Industrial Nanotech, Inc.
Naples, FL 34108
Jul 01, 2005 Water-based Nansulate™ High Heat provides insulation protection from temperatures ranging from -40 to +400°F while offering corrosion protection to underlying substrate. Applications include oil refineries, food-processing plants, and steam pipes and boilers in any industrial environment.

Industrial Nanotech, Inc.
Naples, FL 34108
Jul 01, 2005 Nansulate™ Translucent GP and PT can be applied with roller, paintbrush, or airless sprayer at low pressure, and can be painted over with water-based paint. Coatings do not lose their insulation value due to moisture, mold, or dust. Translucent color enables visual inspection of substrate, which is critical for equipment inspections required in many industries. Applications include maritime, petroleum refinery, and shipbuilding industries.

Master Bond, Inc.
Hackensack, NJ 07601
Jun 29, 2005 Single-component UV19LV bonds and seals clear films and sheets to other films, paper, and foil substrates. Uninhibited by air, 100% reactive, acrylic-based polymer composition does not emit any VOCs during cure. Mobile liquid has viscosity under 300 cps @ 75°F and cures in 10–15 sec using UV cure equipment in 365 nm range. With operating temperature range of -60 to +250°F, cured material features tensile strength over 800 psi and elongation over 80%.

GE Advanced Materials
Wilton, CT 06897
Jun 27, 2005 Cycoloy Engineered Filler Resin provides sparkle effect while helping to eliminate flow lines. Based on flame-retardant Cycoloy resin matrix, halogen-free product features UL94 VO and 5 Va ratings, as well as deflection temperature of 85°C. Resin offers range of surface finishes, from rough to silky and matte to glossy. Metallic effect is suited for electronic devices, personal care products, small appliances, and telecommunications devices.

Thermal Ceramics, Inc.
Augusta, GA 30903
Jun 24, 2005 With operating temperatures of 2,000 or 2,400°F, fiber-based Kaofil® grades feature smooth consistency and workability. Pumpable products are installed with piston and diaphragm pumping equipment and are suited for hot spot repair in utility boilers, HRSG units, and blast furnace stoves. Moldable grades are suited for repair or joint filling applications in ferrous, non-ferrous, and commercial markets. Both come in 1 and 5 gal pails as well as 11¾ and 40 oz tube cartridges.

Gluefast Co., Inc.
Neptune, NJ 07753
Jun 23, 2005 Water-based Craquelure/Texture Coating adds dimension when applied on top of poster or 4-color lithographed print. Applied using brush or paintbrush roller, texture is added to make print look hand-painted. When using different applicator, print looks like it was painted on canvas. Available in matte, semi-gloss, and glossy finishes, coating comes in quarts, gallons, 5-gal pails, and 55-gal drums.

NYLOK Corp.
Macomb, MI 48042 4007
Jun 22, 2005 Applied to threaded fasteners with 100% Teflon® powder, NYCOTE® coating provides protection against thread contamination from electrodeposited paints, primers, and adhesion of weld spatter. Non-conductive powder coats only external and internal threads. In addition to eliminating masking, plugging, or capping of threads, NYCOTE also eliminates need for slave bolts and re-tapping. It adds lubricity to fasteners and minimizes torque vs. tension scatter.

John Deere Harvester Works / Cylinder Division
Moline, IL 61265
Jun 21, 2005 Intended for dozer undercarriages, SC-2 coating combines wear-resistant and corrosion-resistant properties. Extended-Life Undercarriage, featuring coated bushings uses GOPALITE™ process, which produces water-based slurry from heavy alloy-metal powder and several organic additives. Slurry formula suspends alloy powder and is used to apply coating to part surface, producing coating that is uniform in thickness and consistency.

Cortec Corp.
St. Paul, MN 55110
Jun 15, 2005 VpCI™ 374 Waterborne Metal Primer is formulated as fast drying, thixotropic coating with low viscosity that resists sagging. Built-in VpCI™ Anti-Corrosion System provides protection against corrosion, sunlight, and weather for carbon steel, cast iron, stainless steel, and aluminum. Designed for production base coating using conventional spray or airless spray, product can also be applied by brush or roller for touch-up and field use.

Garon Products, Inc.
Wall, NJ 07719 1924
Jun 14, 2005 Resistant to abrasion and scuffing, multi-purpose Grip-Coat™ provides protection for multi-use exterior surfaces. Colored coating provides surfaces with traction to prevent skidding in stop-and-go traffic areas and also seals, preserves, and adds anti-glare visibility. Ready for use in 24 hr, coating is suited for heliports, Med-Vac arrival and departure points, highway medial strips, traffic islands, tennis or basketball courts, and playgrounds.

