Materials & Material Processing
(Showing headlines 901 - 920) << 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 ...
Electrically Heated Inert Atmosphere Oven is rated to 500°F.
Grieve Corporation, The
Round Lake, IL 60073-2898
May 27, 2010
Used for heat treating operations, No. 967 features 9 kW installed in Incoloy sheated tubular heating elements and workspace dimensions of 24 x 24 x 24 in. Its 400 cfm, 1/3 hp recirculating blower provides horizontal, front-to-rear airflow to workload, and all interior seams are welded gas-tight. Along with 4 in. insulated walls and aluminized steel exterior, features inlcude onboard digital programming temperature controller and manual reset excess temperature controller.
Rotary Tank Cleaning Machine has low maintenance design.
East Sussex East Su BN8 4HZ United Kingdom
May 26, 2010
HydroWhirl(TM) Orbitor high-impact tank cleaning machine features minimal number of moving parts and can be stripped and rebuilt onsite in less than 15 min. Self-cleaning/lubricating system can fit through small, restricted access flanges and is suitable for tanks with up to 130 ft dia in applications where low water, energy, and chemical consumption are required. Options include 2 or 4 nozzles, variable cycle times, male/female connections, and 360° or 180° down and up wash patterns.
Polyester Overlaminate Film features removable adhesive.
Oak Harbor, OH 43449
May 26, 2010
Produced from clear polyester film featuring water emulsion acrylic adhesive system, self-wound 600REM and 614REM are engineered for medium and low-tack removable options for various applications. While 600REM offers light removable adhesive, 614REM hosts ultra-light removable adhesive. Common uses for both include extended content labeling for booklet product information and pouch labeling used for open/close mechanism on flexible packaging.
UV Absorber Masterbatch targets polyolefin film packages.
Tarrytown, NY 10591-5130
May 25, 2010
Designed for thin gauge films, UVA masterbatch protects packaged contents from UV light damage. Product screens UV wavelengths from 280-380 nm and also optimizes seal strength and print/lamination adhesion. It mitigates plate-out on processing equipment and reduces occurrence of white residue on packages. All ingredients are cleared by FDA for use in olefin polymers and copolymers complying with 177.1520(c).
Pre-Hardened Tool Steel Grades simplify mold/tool production.
HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513 Germany
May 21, 2010
Toolox® 33 tool steel grades are available as K20 plates that allow mold plate machining in one process/setup, as well as P and K252 plates. Products have metallurgical properties that correspond to 1.2311 with machinability better than 1.2312. Suitable for etching, high gloss polishing, and welding, structure of grades does not require stress relieving after machining. Incorporated holes allow plates to be clamped onto HASCO Clamping Fixture A8001, minimizing machine setup times.
Fiberglass Measuring Tapes are lightweight and durable.
Cooper Hand Tools
Raleigh, NC 27612
May 21, 2010
Offered in 50 ft standard, 200 ft engineer's, or 100 m 2-sided metric/English versions, Lufkin® fiberglass long tapes feature 4-arm, open frame design that protects blade and sheds mud and dirt. Yellow clad fiberglass blade, is smooth, kink-resistant, wipes clean, and is impervious to moisture. End hook folds back for true-zero measurements, and size of ring opening facilitates use when wearing gloves. Handle has cushioned grip that promotes all-day comfort.
Plastic Pallet Molding Systems are fully automated.
Wilmington Machinery, Inc.
Wilmington, NC 28406 7308
May 21, 2010
Operating with single stack injection mold, Pallateer System PM-2 produces up to 450,000 single deck nestable pallets per year, and can alternatively produce 225,000 double deck 2-piece pallets. Pallateer system PM-4 operates with 2 stack molds and produces up to 900,000 single deck or 450,000 double deck pallets. Using structural foam injection method which provides for strength at light weights, both models can also process 100% recycled material, even in granulated flake form.
Robotic Titration System conducts Karl Fischer moisture assays.
AB Controls, Inc.
Irvine, CA 92618
May 20, 2010
Integrating industrial-grade robot, Tix System is validated for use in lyophilization cycle development, tech transfer between various manufacturing sites, and manufacturing discrepancy investigations. Automated system rids operators of tedious task of uncapping, capping, weighing, and pouring samples into cell of titrator, saving both time and labor.
Grinding Attachment optimizes efficiency of VTCs.
MAG IAS, LLC
Erlanger, KY 41018
May 20, 2010
Adding surface finishing to processing capabilities of vertical turning centers, automatically changed Grinding Attachment allows finishing of ID, OD, and plane surfaces on parts up to 185 in. diameter. VTCs equipped with 22/33 kW grinding attachment can produce better than 10 µin. finishes and roundness of less than 60 µin. with diameter size control of 0.001 in. Utilizing wheel sizes up to 15.75 in., attachment produces 295 lb-ft torque and max speed of 3,000 rpm.
Red Fluorescent Dye is optimized as molecular imaging label.
VisEn Medical, Inc.
Bedford, MA 01730
May 18, 2010
Featuring lower-red wavelength, VivoTag® 645 is optimized for labeling of biomolecules in range of imaging application for both in-vitro and in-vivo research areas. Product is optimized for system compatibility, brightness, biocompatibility, and stability in biological environments. Areas of particular use include labeling and imaging of proteins, antibodies, and small molecules.
Tungsten Nitride Film lowers via resistance on memory chips.
Novellus Systems, Inc.
