PerkinElmer, Inc.
NORFOLK, MA 02181
Jun 09, 2009 Combining dynamic counting range of 1 cps to 1 Gcps in single operating mode and low-noise performance, Gigahertz Photon Detection Module (GPDM) is designed for analytical and clinical diagnostic applications under low-light level conditions. Its dynamic range and SNR enable OEMs to perform fluorescence and luminescence measurements with one detection system.

Cal Sensors, Inc.
Santa Rosa, CA 95403
Apr 13, 2009 Able to operate at rated maximum foil temperature of 1,000°K for wavelengths of 2.9 microns and beyond, PIRELC can be used as steady state or pulsed source of blackbody radiation for near-to-far IR applications. Solid state emitter outputs 4x10-2 W/cm² at 1 in. from filament, while pulsable emitter offers optimized signal-to-noise ratio, is compatible with various detector technologies, and comes in T0-5 header package. Emitter can be pulsed to 10 Hz with 50% modulation depth.

CIP Technologies
Ipswich   United Kingdom
Apr 03, 2009 Offering data rates of 40-100 Gbps, 100GXN-2R2-ORP optical regenerator offers dual-channel building block for configuring optical networking systems. It measures 3.5 x 1.2 x 0.4 in. and includes planar single-mode waveguides with splitter/combiner elements, configured to create balanced MZI, and monolithically integrated array of 4 nonlinear SOA-XNs. Device can perform wavelength conversion and optical logic functions.

Edmund Optics
Barrington, NJ 08007
Feb 02, 2009 Designed to create surface that diffusely reflects light back, Diffuse Reflectance Grid Distortion Targets allow user to avoid glare across image surface. Units feature chrome pattern on substrate and produce no glare with either on- or off-axis lighting sources. They are available in 2 x 2 in. configuration with dot sizes of 0.0625, 0.15, or 0.25 mm, as well as 3 x 3 in. configuration in dot sizes of 0.125, 0.25, and 0.5 mm.

Zygo Corp.
Middlefield, CT 06455
Sep 30, 2008 UltraSphere (λ/50) is designed to enable surface form metrology with uncertainty in RMS of less than or equal to 3.2 nm (λ/200 at 633 nm) when used with Zygo laser Fizeau interferometer systems. Suited for metrology of test optics with greater than 40% reflectivity, this uncoated transmission sphere is available in 4 in. aperture size with f/numbers of f/0.75, f/1.5, and f/3.3.

Gigamon Systems
Milpitas, CA 95035
Sep 19, 2008 Available as accessory for GigaVUE® 420 Data Access Switch, 10GigaTAP optimizes network monitoring resources and data integrity. When installed at back of switch, unit splits and copies inbound and outbound optical data streams, then forwards replicant data to network monitoring tools at 1 or 10 Gbps. Device comes in SR-LC/Multimode for short reaches of 850 nm cables, LR-LC/Singlemode for long reaches of 1,310 nm, and ER-LC/Singlemode for extra-long reaches using 1,550 nm.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Jul 10, 2008 Supporting data transmission rates up to 16 Mbit/sec, Models TSHG5210 and TSHG6210 come with ±10° viewing angle and offer radiant intensity of 230 mW/sr at 100 mA, while TSHG5410 and TSHG6x10 with ±18° viewing angle offer 90 mW/sr at 100 mA. Available in leaded 5-mm packages, 850 nm emitters provide 55 mW optical power at 100 mA. All models are Pb-free in accordance with WEEE 2002/96/EC and RoHS 2002/95/EC.

ARRIS
Suwanee,, GA 30024
Jul 02, 2008 ARRIS optical passives are ergonomically designed in OM4100 node fiber tray and field splice enclosure packages within 1 GHz CHP CORWave system, and allow for plug/play features in multiple wavelength systems. Facilitating quick segmentation which eliminate need for fiber construction, units can be installed without specialized equipment, fusion splices, or complex fiber routings in field. They offer high isolation and low insertion loss over operating temperature range.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
May 07, 2008 Model TSFF5510 870 nm emitter offers forward voltage of 1.45 V at 100 mA and 2.15 V at 1 A for uniform operation. It has switching times of 15 ns, supporting data transmission rates of up to 16 Mbps, as well as 55 mW optical power at 100 mA and radiant intensity of 32 mW/sr at 100 mA. Compact package has lens radius of 2.35 mm, lens height of 3.8 mm, lens width of 4.8 mm, epoxy bottom plane diameter of 5.9 mm, and lead distance of 2.54 mm. Unit is also lead-free.

CEVA, Inc.
San Jose, CA 95110-3710
Apr 23, 2008 While CEVA XS-1100A is optimized for wireless baseband applications, and CEVA XS-1200A is aimed at multimedia and other applications requiring high-performance signal processing, both configurable hardware platforms offer verified approach for integrating CEVA-X DSP cores into complex system on chips (SoCs). Use of industry-standard system buses enables designers to add their own hardware blocks or connect DSP to other systems present on chip.

