Owens Corning    Toledo, OH 43659
Apr 07, 2011 XStrand® H Roving, for long-span composite parts manufactured using pultrusion process, is boron-free glass formulation that meets R-Glass standards ISO 2078, ASTM C162, and DIN B1259-1. Providing optimal fatigue resistance for maximum useful life, product was developed for use with polyester, vinyl ester, and epoxy resin systems. It can also be used in acrylic and polyurethane systems to produce structural beams, and products like ladder rails, lighting poles, and telescopic rods.

Select-Arc, Inc.    Fort Loramie, OH 45845-0259
Apr 06, 2011 Composed of nominal weld metal compositions of 30% chromium, 9% nickel, and 0.1% carbon, SelectAlloy 312 and SelectAlloy 312-C produce 2-phase weld metal with substantial ferrite in austenitic matrix. Flux-cored SelectAlloy 312 welds dissimilar metals such as carbon steels to stainless steels high in nickel, while metal-cored SelectAlloy 312-C welds dissimilar metals at elevated speeds. Both gas-shielded electrodes are available in .045 in. and 1/16 in. diameters.

Owens Corning    Toledo, OH 43659
Apr 06, 2011 Compatible with thermoset resin systems and weaving processes, SE1550 is made from Advantex® corrosion-resistant E-CR glass fiber reinforcement. Sizing and chemical binding technology makes roving suited for use in unsaturated polyesters, vinyl esters, and epoxy resins. Fabrics manufactured using SE1550 exhibit optimized mechanical performance as well as performance retention after exposure to moisture. Applications include woven, knitted, and multi-axial fabrics or pre-pregs.

Owens Corning    Toledo, OH 43659
Apr 06, 2011 Made with Advantex® E-CR glass, OC HiLight(TM) features sizing for maximum clarity in architectural applications. Glass content in finished laminates delivers strength and stiffness while minimizing required resin. Translucence is optimized by minimization of white fibers, which avoids air entrapment and reduces light distortion. Formulation optimizes optical quality and light transmission for unsaturated polyester resin panel applications.

Valvoline Co. The, Div., Ashland, Inc.    Lexington, KY 40509
Apr 06, 2011 UltraMax(TM) lubricants include UltraMax TDTO TO-4M fluid with all-temperature protection, eliminating need for seasonal oil changes, and which meets requirements of ZF TE-ML03 for use in ZF torque converter transmissions. Products also include UltraMax Hydraulic Fluid, and UltraMax Transmission and Drive Train Oil that protects against gear wear, rust and corrosion, foaming, and oxidation. All are designed to minimize friction and wear in off-highway engines and equipment.

Solutia, Inc.    Saint Louis, MO 63166
Apr 06, 2011 With uniform neutral gray color and light transmittance of 61%, Vanceva® Ocean Grey interlayer can be used alone or layered with itself or other colors to create varying degrees of transparent, translucent, or opaque grays and rich deep hues of blue, red, and amber. When properly laminated and installed, laminates made with Vanceva Ocean Grey can be produced to meet or exceed architectural regulations for safety glazing applications in indoor and outdoor areas.

Owens Corning    Toledo, OH 43659
Apr 05, 2011 Using corrosion-resistant Advantex® E-CR glass technology, Non-Woven Glass Fiber Veil maximizes cycle lifetime of traditional flooded lead-acid batteries, in particular at partial state of discharge. Veil is applied to face of positive electrode during production, enabling battery to support requirements of stop-start engine systems. Technology also minimizes acid stratification and enables operation in high-temperature environments.

Owens Corning    Toledo, OH 43659
Apr 05, 2011 Designed for polyphenylene sulfide composites, HydroStrand(TM) Chopped Strand Glass Fiber can replace metal in demanding automotive and industrial applications. Product provides mechanical strength and hydrolysis resistance for applications exposed to aggressive high-temperature fluids such as cooling modules, thermostat covers, impellers, and pumps. Hydrolysis resistance help minimize risk of polymer breakdown at temperatures exceeding 266°F.

Pregis Corp.    Deerfield, IL 60015
Apr 01, 2011 At 3/16 in. thick, Falconboard(TM) SR Source Reduced versions of Falconboard(TM) Print and Falconboard(TM) Mount are suited for bracket-based aisle and shelf retail display signage, which typically require thin profiles. Unlike foam board and corrugated, cell structure is not visible, creating aesthetically appealing look. Made from post- and pre-consumer recycled fibers, products are 100% paper-based and recyclable. Standard sheet sizes are 48 x 96, 48 x 120, 60 x 96, and 60 x 120 in.

Electronics Assembly, Henkel Corporation    Irvine, CA 92606
Apr 01, 2011 Ablestik C100 series conductive die attach films include Ablestik C130 formulation with 30 micron thickness and Ablestik C115 with 15 micron thickness. Suitable for use with die sizes ranging from 1 x 1 mm up to 6 x 6 mm for package types including QFNs and QFPs, films provide optimal wetting ability with lower bonding temperature for stable adhesion strength. This enables adhesion against moisture and MSL Level 2 performance on all leadframe surface finishes.

