Metals

Related Categories
Materials & Material Processing, Test & Measuring Instruments

SP35 Gage Leadwires feature three-wire quarter bridge configuration.

Mar 20, 2017

Suitable for high temperature stress analyses of automotive and aerospace components, SP35 Gage Leadwires are used for CEA- and WK-series strain gages. Featuring 3 m of 30-AWG, etched PTFE leadwires, SP35 leadwires allow gages to support requirements to +350°F and +400°F temperature. SP35 option eliminates the need for soldering on test article.

Read More

Materials & Material Processing

Hitachi SLD-i Cold Word Premium Tool Steel Now Available Through Diehl Tool Steel

Feb 25, 2017

CINCINNATI, OH (February 24, 2017) – Diehl Tool Steel is now offering Hitachi Metals America’s SLD-i cold work premium tool steel, an advanced tool steel grade used in various blanking and forming application where AHSS parts are processed. It is produced using the same heat treatment as D2 but exhibits better wear and toughness when used for forming and trim sections. It also shows better... Read More

Materials & Material Processing

Carbon Steel Grinding Balls are designed for power plants.

Jan 13, 2017

Measuring 1-1/4 in., Carbon Steel Grinding Balls meet 62-65 hardness rating. Ensuring minimal lead time, units are packed in 2000 LBS and steel drums are strapped to pallets.

Read More

Materials & Material Processing, Packaging Products & Equipment

Calypso Foil Lidding with 50% greater puncture strength.

Dec 14, 2016

Providing solutions to applications that use heavy gauge foil lidding, Calypso Foil Lidding can be used to lid edible, non-edible and medical products. Product is no-tear, no-shred and easily peels in one piece and is puncture proof. Lid has soft edges that will not cut through skin of consumer when handling.

Read More

Adhesives & Sealants, Materials & Material Processing

Thermally Conductive, High Temperature Resistant Epoxy Passes NASA Low Outgassing Tests

Dec 13, 2016

Certified to meet ASTM E595 NASA low outgassing standards, Master Bond EP46HT-2AO Black is well suited for the aerospace, electronic, opto-electronic industries and can be used vacuum environments. This two component system blends thermal stability with a high strength profile for a variety of bonding, sealing and encapsulation applications.

EP46HT-2AO Black combines superior thermal... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing

New Yorker Electronics Expands its PDI Heavy Duty Pin & Sleeve Connector Lines

Dec 12, 2016

Power Dynamics Watertight and Splash-Proof Pin & Sleeve Connectors Maintain Reliability in All Types of Industrial Applications

NORTHVALE, NEW JERSEY - New Yorker Electronics has expanded its inventory of industrial Pin & Sleeve Connectors by stocking the entire Power Dynamics, Inc. (PDI) IEC 60309 line of connectors, plugs, inlets and receptacles. This heavy duty connector series is... Read More

Materials & Material Processing, Optics & Photonics

MuMetal® Round Bar reduces low field disturbances.

Dec 07, 2016

MuMETAL® Round Bar is used for production of forged components and precision CNC machined MuMETAL® tubes or pipes; required for electrical and electronic technical applications applying magnetic shielding alloy to reduce low field interference. Bars are available diameters from 0.250 in. to 8.17 in. [6,35mm to 207,5mm], and custom designs to spec. Tube or Pipe are designed and produced with... Read More

Materials & Material Processing

Hobart Expands Stainless Steel Filler Metal Offering

Nov 25, 2016

TROY, Ohio. November 23, 2016 - Hobart announced it has expanded its stainless steel filler metal offering as part of a renewed emphasis on this portfolio, adding options in solid wire and flux-cored wire. The comprehensive portfolio of stainless Hobart filler metals also includes stick electrodes and metal-cored wires.

Additions to the Hobart stainless product lineup include solid... Read More

Materials & Material Processing, Optics & Photonics

1OZ Silver Bar meets IRA standards.

Nov 24, 2016

Displaying Republic Metals logo on top, 1oz Silver Bar is designed with clean and modern look to emphasize purity. Weight and purity in center and assay logo at bottom is displayed on silver bar. Silver bar meets IRA standards.

Read More

Materials & Material Processing, Mechanical Components and Assemblies

Sandvik Presents its Portfolio of High-Performance Products at Rio Oil & Gas

Nov 14, 2016

HOUSTON, Nov. 10, 2016 - Sandvik, a developer and producer of advanced stainless steels, special alloys, titanium and other high-performance materials, exhibited at the 18th annual Rio Oil & Gas Expo and Conference, the largest oil and gas event in Latin America, which was held from Oct. 24-27, in Rio de Janeiro.

At the show, Sandvik presented its wide range of corrosion-resistant... Read More

Materials & Material Processing

Ferrite Beads suit high-reliability applications.

