Spindles

Mechanical Power Transmission

Front Steer Axle is designed to reduce weight not performance.

March 3, 2016

Available in standard and wide track versions with 12,000&ndash;13,200 lb gross axle weight rating (GAWR), Meritor® Front Steer axle&trade; (MFS+) features gooseneck beam design and offset knuckle with integrated torque plate and tie-rod arms that lend to reduced weight design. Low-profile, which reduces space constraints to foster technician access, also simplifies integration into chassis. Along with high-angle turning capacity up to 55°, axle offers universal compatibility with braking systems.<br /> Read More

Mechanical Power Transmission, Transportation Industry Products

King Pin Kit minimizes front axle repair time.

February 1, 2016

Offering quick solution for aftermarket king pin replacement, FastSet&trade; King Pin Kit eliminates need for reamers, special tools, and presses. King pin bushings do not need to be reamed after they are installed into steering knuckle. Instead of pressing in bushings during installation, customers can use kit to install spiral bushings by hand. In addition, king pin&#39;s special groove pattern design allows grease to permeate high-wear areas. Read More

Mechanical Power Transmission

Suhner Flexible Shafts

December 14, 2015

Handle speeds up to 50,000 rpm with high accuracy; from printing presses and remote control valve control to speedometers and power seat actuation Need an easy and quick way to transmit rotary motion from a power source –motor or hand wheel – to where you need the movement? Maybe around a corner? Compensating for some offset? Allowing relative movement between the two components? Reaching... Read More

Mechanical Power Transmission

Bolt-In Front Axle enhances Wrangler off-road performance.

November 10, 2015

Offered as direct-fit front axle upgrade for Jeep® Wrangler, The Ultimate Dana 44&trade; features Spicer® nickel chromoly axle shafts and SPL® 1350 u-joints with triple lip seals and full-circle clips. Axle tube thickness of 5/16 in. promotes strength, rigidity, and durability, and brackets with ¼ in. steel resist bending. Other features include selectable locking electronic differentials and spicer gearing with multiple gear ratio options: 3.73, 4.10, 4.56, 4.88, 5.13, and 5.38. Read More

Fasteners & Hardware, Fluid & Gas Flow Equipment, Mechanical Power Transmission

Seginus Inc. is Pleased to Introduce 9920-020000-01EH and 9135- 000000-05AEH Sealing Shaft and Plunger Assemblies

October 26, 2015

The Sealing shaft and Plunger are both used in water valve assemblies manufactured by AOA Luftfartgeräte Gauteng of Germany. The water valves are solenoid operated valves which control the water supply to the toilet assembly spray ring. Seginus Inc. has released the following FAA PMA replacement parts to aid in your cost reduction programs when maintaining your Water Valve Assemblies ... Read More

Mechanical Power Transmission

Seginus Inc. is Pleased to Introduce the EH6608321-1 Spline Adapter

October 22, 2015

The EH6608321-1 Spline Adapter is eligible for installation on Learjet Aircraft. The Spline Adapter is eligible for installation with DC Generator Assembly 30B107-11-A or 30 to the TFE731-3 Engine. Model Eligibility: Learjet: 35, 36, and 55 For more specific model eligibility details, please see the supplements section of our website. For sales information please contact your regional... Read More

Mechanical Power Transmission

Oerlikon's Drive Systems Segment Underline Investment in China Bus Market

June 3, 2015

High-tech solutions for low floor city buses at Bustec 2015 in Shanghai Shanghai (China) – Oerlikon’s Drive Systems Segment, with its brand Oerlikon Graziano, will participate to Bustec 2015, the China International Bus Technology Exhibition, in Shanghai from May 27-29, at SNIEC, Hall E1 – Booth 2081. The participation to BUSTEC is an important joint activity with the Chinese partner... Read More

Mechanical Power Transmission

Dana to Launch New Range of Spicer® Axles for Rough Terrain Cranes, Forklift Trucks in China

April 27, 2015

PARIS,  -- Today, Dana Holding Corporation (NYSE: DAN) announced that the company will take advantage of its advanced engineering resources, world-class supply chain, and quality-driven manufacturing capabilities in China to develop a new series of Spicer(®) axles for rough terrain cranes and an axle specially designed for forklift trucks and other medium-sized material-handling equipment. ... Read More

Mechanical Power Transmission

Meritor® Earns Top 20 Product Award from Heavy Duty Trucking Magazine for P600 Series Heavy-Haul Planetary Axles

February 24, 2015

TROY, Mich. – Meritor, Inc. (NYSE: MTOR) earned Heavy Duty Trucking (HDT) magazine's 2015 Top 20 Product Award for its P600 Series Heavy-Haul Planetary Axles. The award honors the most innovative and significant new products that address industry issues and help fleets improve their bottom line, according to Deborah Lockridge, HDT editor. The P600 Series axles, including the P610 and... Read More

Mechanical Power Transmission

Meritor® Offers MTec6(TM), Industry's Lightest Trailer Axle, at Technology Maintenance Council

February 20, 2015

NASHVILLE, Tenn. - Meritor, Inc. (NYSE: MTOR) is announcing the MTec6™, the industry's lightest trailer axle that offers greater weight savings and lower total cost of ownership. The six-inch, large-diameter axle will be showcased at the Technology Maintenance Council (TMC) 2015 Annual Meeting Transportation Technology Exhibition from Feb. 16 through Feb. 19. "We applied Meritor's... Read More

Lubricants, Mechanical Components & Assemblies, Mechanical Power Transmission, Software, Green & Clean

Dana Features Innovations Designed to Improve Fuel Efficiency, Optimize Performance at Technology & Maintenance Council's 2015 Annual Meeting

February 20, 2015

NASHVILLE, Tenn. – This week at the Technology Maintenance Council's 2015 Annual Meeting, Dana Holding Corporation (NYSE: DAN) will exhibit a range of products optimized for engine downspeeding, along with additional drivetrain technologies aimed at increasing efficiency and fuel economy.  With a focus on decreasing the total ownership costs of line-haul trucks and other heavy-duty,... Read More

Mechanical Power Transmission

Rear Axle helps increases fuel economy with downspeeding ability.

