Ticona Engineering Polymers    Florence, KY 41042
Apr 22, 2010 Inherently flame resistant without additives, Vectra G141 is 35% glass-filled, while Vectra G441 is 35% mineral- and glass-filled. Both Vectra G grades offer E/E component manufacturers opportunity to achieve dimensional stability in thin-wall parts, even at temperatures higher than 260°C. Offering potential drop-in solution for FR and HT nylon parts, LCPs are lead-free reflow capable with no moisture related blister issues and no flash and mold deposit.

DSM Engineering Plastics    Stoney Creek, ON L8E2L9
Apr 22, 2010 As bio-based resin for automotive vehicle body parts, including exterior panels, Palapreg® ECO P55-01 is composed of 55% renewable resources and does not require sacrifices of product performance or production speed. EcoPaXX(TM) bio-based engineering plastic combines melting point of approximately 250°C, low moisture absorption, and optimal resistance to chemical substances. Approximately 70% of this polyamide material is based on building blocks derived from renewable castor oil.

Solutia, Inc.    Saint Louis, MO 63166
Apr 22, 2010 Featuring low-e coating, EnerLogic(TM) Series adds up to 92% more insulating power to existing commercial and residential windows. It improves energy efficiency in every season by reflecting away heat from sun in summer and directing radiant heat from heating systems back into rooms during winter. Application effectively transforms insulating power of single-pane windows into double-pane, and double-pane windows into triple-pane.

Bradley Corp.    Menomonee Falls, WI 53051
Apr 21, 2010 Composed of bio-based resin made of soy and corn, Evero(TM) Natural Quartz Material comes in 15 colors and can be molded into round and curved shapes. Material is virtually maintenance-free since it does not require sealing, buffing, or reconditioning. Non-porous surface does not support microbial growth and is stain-, chemical-, scratch-, and heat-resistant. In addition to Class A fire rating, GREENGUARD-certified material meets ANSI Z124.3 and Z124.6.

Henkel Corporation    Rocky Hill, CT 06067
Apr 21, 2010 Suited for handheld and automotive sectors, Multicore LF620 ensures consistent print performance with minimal hot slump, even in regions with temperatures of 86°F or more and RH upwards of 80%. No-clean, halide-free formula exhibits low voiding in CSP via-in-pad joints and optimal solderability over range of surface finishes including Ni/Au, Immersion Sn, Immersion Ag, and OSP copper. Paste offers abandon time of 4 hr and print work-life up to 24 hr with no degradation in print quality.

STMicroelectronics    Lexington, MA 02421
Apr 20, 2010 Optimized to meet main and auxiliary data channel needs of DisplayPort Vesa 1.1a standard, DPIULC6-6DJL blocks hazardous voltage spikes and is transparent to data signals, allowing them to pass undistorted at highest possible speed. It offers 5 GHz bandwidth, capacitance of less than 1.5 pF, and 100 W ±10% characteristic impedance. Available in 5 x 6 mm leadless QFN package with 18 I/O, device meets standards including IEC 61000-4-2 level 4-15 kV (air discharge) and 8 kV (contact discharge).

Celanese Corp.    Houston, TX 77258
Apr 20, 2010 TufCOR(TM) 703 is based on vinyl technology to help caulk formulators achieve appropriate rheology and finishing properties, allowing for proper gunnability and smooth application. It promotes adhesion to multiple substrates, including wood and cement, in dry, interior applications, and also offers filler acceptance that provides wide range of pigment-to-binder ratios. Polymer also meets builders' requirements for freeze-thaw stability.

BASF Corp.    Wyandotte, MI 48192
Apr 20, 2010 Intended for specialty slab applications, Pluracol 5250 features 50% solids content that allows for firm foam and can be used in high-load-bearing applications. It can be customized to lower percent solids graft polyol at manufacturing site. With 45% solids content that maximizes load bearing properties of flexible slabstock products, Pluracol 4600/4800 slab foam graft polyols are formulated with low volatile inhibitors, which can reduce VOC levels in customers' final products.

Beckhoff Automation LLC    Minneapolis, MN 55337
Apr 16, 2010 Available in 12 and 15 in. sizes, CP77xx and CP79xx Panel Series meet strict hygiene regulations for food, packaging, and medical industries and are also suitable for cleanrooms. Stainless steel panels with IP65 protection have gapless housing design with flush-mounted touch screens. Equipped with Intel® Atom(TM) processor, CP77xx Panel PCs are based on Beckhoff motherboard with 1 sec UPS and 2 Ethernet ports. CP79xx Control Panels include DVI/USB port and can be installed up to 164 ft from PC.

Kaivac, Inc.    Hamilton, OH 45011
Apr 15, 2010 Suited for any facility, multifunctional KaiMotion(TM) Flex system combines trolley framework, self-dispensing solution bucket for floor care, interlocking bin systems, and color-coded microfiber technology. System stores up to 5 semitransparent bins that can be used with or without system to load and transport variety of cleaning tools and supplies. It enables hygienic mopping, minimizes possibility of cross contamination, and allows for flawless waxing.

