Weatherchem Corp.    Twinsburg, OH 44087
Jan 19, 2009 With tear-drop shaped orifice and sharp cut-off lip, LiquiFlapper® Closure provides controlled directional flow of liquids, eliminating mess and run-off. One-piece design has durable hinge and closes with audible snap. In addition to liquid condiments such as marinades, sauces, salad dressings, syrups, and creamers, closure is suitable for controlled dispensing of non-food products, such as liquid detergent and chemical refill applications.

CyberResearch, Inc.    Branford, CT 06405 2932
Jan 09, 2009 Made of 1.6 mm steel, 3U RMSC MX chassis is powered by 400 W EPS power supply to handle 5 hard drives, 7 expansion slots, and 5 cooling fans. With 15 in. of depth behind panel, unit suits applications with limited vehicle space. It accepts variety of ATX motherboards supporting high-powered Core(TM) 2 Quad, Core 2 Duo, and Pentium® 4 CPUs. CD-RW/DVD-ROM drive and 4 open drive bays that support SATA or IDE drives, depending on motherboard selected, are also featured.

3M Co., Electronic Products Div.    Austin, TX 78726
Jan 06, 2009 Suited for smart cards, e-passports, ID cards, banking/credit cards, and transportation cards, 3M ToughShield Protective Sleeves block radio frequencies to help eleiminate data theft or skimming. Inner copper-coated conductive polyester layer is bonded to outside layer of 3M TufQUIN inorganic hybrid insulating paper. This material is tear- and water-resistant and also withstands wear. After 2,000 cycles of abrasion resistance testing, it retains 99% of its shielding effectiveness.

Elma Electronic Inc.    Fremont, CA 94538
Jan 06, 2009 Available in desktop or rackmount formats, EcoBox(TM) 6-slot, single module unit features 1 MCH (MicroTCA Carrier Hub) and 5 AMC slots. It uses 300 W ATX power supply and integrates IPMI bus, used for voltage supply and control, on active backplane. Fully compatible with MicroTCA specifications, chassis has direct SATA connections and PCIe links integrated on backplane. Active backplane management includes 3.3 V, in-rush current control, and over-current protection.

Stafford Manufacturing Corporation    North Reading, MA 01864-0277
Jan 05, 2009 Suited for prototyping and repairs, Remachineable Shaft Collar Kits feature eight 1- or 2-piece fully assembled steel collars per kit, and each has pilot hole that can be machined by user to match their own bore requirements. Sizes range from 1 1/8 to 3 in. OD with 0.235 in. pilot hole for bore. Applications include building new machinery as well as maintenance for fabricating custom sizes to match worn or replacement shafts.

Elma Electronic Inc.    Fremont, CA 94538
Jan 02, 2009 Designed without side or back walls around card cage area, E-Frame Chassis provides access for test and development. Unit includes carrying handle on top, front accessible test points, and monitoring LEDs for +3.3 V, ±5 V, ±12 V, ±24 V, and ±48 Vdc. With modular aluminum construction, tower can support up to 21 slots at .8 in. pitch or 17 slots at 1 in. pitch. Cooling is provided with three 150 cfm fans, which are speed-controlled with fan fail indication.

GLT Products    Walton Hills, OH 44146
Dec 19, 2008 Unlike smooth plastic banding that must be connected with steel buckles, Q-Band® is designed with teeth that allow connecting clip to grip band. Q-Band® is adjustable and reusable, and since clip is not pre-connected to band, ties of any length are possible. Made of polypropylene with fiber reinforcement, Q-Band is suited for HVAC, insulation, electrical, chemical, and maritime industries.

Alltec Corporation    Canton, NC 28716
Dec 19, 2008 Composed of combination of polymer and glass fiber reinforcement materials, FRP Masts are corrosion-resistant and designed to withstand environmental, chemical, and temperature extremes. Units safeguard Early Streamer Emission lightning protection systems from ocean spray and constant wind exposure in harsh environments. Applications include residential facilities, factories, industrial plants, hospitals, schools, and virtually any other rooftop installation.

Micronor    Newbury Park, CA 91320
Dec 17, 2008 MR190 Universal Manual Pulse Generator/Handwheel (MPG) offers both A/A'/B/B' differential line driver and A/B pull-up quadrature outputs in single unit. It provides 100 detent positions per revolution and outputs one A/B quadrature pulse cycle per detent, while DIP switch configures both +5 or +12 V DC power supply options and A/B pull-up interface options. Features include COMBICON screw-down wiring plug and pin header system, metal housing, metal knob, and IP50 rating.

National Instruments Corp.    Austin, TX 78759-3504
Dec 12, 2008 Providing jitter-free communications, 8-slot Model NI 9144 is compatible with more than 30 analog and digital NI C Series modules as well as NI real-time controllers that have 2 Ethernet ports. Chassis also features 2 Ethernet ports, making it possible to daisy-chain multiple chassis from single controller. Using system of synchronized clocks, NI 9144 communicates deterministically across standard CAT5 Ethernet cable and can be distributed up to 100 m between chassis.