February 20, 2015

With ratios of 2.31 and 2.47, FUELite+&trade; 6x2 rear axle features laser welded design that reduces weight and improves durability of components. Suspension fit design, compatible with T-type and industry-standard yokes, offers gross combination weight ratings up to 140,000 lb and has DualTrac&trade; housing that supports single or dual tires. Driver-controlled differential lock maximizes traction in unfavorable driving conditions; automatic differential lock at higher speeds is also available. Read More

Machinery & Machining Tools, Mechanical Power Transmission

Mazak to Spotlight Single Setup Part Production at PMTS 2015

February 12, 2015

Attendees will discover how to boost capacity via Multi-Tasking technology and automation FLORENCE, Ky. – At PMTS 2015, taking place April 21 – 23 in Columbus, Ohio, Mazak will showcase the high levels of accuracy and productivity that shops can achieve with its advanced Multi-Tasking technology. In booth 253, the company will feature its new QUICK TURN UNIVERSAL (QTU) 250MSY and... Read More

Mechanical Power Transmission

Steerable Lift Axles come in 13K and 20K capacities.

January 16, 2015

Tru-Track 13K and 20K as part of Tru-Track Series which offers capacities from 10K&ndash;20K, incorporate quick-change ride height system. Super Short Rail (SSR) version offers compact mounting design for space-critical applications. Weighing 1,297 lb, Tru-Track 20K is built for durability and maneuverability. It offers 25° of wheel cut while accepting 445/65R22.5 tires. Read More

Mechanical Components & Assemblies, Mechanical Power Transmission

Dana Demonstrates Comprehensive Selection of Off-Highway Drivetrain Solutions at Bauma China 2014

December 1, 2014

SHANGHAI – Dana Holding Corporation (NYSE: DAN) is demonstrating its full range of drivetrain solutions for the construction, mining, and material-handling markets that will be exhibited this week at Bauma China 2014. This year in hall N5, stand 210, Dana is presenting a variety of transmission, axle, and driveshaft offerings for Chinese equipment manufacturers to use in domestic and... Read More

Electrical Equipment & Systems, Mechanical Power Transmission, Plant Furnishings & Accessories

Customizable Terminal Enclosure is offered in unsealed version.

November 24, 2014

While designed for desktop use, UNIDESK unsealed sloping front terminal enclosures can also be wall mounted. Ergonomic aluminum instrument enclosures, supplied pre-assembled, feature recessed front panel for membrane keypad, pre-punched PCB fixing points in base, and flat rear wall for installing switches, connectors, power inlets, and cable glands. In addition to light gray and black colors, 3 sizes are available: 7.87 x 7.87 x 4.02 in., 11.81 x 7.87 x 4.02 in., and 15.74 x 7.87 x 4.02 in. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mechanical Power Transmission

DIN Rail Mounting Enclosure houses Raspberry Pi B+.

November 20, 2014

Produced in UL94V-0 self-extinguishing material, Modulbox 4M RMB fosters use of Raspberry Pi B+ within industrial and process control applications. Enclosure features transparent top panel, body enclosure, and base, and DIN rail hook allows enclosure to be mounted on DIN Rail. Manufactured with openings for specific input and output requirements of Raspberry Pi B+ platform, enclosure can also be machined/printed to custom specifications for volumes from 50&ndash;100 minimum. Read More

Mechanical Power Transmission, Transportation Industry Products, Green & Clean

Two-Speed eAxle enahnces performance of hybrids, EVs.

November 18, 2014

Weighing 27 kg and measuring less than 325 x 562 x 313 mm, 2-speed eAxle gives electric motor additional gear ratio. This improves acceleration and electric range, benefiting driving dynamics and CO2 emissions. Exhibiting 97% efficiency, Technology also enables motor and all associated systems to be downsized, reducing mass and increasing efficiency. Technology responds intelligently to deliver instant, high-torque, all-wheel drive experience, pure electric range, or parallel hybrid mode. Read More

Mechanical Power Transmission, Green & Clean

Meritor® 17X EVO(TM) Linehaul Axle is Built for Performance and Durability in Multiple Global Markets

October 1, 2014

HANNOVER, Germany, – Meritor ® (NYSE: MTOR) will showcase its 17X EVO™ axle for linehaul applications at the 65th IAA Commercial Vehicles 2014 show Sept. 25-Oct. 2 in Hannover, Germany. Originally designed for 4x2 applications in Europe, the 17X EVO is built with advanced manufacturing technologies for greater durability and substantial reductions in fuel consumption. The axle will be... Read More

Mechanical Power Transmission

AAM Europe to Exhibit at the IAA Commercial Vehicle Show 2014

September 30, 2014

-- Booth #A04, Hall 24 DETROIT — AAM, a leading global supplier of driveline and drivetrain solutions, today announced that at IAA Commercial Vehicles 2014 in Hanover, Germany, it will showcase the company's continued technology leadership in driveline efficiency with products that support the light vehicle and commercial vehicle segments. IAA Commercial Vehicle Show 2014, one of... Read More