Henkel Loctite Corporation    Rocky Hill, CT 06067
Feb 14, 2002 Loctite® 5970 cured-in-place, silicone gasketing material has fluid resistant formulation that is suitable for flange sealing applications with excessive joint movement. This black, single-component, alkoxy RTV silicone paste is resistant to liquid coolants, oil, and other automotive engine fluids. Non-slumping and non-corrosive, Loctite 5970 low odor, low volatility material does not contain MEKO (methylethylketoxime).

Tra-Con, Inc.    Bedford, MA 01730
Feb 04, 2002 15C, 15D, and WCC2B one-part, UV fiber-coating materials are suitable for application to optical fiber. Adhesives can be supplied for miles or millimeters of cable. Adhesives protect cable behind fiber-optic devices and limit process time.

Cornell Rolling Door Specialists    Mountaintop, PA 18707
Jan 29, 2002 SpectraShield powder coating finish is applied to components of rolling doors and rolling counter doors. It provides color retention, UV stability, and resistance to corrosion, chemicals and abrasion. Its total palette consists of more than 200 colors. SpectraShield gray powder coating is used on all of company's exposed steel door surfaces including guides, bottom bar, and endplate brackets.

Stahlin Enclosures    Belding, MI 48809
Jan 28, 2002 SolarGuard(TM) SMC formulation retains gloss and color after exposure to concentrated UV light. It meets NFPA No. 101 Class A flame spread index, UL 94 VO, and passes UL 94 5V for fire retardancy. SolarGuard non-haloginated system contains no bromine and no antimony, and is able to reduce effects of UV degradation such as surface roughening and fiber blooming. Second layer of protection is sacrificial additive that acts as UV absorber.

Aremco Products, Inc.    Valley Cottage, NY 10989
Jan 11, 2002 Corr-Paintâ„¢ coatings are designed for use from 200° to 2500° F. CP20XX Series epoxy and urethane based coatings produce corrosion and wear resistant barriers to 500°F. CP30XX inorganic-ceramic, aqueous-based coatings resist thermal shock and oxidation to 1500°F. CP40XX silicone-based coatings are formulated using VOC-compliant, water-dispersible silicon resin. CP5000 2-part, water-based, inorganic, zinc-rich primer resists immersion, impact, and abrasion.

Dymax Corp.    Torrington, CT 06790
Jan 08, 2002 Formulated to cure rapidly, epoxies produce slick, smooth, dry surfaces that provide bonding, sealing and protective coatings in seconds, and reach full strength in 1-24 hr. Cured epoxy bonds exhibit low shrinkage and outgassing properties and offer good solvent and temperature resistance. They adhere to glass, metal and wide variety of plastics. Surface treatment provides adhesion to some difficult to bond plastic substrates.

Krylon Diversified Brands    Cleveland, OH 44115
Jan 02, 2002 Industrial Rust Tough aerosol paint provides complete coverage with 1 coat on new or clean metal, making it suitable for small touch-up jobs, painting irregular shapes, or covering hard-to-reach areas. It can be used on indoor and outdoor equipment. Paint provides high-gloss finish that resists chipping and peeling, dries to touch in 25 min, and can be handled within one hr. It is available in 26 industrial colors, including OSHA safety colors.

Birchwood Casey    Eden Prairie, MN 55344 2138
Dec 27, 2001 BC40 TRU TEMPâ„¢ produces high-quality black-oxide finish on iron and steel components in 10 to 15 min. Non-polluting system produces satin, true-black magnetite finish of 0.000020 in. thickness. Compact, 7-tank system eliminates severe splattering and boil-over hazards. Process is suitable for dimensionally-critical parts, including power drive components, gears, and machine parts, and meets MIL-C-13924C Class 1 specification.

Magnetic Component Engineering, Inc.    Torrance, CA 90505
Dec 21, 2001 PR1010 black phenolic resin resists chemicals and retards oxidation. It can be used as final coat on metal components, or as primer on metal prior to bonding. It promotes bond longevity by inhibiting oxidation at bond joints. Application process involves lightly grit-blasting surface with aluminum oxide, then spray coating. Process eliminates need for phosphoric acid etch. Coating thickness is typically applied 0.0005 in. ± .0002 in.

Cortec Corp.    St. Paul, MN 55110
Dec 11, 2001 Eco-Line(TM)Long Term Rust Preventive provides universal protection for all metals for up to 1 year. It has a neutral smell, and does not require workers to wear special safety equipment for use. Formulation is VOC free and biodegradable. It combines VpCI technology with film-forming additives. Anti-corrosion chemistry provides protection in atmospheres with high humidity and aggressive chloride attack. Eco-Line is applied by spray, dip, or brush.

GEMCO Enterprises    Shawnee, OK 74802-1254
Dec 11, 2001 RustBustR(tm) Rust Inhibiting System utilizes cathodic protection to protect metals from premature oxidation. Its 2 x 3 in. brick combines zinc alloy with strong magnet, and is attached inside frames/panels of vehicles by electrically conductive adhesive. No outside electrical source or training is needed for installation. RustBustR stores electrons, and supplies them to other metals in vehicles.

Birchwood Casey    Eden Prairie, MN 55344 2138
Nov 21, 2001 Produced with concentrates, color and antique finishes can be produced without hazardous effluent on parts made of die-cast materials, copper, brass, bronze, nickel, silver, pewter, zinc, and aluminum. Suitable for large- and small- volume tank lines, finishing processes are safe and easy to use in manual or fully automatic modes. Finish comes in Antique Black, Antique Brown, Aluma Black and Zinc Black.

Tra-Con, Inc.    Bedford, MA 01730
Nov 15, 2001 Type 15C is clear, Shore A, UV-curable coating material suitable for laminating nameplates, badges and labels, coating plastic parts, bonding applications for liquid crystal displays, and other optical end-products. It exhibits low shrinkage during cure and durability thereafter. Type 15D is similar, but is more viscous, has Shore D hardness, and has higher glass transition temperature. It also offers low shrinkage and durability.

Microplasmic Corporation    Peabody, MA 01960-1704
Nov 08, 2001 Microplasmic Process creates thick ceramic coating that resists wear, heat and aqueous corrosion, and is an electrical insulator. Light aluminum, magnesium, titanium or other alloy parts that are coated with process can replace heavier steel or composite materials. Other reactive metals, such as zirconium, vanadium and tantalum, can also be coated. Any coating thickness can be achieved with aluminum, magnesium, titanium and zirconium alloys.

Rust-Oleum Corp.    Vernon Hills, IL 60061
Nov 06, 2001 Six colors and 1 green primer are included in Industrial Choiceâ„¢ Multi-Purpose Spray Paint line. Colors include machinery blue gray, machine green, sun yellow, machinery gray, shadow gray, dusty pink, and green primer. 35 additional colors are also available that include OSHA safety colors, fluorescents, zinc-rich cold-galvanizing compound and primers. Paints are formulated specifically for indoor or outdoor industrial applications.

Revere Products    Cleveland, OH 44135 0311
Nov 05, 2001 Acoustical Ceiling Tile Restorer completely masks stains and discoloring of age without sealing tile or affecting sound absorption. Aerosol spray clay formula renews tile, eliminating custom-cutting of new tiles for vents, sprinklers or partials. Spray is available in white or off-white.