Rochester Precision Optics
Rochester, NY 14586
Mar 03, 2008 Optir(TM) moldable long wave infrared glass and infrared aspheric optics utilize benefits of moldable infrared chalcogenide glasses. Glass offers minimal thermal change in refractive index of 72 x 10^-6/ºC, which benefits systems designers in avoiding thermal defocusing.

Meddius, LLC
Charlottesville, VA 22902
Feb 27, 2008 Able to process over 5.5 million HL7 messages/hr, Integration Router(TM) provides data transformation, communication, and routing functions between clinical healthcare applications. Core engine provides transport mediation and message transformation between disparate formats, allowing hospitals to integrate data residing in separate applications without new software infrastructure. Rack-mountable and scalable solution offers turnkey functionality.

ThorLabs
Newton, NJ 07860
Jan 25, 2008 Offered as turnkey solution, Adaptive Optics (AO) Toolkit allows researchers to integrate adaptive optics into their research systems within hours. Kit is comprised of Thorlab WFS150C Shack-Hartmann Wavefront Sensor, with 1.3-megapixel CCD camera; BMC 140 actuator Multi-DM deformable mirror system; and software that minimizes wavefront distortion. Control software also lets user monitor wavefront corrections and intensity distribution in real time.

Meller Optics, Inc.
Providence, RI 02940
Nov 19, 2007 Optimized for use at 10.6 µm, CO2 Lenses and Mirrors meet OEM and ISO-10110 specifications for optical elements and are compatible with low-power CO2 lasers used for cutting, marking, and de-gating plastics. CO2 Lenses are A/R coated and available in ½ to 1½ in. dia sizes with focal lengths from 1-25 in. in ½ in. increments; dual-band coatings are offered to aid in system alignment. Made from silicon, molybdenum, and copper, CO2 Laser Mirrors and reflectors are ½-10 mm thick.

Optek Technology, Inc.
Carrollton, TX 75006-6905
Nov 06, 2007 Available with axial, gull wing, or right angle lead configurations, Series OPB609 sensors consist of 940 nm infrared LED that has maximum forward voltage of 1.7 V and reverse dc voltage of 5 V and NPN silicon phototransistor mounted side-by-side on parallel axes. Units feature 50 mA forward dc current with maximum reverse current of 10 µA and peak forward current of 1 A, 75 mW power dissipation rating, and -25 to +85°C operating temperature range.

Bookham, Inc.
San Jose, CA 95134
Sep 13, 2007 Incorporating buried hetrostructure laser, 2.5 Gbps transmit optical subassembly (TOSA) has transmission capability of 125 Mbps to 5.3 Gbps over 1,600-6,000 ps/nm dispersion, with extinction ratio of greater than 10 dB. At OC48 data rate, it has reach of up to 360 km in C band and 200 km in L band. Product is designed as in-feed to TDM, CWDM, and DWDM SFP markets and can also be used to replace 14-pin butterfly direct modulated lasers on card applications.

Photonic Products, Ltd.
Huntington Beach, CA 92647
Sep 04, 2007 Pocket sized FFD100 Fibre Fault Detector visually finds discontinuities that result in signal loss, and aids end-to-end fiber identification within bundle. It uses high visibility 635 nm red laser diode with CW operation to locate faults up to 5 km. Measuring 162 mm and weighing 70 g, unit features Universal Adaptor and accepts all standard 2.5 mm optical connector types for single and multimode operation.

Carl Zeiss Microimaging, Inc.
Thornwood, NY 10594-1939
Feb 06, 2007 Offering respective resolutions of 1,392 x 1,040 and 2,028 x 1,540 pixels, 1.4 megapixel AxioCam ICc1 and 3.3 megapixel AxioCam ICc3 are suited for users who work with laboratory and routine microscopes or simple stereomicroscopes. Both cube-shaped cameras have edge length of 4 cm and offer variety of exposure times. Operating on power supplied via FireWire data cable, AxioCam ICc1 captures up to 17 images/sec and AxioCam ICc3 captures 6-39 images/sec.

PerkinElmer, Inc., Optoelectronics Headquarters
Fremont, CA 94538-3180
Dec 19, 2006 Available in narrow and wide beam configurations, Model VIGI-Lux(TM) 5770 features Xenon flashlamp that covers full light spectrum from UV through visible to IR. Modular architecture offers flexibility in configuring end products, while IR long-pass filter removes wavelengths under 780 nm, making strobe invisible to naked eye. Illuminator is suited for license plate recognition, infrared surveillance, and machine vision applications.

Opto Technology Inc.
Wheeling, IL 60090 6056
Nov 13, 2006 Suited for applications requiring full, UV to Red spectrum, OTLA-0130 broadband white LED light engine integrates white LED with monochromatic LED die to expand spectral output. Light emitting source of less than 2 mm dia in size allows it to be coupled to optical systems such as fiber optics and focusing optics. Each LED wavelength, including white, 395, 470, 630, and 660 nm, can be individually addressed for separate pulsing and intensity balancing.