Huron Technologies, Inc.    Leslie, MI 49251
Apr 01, 2011 Providing smooth defect-free parts that replicate fine surface details of mold, Release Coating 7887 offers dry, tack-free surface feel and resistance to scuff and mar. Water-based product maximizes number of parts that can be made before cleaning molds by minimizing build up through blend of wax and silicone. Desired gloss quality can be specified by customer.

Ensinger, Inc.    Washington, PA 15301
Apr 01, 2011 Stock shapes made using chemical-resistant and radiolucent TECATEC series consist of thermoplastic matrix and woven fabric of carbon fiber bundles. TECATEC PEEK CW50 is manufactured using matrix polymer VICTREX® PEEK(TM), which is then compressed with laminated woven carbon fabric mats. Also available, TECATEC PEKK CW60 consists of polyetherketoneketone matrix (PEKK) laminated with 60% carbon fiber fabric. With 165°C glass transition point, PEKK is resistant to steam sterilization cycles.

Welex Inc.    Blue Bell, PA 19422
Mar 31, 2011 Broadening abilities of thermoformers producing form, fill, and seal containers, 9-extruder, 5-layer sheet extrusion system is intended for production of multi-colored striped sheet for thermoformed yogurt cups. It produces sheet up to 60 in. wide, with thicknesses from 0.020-0.060 in., at rate of 3,000 lb/hr. Also able to run PP, mobile-mounted system features color touchscreen control interfaces, x-ray gauging system, and individual roll drive sheet take-off system.

Sugino Corp.    Itasca, IL 60143
Mar 30, 2011 Comprised of 5 modular and fully programmable machines, JET CLEAN CENTER line is designed for precision washing and deburring of simple and complex parts. Products include CLEANRISER automated Millipore patch reading system as well as JCC drying equipment that uses plant or regenerative air or vacuum technology. Depending on machine, common base, stainless steel enclosure, and internal 3-axis module is used to streamline use of part handling automation.

Solvay Advanced Polymers, LLC    Augusta, GA 30916
Mar 30, 2011 Consisting of medium-viscosity resin, KetaSpire® KT-851 NT is for use in melt extrusion-based wire and cable insulation layers, as well as monofilaments, multi-filament fibers, ultra-thin tubing, and films. Semi-crystalline material allows for production of articles that are low in gel content and other particulate contamination. KT-851 NT incorporates trace level of lubricant dusted on pellets to facilitate conveying in extrusion screws, while KT-851 NL is pure polymer with no lubricant.

Metallized Carbon Corp.    Ossining, NY 10562
Mar 29, 2011 Consisting of silver impregnated, carbon-graphite material, Silver Metcar is suited for DC motor brushes, non-welding electrical contacts, and rotary slip ring brushes used in ships, aircraft, and rail systems that require low electronic interference. Carbon-graphite material delivers self-lubricating properties, while pure silver provides constant electrical conductivity. Corrosion-resistant material cannot melt or weld to another metal surface, but can be silver plated for soldering.

Dow Corning Corp.    Midland, MI 48686 0994
Mar 29, 2011 Dow Corning® 87 and 88 create hydrophobic silicone network in paint that repels water but is permeable to water vapor coming from substrate. Consisting of silicone resin emulsion for waterborne paints, Dow Corning® 87 encourages water beading. When water reduction is primary requirement, Dow Corning® 88, consisting of silane/siloxane blend, can be used in acrylic emulsion paints containing polar solvents and in solvent-based systems. Both are low-VOC, solvent-free, and APEO-free.

Syrris Ltd.    Royston SG8 5HW  United Kingdom
Mar 25, 2011 Offering temperature range of -90 to +250°C and pressure range of 50 mbar to 3 bar, Globe Reactor System enables vessels from 50 mL to 5 L to use common clamp, lid, circulator, and stand. Spring loaded outlet valve eliminates occurrence of leaks, even at temperature and pressure extremes. Available as single, or vacuum jacketed with wide range of stirring options, Globe can be upgraded using Globe Reactor Master for full automation and data logging, or Syringe Pump for automated reagent dosing.

OptiPro Systems    Ontario, NY 14519
Mar 25, 2011 Suited for low, medium, and high volume production of precision optics, PRO 80 Series includes PRO 80G Grinder or GTS with twin-spindle option, PRO 80P spherical polisher, and PRO 80UFF Ultraform Finishing machine for aspheres. Systems are designed with vibration isolated granite core for thermal stability and part-to-part accuracy. Measuring 39.4 x 59.1 x 82.2 in., PRO 80 Series comes equipped with Fagor 8070 CNC machine control with LCD touchscreen monitor.

GE Co.    Southfield, MI 48034
Mar 25, 2011 Helping to optimize desalter performance, Embreak® breakers also help oil refineries reduce nonylphenol ethoxylates. Oil soluble demulsifiers improve crude oil dehydration, salt removal, and effluent brine quality in electrical desalters and similar process equipment. Specifically, breakers dehydrate difficult to treat, light- to medium-gravity crude oils. Resulting process improvements include ability to run at lower injection rates while effectively separating water from oil.