Teknor Apex Co.    Pawtucket, RI 02861
May 11, 2011 FDA-compliant Terraloy(TM) BP-34001 features compounded formula that overcomes inverse relationship between heat distortion temperature (HDT) and Izod impact strength in polylactic acid (PLA). In property tests, typical grade Terraloy BP-34001D exhibits heat distortion temperature of 112°C and Izod impact strength of 135 J/m. Compound complies with FDA 21 CFR requirements, has renewable content of 78%, and features base polymers of Ingeo® resins as supplied by NatureWorks LLC.

KVA Stainless Incorporated    Escondido, CA 92029-1303
May 11, 2011 Hardened KVA MS2(TM) (martensitic stainless steel) helps automakers meet vehicle crash and safety requirements while reducing overall curb weight and increasing gas mileage. Able to be readily implemented with conventional manufacturing equipment, material can be formed and trimmed using traditional stamping lines. Also, properties allow for successful welding and thermal processing without distortion or loss of strength.

Foster West Corporation    Putnam, CT 06260
May 10, 2011 NanoMed® EX compounds are manufactured using particles with dimensions of less than one nanometer, which are dispersed throughout Pebax polymer based matrix. Suitable for cardiovascular and neurovascular catheter applications, high-flexibility resins are also designed for catheter extrusion processing, where small diameters, thin walls, tight tolerances, and smooth surfaces are required. Resins can be tailored to achieve stiffness and elongation properties for specific devices.

CeramTec North America Corp.    Laurens, SC 29360
May 09, 2011 Exhibiting uniform thermal conductivity and expansion in all directions, Alunit® allows rod-shaped bodies and tube systems made of ceramic to possess optimal mechanical stability and dielectric strength. Aluminum nitride extrusion features thermal expansion coefficient of approximately 4 ppm/K and high heat conductivity of greater than or equal to 170 W/mK, making it suitable for high-power electronic applications.

Honeywell International, Inc.    Morristown, NJ 07960
May 09, 2011 Made from ultra-high-molecular-weight polyethylene using gel-spinning process, ultra-thin Spectra® Fiber enables smooth casts and optimal line sensitivity to fish bites. Product is resistant to chemicals, UV light, abrasion, and stretching, extending life of fishing lines. Spectra Fiber is also suitable for rope and lifting slings, mooring lines, hurricane-resistant panels for windows and doors, sail cloth, and security netting.

Solvay Advanced Polymers, LLC    Augusta, GA 30916
May 09, 2011 Offered as alternative to polyetheretherketone (PEEK(TM)), AvaSpire® AV-630 polyaryletherketone (PAEK) is designed for extrusion of ultra-thin film to thicknesses as low as 6 microns. Ductility promotes puncture resistance, which enhances handling in manufacturing operations. In addition to mechanical properties along both flow and transverse directions that exhibit increased consistency/uniformity, material also offers optimized heat deflection temperature (HDT) and flammability resistance.

UV III Systems, Inc.    Alburg, VT 05440
May 06, 2011 Customizable to suit user requirements, Handheld High Output Ultraviolet Curing Systems offer one-button operation and are available in 120 or 240 V versions to cure all standard UV coatings. Systems are computer independent, minimizing number of moving parts and need for maintenance. Replacement bulbs can be installed in minutes.

Daimer Industries Inc    Woburn, MA 01801
May 05, 2011 Collectively comprising 8 machines with Long Hose Technology (LHT), Vapor-Flo® 8200 and 8300 series let users clean with hose-connected trigger wands up to 299 ft from pump/base unit and electrical source. Mobile and stationary versions of these 230 V, top-loading pressure washers support user-accessible refill tank and are rated for pressures to 1,700 psi. Respectively, 8200 and 8300 series support water-flows to 0.4 and 0.6 gpm and clean at temperatures to 205°F and 175°F.

Hobart Brothers Co.    Troy, OH 45373-2900
May 05, 2011 Tri-Mark® TM-811N1 and TM-811N2 are gas-shielded, flux-cored welding wires designed to improve weldability and productivity on out-of-position welding applications. To promote good CVN (Charpy V-notch) impact values at low temperature, TM-811N1 and TM-811N2 offer respective weld deposits of 1% and 2% nickel. Both offer stable arc and flat bead profile that provide consistent weld quality and minimize rework, while spatter, freezing, and slag characteristics reduce post-weld cleanup.

Industrial Conveying (Aust) Pty Ltd    Victoria 3552  Australia
May 04, 2011 Featuring adjustable supports, modular pallet conveyor sections can be assembled in any configuration to meet application needs. Products include 2- and 3-chain conveyors, powered roller conveyors, and transfers suited for use with Australian Standard pallets for weights up to 1,200 kg. Standard sections are assembled in 1.5, 3.0, 4.5, and 6.0 m lengths, and non-standard lengths, widths, and loads are also available. Drive units can be fitted with shaft-mounted external or internal motor.