Ransohoff    Cincinnati, OH 45246
Apr 15, 2010 Featuring U1B transducers and all-solid-state controls, Grease Monkey Classic model GMC-3523 uses ultrasonics, oil removal, and particulate filtration to optimize cleaning performance for parts with one dimension up to 35 in. Self-contained cleaning system offers fully automated operation and features casters for portability. Load capability is rated to 125 lb, and working dimensions are 35 in. left to right, 23 in. front to back, and 18 in. deep.

Quadro Engineering Corp.    Waterloo N2V1A1  Canada
Apr 15, 2010 Employing rotor-stator suspension milling technology, high shear Ytron HV-Wet Mill is available in 3 different models ranging from 25-125 hp with capacities up to 150 gpm. Energy optimized tooling operates at tip speeds up to 70 m/sec with low power consumption, while sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft, optimizing clean-in-lace results. Options include selection of motors, controls, and portable bases.

Daimer Industries Inc    Woburn, MA 01801
Apr 13, 2010 Designed to safely break bonds that hold oil and grease together, Eco-Green® Ultra-Power® Parts Washer and Cleaner uses Micro-Blasting® technology that relies on nano atomic green particles to clean machine parts and tools without toxic solvents. Green cleaning chemicals dissolve hydrocarbon residues, such as oils, petroleum derivatives, fats, sugars, greases, and proteins. Formulation comes in 5, 15, and 5,000 gal sizes as well as 55 gal drums and 275 gal totes.

NXP Semiconductors    NanGang District   Taiwan
Apr 12, 2010 Model IP4284CZ10 delivers 8 kV of contact ESD protection, which is at level 4 according to IEC61000-4-2 standard. Differential crosstalk is -70 dB at 2.5 GHz and typical line to line capacitance matching is 0.05 pF, while pass-band ranges up to 8 GHz. Product has channel capacitance of 0.5 pF, in range of 0-5 V independent of bias voltage. It is available in 1.0 x 2.5 x 0.5 mm, leadless SOT1059 or leaded, 3.0 x 3.0 x 1.1 mm TSSOP10 package.

Tingue Brown & Co.    Saddle Brook, NJ 07663
Apr 09, 2010 Combining blended Nomex®-polyester felt with Nomex scrim cloth, Tingufelt Gold Blend-SG delivers long-term performance and heat, moisture, and hydrolysis resistance. Suited for installation on large roll flatwork ironers at commercial laundries, hotels, hospitals, nursing homes, and other facilities, felt is available in 130 and 150 in. widths at standard weight of 27 oz/sq yd.

SABIC Innovative Plastics    Pittsfield, MA 01201
Apr 09, 2010 Featuring high heat resistance and high flow, Lexan(TM) XHT clear, polycarbonate copolymers are suitable for molding thin-wall parts such as medical devices and electrical fuses. Materials minimize color shift and retain clarity over long lifespan. When vacuum-metalized, products made with copolymers can withstand temperatures of up to 195°C without blistering, hazing, or delaminating. Copolymers can be recycled and direct-metalized without lacquering, so scrap can be re-used in molding process.

Flexmag    Marietta, OH 45750
Apr 09, 2010 FlexCoat - EZ(TM) is engineered to eliminate issues associated with conventional flexible magnetic product laminated with printable laminate such as vinyl or paper. Adhesive-free and 100% recyclable, this flexible magnetic product is manufactured with printable coating compatible with digital, offset, flexo, and screen printing methods. Phthalate-free product, supported by most printing equipment, is not subject to curling and has no rough edges.

SPEX CertiPrep, Inc.    Metuchen, NJ 08840
Apr 07, 2010 SPEX CertiPrep Pure and Ultra Pure Fusion Fluxes and additives have Micro Bead composition that eliminates dust that can clog instruments. Beads also lower weighing times and, with each bead having same ratio of components, improve consistency. Products are also prefused with additives for accuracy and all batches are manufactured identical to one another, with no lot-to-lot variation.

Metabo Corp.    West Chester, PA 19380 4243
Apr 06, 2010 Intended for use in concrete surface grinding of large areas and floors, 7 in. Angle Grinder Surface Prep Kit includes W23-230 angle grinder and dust control shroud that protects users from harmful debris. Use of optional vacuum protects users from silica dust exposure in accordance with OSHA regulations. Along with 15 A motor, W23-230 features switch with lock-on capability and auto-stop carbon brushes. It offers 2,300 W of power, 150 lb-in. torque, and 6,600 rpm no-load speed.

Bel-Art Products    Wayne, NJ 07470
Apr 06, 2010 Used to stir and mix everything from solutions in cuvette to 55 gal drums, Spinfinity(TM) is manufactured under protected processes that encapsulate magnet in plastic material. Covering has zero porosity and addresses conditions that cause material breakdown. While octagon shape optimizes surface area, interrupted profile of built-in pivot ring minimizes friction and chattering. Product comes in 3 x ½ in. size (item 37190-0001) and suits applications concerned with sample contamination.