Aremco Products, Inc.    Valley Cottage, NY 10989
Nov 24, 2010 Designed for applications up to 1,500°F, Quartz-Coat(TM) 845-Green helps minimize glare in halogen lamps used in automotive, dental, aircraft, stadium, and fire safety industries. Green-pigmented formulation consists of single-part, water-based, odorless inorganic system that absorbs and evenly diffuses light. Product features viscosity range of 500-1,000 cP and solids content by volume of 60.0%. Applied by dipping or pneumatic spray equipment, coating cures in 5 min at 900-1,000°F.

Michelman Inc.    Cincinnati, OH 45236
Nov 18, 2010 Designed for printing on HP Indigo WS6000 label and package digital printing press, DigiPrime 6029 produces optimal ink transfer, ink adhesion, and rub resistance on embossed and heavily textured, pressure-sensitive label stock. Forty-eight percent of active raw material in DigiPrime 6029 comes from renewable sources and product is also solvent-free, odorless, and repulpable.

Jotun Paints, Inc.    Belle Chasse, LA 70037
Nov 17, 2010 Suited for heat-sensitive substrates such as medium-density fiberboard, Era-Coat MDF products include Era-Coat MDF Primo primer and Era-Coat 32T top coat, available in 20 colors and textures. Products leave coated surface reclaimable and resistant to scratches, water, stains, and impact. Formulated without solvents, coatings do not release any VOCs and are suitable for office furniture, retail displays, flat-pack furniture, doors and countertops, kitchen cabinets, and bedroom wardrobes.

Stewart Connector    Glen Rock, PA 17327
Nov 15, 2010 Environmentally Protective Compound, EPP-918A gel offers corrosion, dirt, moisture, humidity, and chemical resistance for RJ45 and RJ11 Modular Connectors, and protects against wear from repetitive mating/unmating forces. Applied to connectors' gold-plated contacts during manufacturing, gel also includes UV tracer die for visual inspection. It is available on shielded/unshielded Stewart Connector modular devices, including those with up to 12 ports, in vertical and right-angle configurations.

Performance Coatings International    West Caldwell, NJ 07006
Nov 11, 2010 Vueguard 901 AG5-HP are UV curable coatings that optimize scratch and microbial resistance, wearability, and anti-glare properties of plastic keyboards and enclosures. Low-gloss coatings adhere to polycarbonate, PMMA, and ABS and can be applied via spray, roll, or flow coating. They are also custom formulated for textured or soft feel keyboards.

Lythic Solutions    Vancouver, WA 98663
Nov 01, 2010 Combining 2-part polymer with nano-sized colloidal silica, Lythic SPD Protector enables concrete to resist stains, acid etching, and liquid penetration. Product can be applied to almost any troweled, burnished, or polished concrete and is compatible with dyes and stains. It is rolled on with short-nap mohair paint roller and dries in about 2 hours to approximately 1 mil thickness. In laboratory testing, Lythic SPD was exposed to muriatic acid and oil for 24 hours without damage to concrete.

Birchwood Casey    Eden Prairie, MN 55344 2138
Oct 25, 2010 Utilizing immersion tank process line, LUMICLAD forms non-dimensional black oxide finish on aluminum surfaces that is electrically conductive and adherent to metal substrate. Inherent lubricity aids in break-in and resists galling. Suited for piston/cylinder assemblies, actuators, and slides, 30-min process develops uniform coating thickness of .000060 in. that will not close hole diameters or alter critical part dimensions. Slightly porous crystal structure also absorbs optional topcoat.

Master Bond, Inc.    Hackensack, NJ 07601
Oct 22, 2010 Developed for coating and lining storage tanks, piping, scrubbers, and processing equipment in chemical industry, Master Bond EP21ARHT produces bond strength greater than 2,200 psi once fully cured. Also used in electronic, electrical, and metalworking industries, product can withstand immersion in 96-98% sulfuric acid and 20% hydrochloric acid for more than 1 year. Epoxy features dielectric strength of 440 V/mil and can be thermally cycled over temperature range of -60 to +400°F.

Epoxies Etc.    Cranston, RI 02921-3407
Oct 20, 2010 Potting, encapsulating, and casting resin 20-2121 consists of 2-component, room temperature curing system that will cushion sensitive electronic components. With toxicity level that reduces employee exposure to dangerous chemicals, moisture-resistant compound imparts minimal stress on components during cure or thermal cycling. Characteristics include 2,000 psi tensile strength, 80 Shore A Hardness, and respective viscosities of 14,000 and 800 cps @ 25°C for Polyol and Isocyanate.

Carboline Co.    St. Louis, MO 63144
Oct 14, 2010 Suited for galvanized steel and other non-ferrous metals, water-based Galoseal WB creates tenacious bond, which optimizes topcoat adhesion to galvanized metal surfaces. Low VOC formula accepts 2-component solvent-containing finishes such as epoxies and urethanes. Product contains no heavy metals or mineral acids and provides dry film thickness of 0.5-1.0 mils.