Rhino Hide LLC
Eaton Park, FL 33840
Jun 09, 2005 Dual-component, water-based Prime-A-Seal IV 4350™ cures, seals, and primes concrete in one application. It maintains freshly poured slab's water content throughout curing process, allowing concrete to reach full strength. Promoting hydration, primer minimizes shrinkage cracking as concrete dries. Chemical-resistant primer protects surface against water, oil, salts, and other contaminants, while matte finish acts as stand-alone finish sealer.

Sherwin-Williams Co.
Cleveland, OH 44115
Jun 08, 2005 HYDROGLOSS™ Single-Component Urethane Coating is formulated to provide high-gloss finish with interior and exterior color and gloss retention. It is ready to brush, roll, or spray without adding and mixing additional components. With VOC content of 250 g/l, low odor formulation is recommended for water tanks, power plants, amusement parks, bridge and highway construction, and for corporate logos and petrochemical plants.

GE Advanced Materials
Wilton, CT 06897
Jun 03, 2005 Suited for direct gravure, offset gravure, and flexo coating techniques, low-viscosity UV9200 Epoxysilicone permits even deposition. Non-volatile product facilitates manufacture of release films, where flowout performance delivers optimal coverage with low coat weight. Cationic system co-cures with GE's family of UV9200 grades without migration, and blends with other GE UV-release grades to reduce viscosity without non-silicone reactive diluents.

Reverso Pumps Inc.
Fort Lauderdale, FL 33315
Jun 03, 2005 Fuel Primer FP-301 pumps diesel fuel from tank through fuel lines, pushing air from main feeding line, primary filters, secondary filters, and engine. Measuring 9 5/8 x 10 5/8 x 4 7/8 in., primer includes integrated pressure relief valves to protect fuel system components. It is suited for bleeding lines when air enters system during filter replacement or when engine runs out of fuel. Under extreme conditions, primer can also pump fuel through clogged filters.

Birchwood Casey
Eden Prairie, MN 55344 2138
Jun 02, 2005 TRU TEMP® produces non-dimensional black oxide finish, directly over light heat treat scale, on all types of fasteners and other bulk-handled parts. Since it operates at 200°F, it avoids severe splattering and boilover hazards of conventional hot oxide tanks. Solutions used in process line prevent formation of red coatings and white salt leaching. Process contains no EPA regulated chemicals and meets military specification MIL-DTL-13924 Class 1, and AMS 2485.

Elscint Automation
Pune 411026  India
May 27, 2005 Sprayable ElscintPUL, used with stainless steel, mild steel, or cast aluminum bowls, can be formulated to provide smooth or rough texture. Smooth formulation reduces noise level by eliminating metal to metal contact, and rough formulation increases friction for oily components to reduce friction between components and bowl track. Offered in thicknesses from 0.40–2 mm and above, green polyurethane lining is US FDA approved.

White Electronic Designs Corp. / Display Systems Division
Hillsboro, OR 97124
May 24, 2005 Max-Vu™ provides means of optimizing contrast and viewability of Active-Matrix Liquid Crystal Displays (AMLCDs), while also offering protection from harsh environmental conditions. Glass lamination process includes optically matched window bonded directly to AMLCD using silicone. With window optically coupled to display, product is suited for applications such as outdoor navigation, GPS systems, and embedded control systems.

Devcon
Danvers, MA 01923
May 19, 2005 Safety Clear Coat™ seals and protects glass, metal, ceramics, wood, phenolics, composites, fabrics, and concrete against impact and wear. Self-leveling, UV-stable product is water-clear, maintains clarity over time, provides tensile elongation of 150%, and has no VOC emissions. Epoxy formulation features mixed viscosity of 3,500 cps, working time of 30–40 min, and functional cure time of 8–10 hr. After 24 hr, adhesive provides hardness of 55 Shore D.

Aremco Products, Inc.
Valley Cottage, NY 10989
May 17, 2005 Pyro-Paint™ 634-AL provides 2-part, 99% alumina filled, ceramic coating system used to bond, coat, and seal refractory fiber boards and other shapes. Material helps prevent wear and oxidation of refractory components and increases heat reflectivity. Resistant to wetting by most molten metals, product has solids content of 76.8% by weight, 66.0% by volume, and viscosity range of 5,000–6,000 cps. Water-based formulation has no VOCs and dries within 2 hr at 200°F.

Master Bond, Inc.
Hackensack, NJ 07601
May 06, 2005 Flexible, optically clear UV19 cures upon exposure to UV light at ambient temperatures. Compound is 100% reactive, does not contain any volatiles, and offers abrasion resistance and heat stability. With tensile strength in excess of 800 psi and viscosity of less than 300 cps at 75°F, compound is suited for laminating, sealing, and bonding to substrates with different thermal expansion coefficients.