Cleaning Machines

Cleaning Products & Equipment, Materials & Material Processing

Floor Cleaning Machine features battery-powered operation.

August 30, 2016

Designed to remove soil completely from virtually any type of hard floor surface, Auto-Vac is suited for hallways, entranceways, cafeterias, lobbies, and warehouses. Automated system can clean more than 20,000 ft²/hr and has been certified by National Floor Safety Institute because it so effectively removes soils, it helps prevent slip-and-fall accidents. Auto-Vac can be added to OmniFlex trolley-bucket, allowing users to perform number of floor care cleaning tasks. Read More

Cleaning Products & Equipment, Materials & Material Processing

Efficient Wall-Mount Fill Station reduces facility footprint.

July 13, 2016

Offered as wall-mounted system, CleanCore™ 3.0 Fill Station uses technology that combines water and oxygen to produce aqueous ozone – safe and powerful cleaning solution. Operation is designed for minimal environmental impact, and flow rate of 3 gpm meets demands of on-site/on-demand cleaning. Uses include cleaning floors, carpet, restroom fixtures, counters, and more. Read More

Materials & Material Processing

KYZEN to Show Cleaners for Wafer Bumping, Wire Bonding and Cu Pillar Flip Chip Applications at SEMICON West

June 27, 2016

NASHVILLE - June 21, 2016 - KYZEN today announced plans to exhibit in Booth #305 at SEMICON West, scheduled to take place July 12-14, 2016 at the Moscone Center in San Francisco, CA. KYZEN will exhibit MICRONOX® MX2302 for wafer bumping, Ionox® FCR for wire bonding and MICRONOX® 2707 for Cu pillar flip chip applications. MICRONOX® MX2302 is an engineered semi-aqueous solvent blend... Read More

Materials & Material Processing

Industrial Pass Through Washer targets hard-to-clean applications.

May 10, 2016

Along with 12 x 12 in. washer zone on chain mesh belt conveyor, CBW1212-B features two 20 hp, reservoir-mounted, vertical centrifugal pumps with 260 gpm capacity at 110 lb/in.² pressure. Belt flow speeds are adjustable from 2–34 fpm, natural gas burner produces temperatures from 170° to 180°, and 12-gauge steel cabinet is optionally available in stainless steel. For 360° coverage, 8 overhead spray bars and 8 spray bars under top plane of belt also provide side spray. Read More

Cleaning Products & Equipment, Materials & Material Processing

PNC Boosts Assembly Capabilities with New Electronic Cleaning System

May 4, 2016

PNC Inc. has announced another addition to its continually expanding assembly department: an inline electronic cleaning system called the Nanojet from Austin American Technology. Capable of both water and aqueous chemical cleaning applications, the NanoJet inline system also offers easy accessibility and simple maintenance to keep up with PNC's ever increasing needs while never... Read More

Cleaning Products & Equipment, Machinery & Machining Tools, Materials & Material Processing

Robotic Nozzle Cleaning Station reduces integration efforts.

April 29, 2016

With digital Ethernet communications, TOUGH GUN™ TT3E Reamer fosters integration into digital controls infrastructure. Design eliminates need for analog switch, which also reduces cabling requirements and reduces potential failure points. Also included, remote monitoring capabilities let companies oversee and troubleshoot I/O of each reamer function and its allowable parameters in real-time and without removing unit from weld cell. Automatic and manual modes afford distinct control options. Read More

Cleaning Products & Equipment, Materials & Material Processing, Non-Industrial Products

It's a Job for The Mopster

April 22, 2016

Impact Products’ LBH18 Mopster bucketless mop is a professional, commercial-grade microfiber wet mop system that makes cleaning floors easier, safer, and better. This system comes complete with handle assembly, 18-inch microfiber frame (hook-and-loop), dispensing bottle, instruction sheet, and chemical identification label sheet to comply with OSHA regulations. Use the Mopster for damp... Read More

Machinery & Machining Tools, Materials & Material Processing

Tumblast Systems

April 22, 2016

Stratus Technologies supplies Gibson Tumble Blasters process multiple parts, ranging in size from small to medium, with a level of speed and efficiency unmatched by other types of equipment in a comparable price range. Gibson produces Tumble Blasters in six standard models with load capacities ranging up to 3,000 pounds or 24 cubic feet. Our smaller units, available with either wheel or... Read More

Cleaning Products & Equipment, Materials & Material Processing

Award After Award for the AutoVac

April 15, 2016

The battery-powered AutoVac floor scrubbing system from Kaivac is racking up award after award. This floor scrubbing system won the ISSA 2015 Innovation Award; was among the winners of the 2012 National Restaurant Association’s Kitchen Innovation Award; and just won the innovation award at the European International Cleaning Show. So what gives? The key reason the AutoVac is winning so... Read More

Cleaning Products & Equipment, HVAC, Health, Medical and Dental Supplies & Equipment, Materials & Material Processing

HEPA Filtered Hazmat Vacuum increases workplace safety.

April 15, 2016

Safe-Pak™ collection unit facilitates collection, containment, and disposal of hazardous materials, including potent compounds. Design and functionality eliminates possibility of contamination of cleanroom vacuum or facility and thereby increases worker safety. With enclosed HEPA filter, self-contained unit safely isolates hazardous materials without contaminating cleanroom vacuum. When full, unit is removed and discarded. Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment, Materials & Material Processing, Non-Industrial Products, Green & Clean

The Green Cleaning No Chemical Alternative

April 8, 2016

The CleanCore™ Aqueous Ozone Fill Station is a green alternative to using conventional cleaning chemicals.  Perfect for everyday cleaning, the system connects directly to a water pipe, and with its unique and patented mixing chamber, combines the natural elements of water and oxygen. This creates aqueous ozone which can be used to clean restroom fixtures, counters, walls, carpets, floors -... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Materials & Material Processing

Heavy-Duty Rotary Screen minimizes downtime with extended service.

