Wausau, WI 54402
Jun 20, 2006 Offered in swing-in or swing-out versions, TD-4250i Series has 4.5 in. frame depth and is available with transom lites, kickplates, and French door astragal rails. Doors are built to withstand environmental and security challenges, meeting or exceeding testing for forced entry, air infiltration, water and condensation resistance, and structural integrity. Insulbar® barrier optimizes thermal performance, and single European-styled handle triggers multi-point locks.