PPG Industries, Inc.    Pittsburgh, PA 15238
Oct 14, 2010 Based on PPG UV-curable resins and nanotechnology, CLARITAGE(TM) Extra factory finish enhances wood floor scratch resistance and gloss retention. In standardized wear testing, topcoat remained scratch-resistant after 3,000 cycles of abrasive scrubbing. Formula also exhibits clarity to highlight natural wood grain patterns.

PPG Industries, Inc.    Pittsburgh, PA 15238
Oct 14, 2010 Qualified for US Navy vessels and other federal marine coatings applications, PSX 700SG semi-gloss epoxy polysiloxane coating has low-VOC formulation and unique surface tension that minimizes rust or dirt streaking. It is approved on US Navy Qualified Product List for topside and freeboard applications and also meets US Navy Federal Standard Color standards for Haze Gray. Abrasion-resistant, color-stable low solar-absorbing coating also exhibits unlimited recoatability.

Bunting Magnetics Company    Newton, KS 67114 0468
Sep 30, 2010 Providing clear, non-stick finish that will not flake off, Repel(TM) Coating offers silicone-based layer of protection for many different applications. Product keeps die flexible and prevents adhesive or label material from embedding in cavities. Coating is also suitable for cold foil applications where it minimizes likelihood that thin foil material will stick in base of die.

Birchwood Casey    Eden Prairie, MN 55344 2138
Sep 15, 2010 Designed for aluminum components, LUMICLAD® develops coating thickness of .000060 in. with smooth, clean surface that is electrically conductive. Satin black finish has uniform thickness that will not close down hole diameters or change critical part dimensions. Inherent lubricity makes LUMICLAD suitable for sliding contacts, such as piston/cylinder assemblies. With slightly porous crystal structure, finish absorbs optional topcoat, such as clear polymer, light oil, or dry-to-touch sealant.

Durex Industries    Cary, IL 60013 2979
Sep 10, 2010 Bonded directly to cartridge heater sheath, Duraslik(TM) Coating acts as corrosion inhibitor and solid lubricant when heater is inserted into drilled hole and energized. Product allows heater to be removed with relative ease after long-term use, provides optimal heat transfer characteristics, and eliminates need for secondary release agents prior to insertion.

Tennant Co.    Mississauga, ON L5S1R2
Sep 10, 2010 Combining proprietary scrubbers and Diamabrush tools, Finished Concrete Systems enhance image of facility while making floor easier to clean and maintain. Polished Concrete process hones concrete surfaces to progressively smoother, shinier, and brighter finish using diamond grit tools. With Easy-Prep, abrasive diamond grit tools can prepare concrete floors for Tennant floor coatings. Aggressive Scrub allows tools to remove heavy to severe soil compacted into concrete surface.

Daimer Industries Inc    Woburn, MA 01801
Sep 07, 2010 Using ingredients composed of soy-based compounds, Eco-Green® Grout Sealers preserve grout joints and repel stains and dirt in heavy traffic environments. Products add hard, protective coating to sanded grout lines found in exterior or interior tiling. Scientifically tested and designed to biodegrade rapidly and completely, often in 1 month's time, sealers are suitable for tiled ceiling, floors, walls, and counters in restaurant, janitorial, and food processing industries.

APV Engineered Coatings    Akron, OH 44301
Aug 24, 2010 Used as first coat in conjunction with NeverFade(TM) exterior paints, water-based NeverFade(TM) Universal Primer adheres to wide variety of substrates, including wood, stucco, aluminum siding, vinyl siding, masonry, and cement panels. White primer can be applied to prepared surfaces with brush, roller, or spray gun and requires just 24 hours of drying time. Together, both products provide environmentally friendly system for both residential and commercial projects.

Linetec    Wausau, WI 54402
Aug 12, 2010 Using water-based TRINAR® Aqua air dry system, Linetec provides on-site repair and restoration of architectural aluminum products' finishes. Application of fluoropolymer finish meets weathering requirements of AAMA 2605, resisting humidity, color change, chalk, gloss loss, and natural weathering. Coating also meets interior specifications for Green Seal® Standard and U.S. Green Building Council's LEED® Green Building Rating System(TM), offering low VOC content.

Solutia, Inc.    Saint Louis, MO 63166
Aug 11, 2010 IEC-certified, RoHS-approved, and UL-recognized, Saflex® PS41 PVB prevents corrosion in solar cells while also inhibiting discoloration. Product is specifically suited for protecting against metal migration and maintaining original aesthetics of solar modules in building integrated photovoltaics (BIPV) applications. Formula prevents electromigration when in contact with metals such as silver, nickel, and vanadium, which typically lead to discoloration.