April 5, 2016

Designed for blast machines operating in heavy-duty environments, HD Rotary Screen sifts out larger chunks of debris, such as core lumps, ahead of airwash and/or magnetic separation during abrasive cleaning cycle. Construction of this hard-wearing rotary screen, designed for extended service life, contributes to sturdiness via use of hard steels in strategic locations, abrasive-resistant flighting and end bands, as well as DOM tubing.

Read More

Materials & Material Processing, Green & Clean

Bio-Renewable Parts Cleaners work on larger industrial parts.

April 5, 2016

CleanBox Compact S, CleanBox Maxi, and CleanBox Mega , intended for use with cleaning agents CB 100/100 ALU, enable companies to replace toxic solvents with safer alternative and improves cleaning and degreasing efficacy for regular, large, and over-sized industrial parts. Compact S and Maxi are available in heated versions to increase cleaning efficiencies and non-heated versions for room temperature use. CleanBox Mega handles extremely large parts or multiple large parts concurrently. Read More

Cleaning Products & Equipment, Materials & Material Processing, Services

Ransohoff Introduces Contract Cleaning Services for Production Parts Manufacturers

March 24, 2016

Cincinnati, OH – Ransohoff, a division of Cleaning Technologies Group LLC, and the industry leader in parts cleaning equipment, is now offering Contract Cleaning services for manufacturers seeking to outsource the production cleaning of their parts. Now manufacturers of a wide range of part types, with low to high volume requirements, who need exceptionally thorough part cleaning prior to... Read More

Cleaning Products & Equipment, Materials & Material Processing

AQUANOX® A8820 Advanced Aqueous Stencil Cleaner Recognized by the NPI Award Program

March 22, 2016

NASHVILLE – KYZEN announces that it has been awarded a 2016 NPI Award in the category of Cleaning Materials for its AQUANOX® A8820 Advanced Aqueous Stencil Cleaner. The award was presented to the company during a Tuesday, March 15, 2016 ceremony that took place at the Las Vegas Convention Center during the IPC APEX EXPO. This marks KYZEN’s ninth consecutive NPI Award. “Innovation is... Read More

Cleaning Products & Equipment, Materials & Material Processing

Automated Robotic Washer accelerates precision parts cleaning.

March 14, 2016

Delivering speed and efficiency for precision parts washing operations, TT-180 Ransobotic Washer features robot-operated spray nozzles, precision worktable, as well as optimized controls and programmability. Cycle times range down to as little as 30 sec, and part size capabilities range up to 12 in.² and 40 lb. While standard and high-pressure (TT-180-HP) models are available, both have modular design that supports end-user requirements for various volumes and throughput demands. Read More

Materials & Material Processing, Thermal & Heating Equipment

Fluidized Temperature Bath safely cleans larger dies and parts.

February 11, 2016

With working volume sized for thermal cleaning of larger dies and parts, model FTBLL12W features 12 3/8 in dia x 13 in. deep parts basket with 60 lb max weight capacity. Cleaning times are typically <1 hr, and insulated, turnkey design facilitates safe operation. Requiring 220–240 Vac at 30 A and shop air fixed at 40 psi, product has 122 to 1,121°F temperature range, fully automatic fluidizing air control, and exhaust port for fume and smoke capture. Small parts basket is optional. Read More

Cleaning Products & Equipment, Materials & Material Processing

Cleaning Systems come in modular and benchtop models.

February 4, 2016

Offering Multi-Tank Cleaning System in modular plug-and-play configuration, Modular Aquarius™ Cleaning System comes standard with 3 frequencies of 40, 72, and 104 kHz in each tank. System includes Siemens controller and automated hoist transfer system. Additional modules can be added at any time. Known as Benchtop Series, PROHT Sonic Tank features all stainless steel construction and is suited for cleaning small parts on intermittent to semi-production basis. Read More

Cleaning Products & Equipment, Materials & Material Processing

Ultrasonic Cleaning Systems feature multi-frequency design.

February 4, 2016

Consisting of multi-frequency, sweeping or non-sweeping system, Megasonics System features multiMEG's 4-mode operation: 430 kHz conventional streaming megasonics, 430 kHz dualSWEEP® megasonics,1.3 MHz conventional streaming megasonics, and 1.3 MHz dualSWEEP® megasonics. Multi-Frequency Ultrasonic Cleaning System, constructed of all stainless steel, is designed for use with single- or multi-frequency generators and is suited for cleaning small parts on intermittent to semi-production basis. Read More

Cleaning Products & Equipment, Electronic Components & Devices, Materials & Material Processing

Omegasonics' Ultrasonic Cleaning Systems Receives CSA Certification Mark

January 28, 2016

Simi Valley, CA, – Omegasonics, a global supplier of ultrasonic cleaning systems, today announced that its ultrasonic generators have obtained Canadian Standards Association (CSA) Certification. The elite CSA mark demonstrates that Omegasonics products have been certified by an accredited third party laboratory and have met applicable safety standards as required by North American law. ... Read More