Sep 27, 2016

Designed to meet requirements of DSCC 03024 specification, HRB-US Series begins as full reel ferrite bead lots acquired through OEM approved distribution channels and traceable to selected manufactures of commercial devices. Devices pass through pre- and post-screening processes while undergoing AEM’s Tin-Lead conversion. Products are then subjected to DSCC 03024 Group A, B, and C testing.... Read More

Materials & Material Processing

Aluminum and Copper Foils in Dozens of Thicknesses

Sep 12, 2016

Coraopolis, PA - Goodfellow is known worldwide for its huge range of metal foils – foils of more than 160 metals and metal alloys to meet specific scientific and industrial needs. Two of the most sought-after and versatile foils are aluminum and copper. Aluminum foils are available in more than 80 sizes and thicknesses, the thinnest being 0.0008mm. These foils are typically used for RD projects... Read More

Architectural and Civil Engineering Products, Construction Equipment and Supplies, Materials & Material Processing

Falcon Steel America Exhibits at TSDOS Conference

Sep 07, 2016

Company Sponsors Casino Night for Attendees on September 7 FORT WORTH, TEXAS - September 2, 2016 - Falcon Steel America will promote its steel structures and electrical substations during the Transmission and Substation Design and Operation Symposium (TSDOS) September 7 – 9, in Frisco, Texas. The Texas company will also sponsor a Casino Night for TSDOS attendees on Wednesday, September 7.... Read More

Materials & Material Processing

Cast Silver Bar is IRA and RRSP acceptable. .

Aug 12, 2016

Measuring 32.4 x 67 x 8 mm, 5 oz Cast Silver Bar is cast from .999 fine silver with Republic Metals' logo displayed on top center. Weight, fineness, and Republic Metals' assay mark is located on bottom center. Product is individually heat sealed in plastic and stored in boxes of 25 with foam inserts for protection during transit. Read More

Materials & Material Processing, Mechanical Components and Assemblies

Boker's Offers Manufacturing Capabilities for Metallic and Non-metallic Disks

Aug 05, 2016

Metallic and Non-metallic Disks Minneapolis, MN — Boker’s is pleased to announce its extensive manufacturing capabilities for metallic and non-metallic disks for spacing and specialized assembly applications. The widest range of disks to satisfy multiple job requirements Most commonly known as discs, circles, plates and/or slugs, disks are designed like a flat washer, generally without the... Read More

Materials & Material Processing

Aleris Secures New Multi-Year Contract with Airbus for Significantly Expanded Range of Aluminum Products

Jul 27, 2016

New China facility, technology investments enable Aleris to strengthen position with key aerospace customer CLEVELAND - Aleris has signed a new multi-year contract with Airbus to supply aluminum plate and sheet to be used in the production of all Airbus aircraft programs. The contract starts in 2017 and also includes the supply of technically advanced wing skin material. The agreement further... Read More

Materials & Material Processing, Mechanical Components and Assemblies

Composite Clad Metal Strip combines best properties of each metal.

Jul 01, 2016

Work-hardened and metallurgically bonded, Composite Clad Metal Strip inlays up to 3 metals, such as aluminum, silver, gold, and gold alloys or other precious and base metals, into copper alloys or steel to exploit best properties of each. Non-porous end-product, available from 0.100–0.004 in. thick, meets or exceeds ASTM B248 special thickness tolerances and can be slit from 0.122–7.0... Read More

Materials & Material Processing

Diehl Spotlights Accu-Square(TM) Pre-Squared Tool Steel and Hitachi Steels at Amerimold 2016

Jun 20, 2016

CINCINNATI, OH – Diehl Tool Steel is featuring its popular Accu-Square pre-squared tool steel capabilities, as well as a selection of Hitachi hot work tool steel, at Amerimold 2016, which is currently being held in Novi, Michigan. Visitors to Diehl’s booth are able to inspect the company’s wide selection of cold work and hot work tool steel pre-squared to tool-maker tolerances, as well as... Read More

Materials & Material Processing

Gold Ingots feature tamper-proof packaging.

Jun 20, 2016

Measuring 24.45 x 41.65 x 2.20 mm, 1 oz Gold Ingots feature ingot-securing cradle designed to ensure complete protection from movement or tampering. Red assay certificate boasts good delivery listings, such as London Bullion Market Association (LBMA), Chicago Mercantile Exchange (COMEX), and the Shanghai Gold Exchange (SGE). Reverse side of assay certificate displays ingot's purity, weight,... Read More

Materials & Material Processing, Services, Test & Measuring Instruments

Free Hobart Filler Metal Selector and Calculator App Now Available for Android

Jun 17, 2016

TROY, Ohio — Hobart has announced the availability of its Hobart Filler Metal Selector and Calculator for Android devices via a free download at the Google Play Store®. The app was previously available only for iPhone and iPad in the App Store®. Both versions of the app provide a quick reference with multiple functions to help users calculate the amount and type of filler metal necessary... Read More