Robert Bosch GmbH    Waiblingen D-71332  Germany
May 04, 2011 Featuring BDK 2000 A continuous dosing system and BZK 1000 B crystallizer, Chewy Candy Production Line produces sugar-glucose syrup solution without water. TurboMixx mixing system achieves homogenous mix by dissolving sugar into glucose syrup. For dosing precision, line includes gravimetric system with load cells and flow meter. Subsequent dissolving process in Rapidsolver heat exchanger guarantees crystal-free solution, which also allows production to be stopped/started without product loss.

Reduction Engineering    Kent, OH 44240
May 03, 2011 Offered with straight and offset arm configurations, Carrossel features round-shape oven with no dead space and reverse air re-circulation. Efficiency is improved by balancing recirculation fan, exhaust fan, and burner position controlled by PID program, reducing gas consumption and cycle time. Oven, pre-cooling, cooling, unloading, and loading stations promote production versatility, and operator can make adjustments at different times on each of 3 arms for process optimization.

Aremco Products, Inc.    Valley Cottage, NY 10989
May 03, 2011 Intended for potting and encapsulating in electrical and electronic applications, Aremco-Bond(TM) 2315 provides flexural strength of 12,300 psi, volume resistivity of 1.0 x 10¹⁵, and dielectric strength of 480 V/mil. Black-pigmented, thermally conductive product offers resistance to acids, alkalis, organic fluids, and salts. Featuring mixed ratio of 100 parts resin to 25 parts hardener by weight, Aremco-Bond 2315 cures in 2 hours at 160°F plus 2 hours at 300°F.

Mole·Master Services Corp.    Marietta, OH 45750
May 02, 2011 Providing 100% coverage of vessel's interior walls from original set-up position, Junior(TM) 360° is available with JR360H hydraulic cutting head or JR360P pneumatic cutting head, both with interchangeable blades, flails, or chain cutters to safely remove variety of materials. Chain cutter, or whip mounts, swivel into hydraulic cutting head to keep overall diameter to 5 in., enabling use in small flow channels. Hydraulically assisted section boom adapts to different size vessels.

Argotec, Inc.    Greenfield, MA 01302
May 02, 2011 Offering alternative for frame-type wound dressing and surgical drape markets, ArgoMedPLUS® 18411 thermoplastic polyurethane (TPU) film-on-paper product offer optimized peel release values. Product combines ArgoMed 18411 waterproof-breathable, aromatic-polyether, TPU film with 80 lb SCK paper that is coated on one side with polykote and silicone on other. Wound dressings made with this product promote patient comfort via stretch and recovery and moisture-vapor-transmission rates.

ACPO, Ltd.    Oak Harbor, OH 43449
Apr 27, 2011 Constructed with 1 mil matte biaxially oriented polypropylene film and .5 mil water emulsion acrylic adhesive, 531T PSA roll label film provides label surface protection and thermal transfer printability for variable data on pre-printed labels. Linerless product has low-glare surface that facilitates barcode scanning, and also offers acid, chemical, and oil resistance.

Henkel Corporation    Rocky Hill, CT 06067
Apr 26, 2011 Compatible with lead-free and tin-lead processes, Multicore MF210 offers pre-heat temperature of 80-130°C and 1-3 sec contact time on wave, delivering sustained activity without resin. Activity capability helps minimize solder microballing by optimizing coalescence and limiting stray particles around solder joint. Supporting single- and dual-wave processes with no degradation in activity, halide-free formulation is effective with solder resists as well as rosin and OSP-based protectants.

American Standard Circuits, Inc.    West Chicago, IL 60185
Apr 26, 2011 Electrasil-3 utilizes thin film or screen printed paste to efficiently transfer heat from ground plane of PCB to heat sink, so that electronic components do not heat up while functioning. Bonding PCB to heat sink, silicone-based elastomer is thermally and electrically conductive, and also has high bond strength and resistance to thermal shock.

Surface Guard, Inc.    Aurora, IL 60504
Apr 25, 2011 Designed to provide temporary protection of high gloss, smooth or textured polycarbonates and plastics, Surface Guard® 62 exhibits high tack to provide surface protection during processing, assembly, and shipping, while low peel value provides smooth and silent removal when protection is no longer necessary. It is available in 1-80 in. widths, in rolls up to 15,000 ft., on 1.5 mil linear low density or 2.0 mil low density polyethylene clear and tinted films, with optional printing.

EoPlex Technologies, Inc.    Redwood City, CA 94063
Apr 25, 2011 Comprised of sintered metal array of wire bond and die attach pads delivered on temporary thin metal strip, xLC(TM) substrate enables packaging companies to produce Quad Flat No Lead (QFN) semiconductor packages with hundreds of leads and multiple rows. This direct replacement for leadframe is completely compatible with all QFN processing and enables packages to be made with as many rows as needed. All excess metal in conventional leadframe is eliminated, along with polyimide tape.