AICSYS, INC (Advanced Industrial Computer Systems)    Taipei Hsien   Taiwan
Dec 10, 2008 With heavy-duty steel construction, Model WMC-704M 7-slot full-length shoe-box wallmount or benchtop chassis supports ATX motherboards for industrial automation applications outside server room. It is equipped with two 5.25 in., one external 3.5 in. and one internal 3.5 in. drive bays. Hold down bar and clamps are provided to ensure stable operations against heavy vibration. Features include 12 cm ball bearing fan and replaceable air filter.

Numatics    Mt. Pleasant, TN 38474
Dec 08, 2008 CST Series stopper cylinders are designed to stop objects at various conveyor processes, such as machining or processing stations. They are available in 32 mm bore size with 20 mm stroke, while 40 and 50 mm bore sizes offer 30 mm stroke. Shaft version is solely mechanical stop, roller version can retract without frictional drag against face of work piece, while on toggle-lever version, impact forces are diverted via toggle lever to hydraulic shock absorber and dampened.

Igus, Inc.    East Providence, RI 02914 0349
Dec 02, 2008 Featuring turn-to-fit hand clamp, DryLin® W linear guides let users decide whether standard clearance is acceptable or if unit needs to be pre-tensioned. Tolerance can be modified over entire bearing surface by inserting provided Allen key into adjustment screw in side of carriage. Completely lubrication-free and contaminant-resistant, bearings come in hard-anodized aluminum, single- and double-rail configurations. Self-lubricating triboplastic helps carriages glide smoothly.

QuickBite LLC    Lexington, NC 27292
Nov 25, 2008 QuickBite Couplers use automatic dual-jaw locking system to couple trailer to vehicle. When vehicle ball enters trailer coupler, set of inner jaws automatically close around it. Jaws are captured by torsion spring-loaded locking outer-jaw, making it impossible for ball to escape. System eliminates need to raise trailer above ball and stops coupler-to-ball hang-ups. Use of horizontal and vertical capture areas for ball eliminates need for perfect line-ups.

Pickering Interfaces    Wobum, MA 01801
Nov 21, 2008 Equipped with 7 and 18 slots, respectively, Models 60-102 and 60-103 accept over 500 3U PXI modules ranging from low power reed relay cards to Matrices, multiplexers, EMR relays, and RF/microwave and optical switches. Each chassis offers smart control of fan speed and supports solid state switching with up to 40 A current capacity. Current condition of chassis is displayed on front panel status LEDs and can also be monitored remotely via rear panel RS232 port.

Synopsys, Inc.    Mountain View, CA 94043 4033
Nov 17, 2008 Silicon-proven DesignWare SATA PHY IP is designed for SMIC 130 nm process technology, for use in host and device applications such as mobile internet devices, set-top boxes, solid state drives, and optical disk drives. It consists of AHCI host and device digital controllers, as well as verification IP, and features built-in diagnostic capabilities and ATE test vectors. Relying on standard digital CMOS process technology, PHY does not require special process options.

Rex-Cut Products, Inc.    Fall River, MA 02720
Nov 14, 2008 Available with Type-R or -S fasteners, Rex-Cut® Cotton Fiber Quick Change Disc Kits contain eight 2 or 3 in. diameter discs in assortment of grit sizes. Featuring layers of non-woven cotton fiber that are impregnated with aluminum oxide abrasives and pressed together, discs constantly reveal fresh abrasives, resulting in smooth, controlled grinding. Discs will not smear stainless steel and other hard materials and are non-loading on aluminum and composites.

Murrplastik    Doylestown, PA 18901
Oct 29, 2008 During installation, individual side links of Murrplastik (MP) 52.2 PowerLine and MP 82.2 HeavyLine chains are assembled angled to each other. After one short turn, distinct click signals that pieces have engaged properly. To disengage, side links are turned back to each other and levered apart with screwdriver. Chains feature heavy-duty connection between frame bridge and side wall, and frame bridge can be removed by unscrewing locks, without any risk of injury, using screwdriver.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Oct 20, 2008 Offered in 2 sizes with 4.840 x 2.930 in. or 6.890 x 4.650 in. internal footprint to fit common thermostats and transmitters, Series TG Polycarbonate Thermostat Cover prevents physical damage and unauthorized adjustments. Low-profile (2.125 or 3 in.) design with ventilation slits promotes optimal air flow for obtaining accurate measurements. Each cover comes with 2 keys as well as mounting hardware for drywall and concrete walls.

Igus, Inc.    East Providence, RI 02914 0349
Oct 13, 2008 Developed for indoor/outdoor cranes as well as conveyor systems, System P4 exhibits minimal noise and wear at high speeds - even with loads up to 20 lb/ft. There is almost no weight limit due to center links, and each link has same pitch to minimize vibration in radius. Tested outdoors at speeds to 23 fps over distances of 400 ft, carriers have plastic bridges and grooves along surface so that upper run glides smoothly over lower run. Plastic rollers are firmly integrated into sides.