San Jose, CA 95134
May 18, 2010
DirectFill CVD tungsten nitride (WN) liner-barrier film is deposited using ALTUS platform with multi-station sequential deposition architecture and pulsed nucleation layer (PNL®) technology. Ultra-thin, 20-angstrom WN film, applied to copper interconnects, features micro-crystalline structure that provides low resistivity diffusion barrier. Film structure eliminates diffusion barrier breakdown mechanisms that result in copper silicide formation and volcano defects.
Auto Body Surface Protection Film uses solvent-free adhesive.
DEVILLE LES ROUEN 76250 France
May 17, 2010
Designed to protect car bodies against external aggressions such as acid rain, bird droppings, and scratches during assembly, transport, and storage, NOVAGUARD®9275 environmentally friendly film also offers nine months of weather resistance. White, polyolefin-based, self-adhesive film is 60 µm thick and is available in rolls of 200 m in widths ranging from 30 mm to 2.5 m. Strong initial adhesion enables immediate shipment of cars.
Laboratory Compounding Line handles small lot sizes.
Technical Process & Engineering, Inc.
Lehighton, PA 18235
May 13, 2010
Able to run trial sizes as small as 1-2 lb for high-cost material additives, 1FRE Lab Compounding Line provides sustained production rates up to 50 lb/hr. Unit runs with 240 V single-phase power and incorporates extended body E-mixer and J-Block feed throat extruder. Engineered for precision compounding of thermoplastics and some types of rubbers, 1FRE can be configured for strand or underwater pelletizing, or material can be taken from mixer discharge to be molded into plates.
Water-Based Mold Sealer enhances mold release capacity.
Rocky Hill, CT 06067
May 13, 2010
Formulated to increase mold release capacity, Frekote® Aqualine® RS-100(TM) is liquid sealer designed to seal micro-porosity in steel and chrome-plated molds. Applied at temperatures between 199-401°F, it is able to withstand temperatures up to 698°F and cures in 15-20 min. Product is available in 1 and 5 gal containers and is applied through low-pressure spray system.
Laser Engraving Materials suit interior signage applications.
Gravograph - New Hermes Inc.
Duluth, GA 30096
May 12, 2010
Gravoply(TM) Laser materials feature matte finish and are designed for use with laser and rotary engraving machines. Allowing precise detail to be engraved, they are available in black, white, red, blue, yellow, and gold and in .05 and .030 in. thicknesses. Brushed or glossy finish is also available as well as adhesive backing. Products meet needs for interior signage, badges, labels, identification plates, and other applications.
Continuous Mixer proportionally blends dry bulk materials.
Vernon, NJ 07462-0009
May 12, 2010
Suited for continuous blending of 2 or more powders, pellets, or flakes, CB1 Blenders include 5 models with feed rates from 150-2,500 ft³/hr. Mixing blade design proportionally blends and mixes different types and varying densities of dry bulk materials fed from volumetric feeders at rate equal to total rates metered by feeders. Construction choices include carbon steel, carbon steel with special coatings, 304 or 316 stainless steel, or other specified materials.
ESD Protection IC is designed for high-speed interconnects.
Lexington, MA 02421
May 12, 2010
Offered in 0.55 mm high, 1 x 2 mm 8-lead microDFN package, compact HSP061-4NY8 delivers IEC61000-4-2 level 4 compliant ESD protection for 2 pairs of gigabit-speed differential data lines. Single device can protect all data lines of HDMI port, entire channel in SATA interfaces, up to and including latest 6 Gbit/sec SATA 3.0 standard, or 2-lane DisplayPort interface. Features include 5.8 GHz bandwidth, low leakage current of 100 nA at 25°C, and ultra low capacitance of 0.6 pF.
Corrosion Preventative contains no VOCs.
Eden Prairie, MN 55344 2138
May 11, 2010
Applied to wet or dry metal surfaces, DRI TOUCH® Non-VOC forms colorless dry-to-touch protective film that resists atmospheric humidity and corrosion. Pale, amber liquid has 248°F flash point and film thickness of 0.15 mil, providing effective coverage of 1,500 sq ft/gal. Rated for 100-150 hr salt spray and 600+ hr humidity protection, DRI TOUCH Non-VOC meets water displacement test Mil-C-16173 and stain test Mil-C-22235A. It can be used without causing air contamination or fire safety problems.
Electrodynamic Vibration Test System is rated to 12,000 lbf.
Thermotron Industries, A Venturedyne, Ltd. Co.
Holland, MI 49423
May 11, 2010
Air cooled and compatible with environmental test chambers, Model DSX-12000 supports payloads up to 1,500 lb and offers velocity up to 115 ips. Shaker features 16 in. dia magnesium armature that produces acceleration levels up to 120 g, and dynamic centering system with optical sensors that ensures armature remains centered during travel. DSX-12000 is controlled by VCS-3200 Vibration Control System, which features over 85 dB of dynamic range and selectable resolution up to 3,200 lines.
Flux Cored Nickel Electrode offers corrosion resistance.
Fort Loramie, OH 45845-0259
May 07, 2010
Available in .045 in. dia, SelectAlloy 622-AP is designed for offshore/marine environments, chemical and power generation equipment, and petroleum refining. Gas-shielded electrode is composed of 21% chromium, 14% molybdenum, 5% iron and 3% tungsten with balance of nickel, and flat, well washed beads are realized with minimal weaving. Electrode is also used for surfacing steel and for joining nickel-based alloys to steel.
(Showing headlines 901 - 920) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195