Anomet Products, Inc.    Shrewsbury, MA 01545
Jan 29, 2002 Metallurgically bonded platinum- or nickel-clad molybdenum wire provides low coefficient of thermal expansion at temperatures up to 1,200°C. Platinum clad wire is available from 0.010 to 0.060 in. OD with claddings ranging from 14-38% by weight and from 4.5 to 55 microns, depending upon dia. For less corrosive environments, nickel-clad molybdenum wire is available. Spools, coils, and straight lengths are offered.

Rogers Corporation    Rogers, CT 06263 0188
Jan 29, 2002 PORON(R) Urethane foams are low outgassing and demonstrate resistance to compression set. They are available in thin and soft materials cast on PET film, ideal for cushions and seals in small portable electronic devices. V-0 and HF-1 rated, BISCO(TM) Silicone foams retain integrity after long periods under compression and can withstand temperature to 400 deg F. Polyolefin foams are silane, cross-linked foams made from single-site, catalyzed olefin resins.

Graco Inc.    Minneapolis, MN 55440
Jan 28, 2002 Air-operated Pro Xs electrostatic guns have internal power supply that provides electrostatic power without external electrical connections or voltage cables. They have built-in smart display with voltage and current readout at gun, adjustable voltage at gun, and indexing air cap that is easy to align for consistent spraying. Manual and automatic air spray and air-assist spray guns are available, all with FM, CENELEC, CSA, and CE approvals.

Saint-Gobain Performance Plastics, Attachment Tapes, Sealants & Gaskets    Granville, NY 12832-1699
Jan 22, 2002 Lo-Skid high-density polyurethane provides high coefficient of friction even on slick surfaces, making it suitable for bumpers and footpads on electronic equipment and housewares. Abrasion resistant material will not mar desk or counter tops. It is firm enough to allow intricate die-cuts, but remains flexible. Foam is available without adhesive or with adhesive on one side, in gauges from 0.016 to 0.125 in.

Chomerics, Div. Of Parker Hannifin Corp.    Woburn, MA 01888-4014
Jan 22, 2002 Thermflow T766 provides low thermal resistance interface path between hot components and heat sinks, allowing easy removal of sinks for rework operations. Foil layer lets heat sinks be removed without force and without leaving residue. Material consists of tacky, electrically non-conductive phase-change film on one side of highly conformable metal foil. Film attaches to heat sinks or spreaders and is protected by foil layer during assembly.

E-A-R Specialty Composites    Indianapolis, IN 46268 1650
Jan 22, 2002 Used as shock pads, spacers or snubbers, energy-absorbent CONFOR foams help protect hard disk drives, miniaturized computers, hand-held electronics and PDAs from shock and vibration, with no silicone off-gassing. Semi-open celled foams also provide acoustical insulation. CF-40E low-stiffness formulation and CF-45E medium stiffness formulation meet HF-1 of Underwriter's Laboratory's UL94 flame standards at 2mm and 2.5mm thicknesses.

Internation Surface Preparation Corp.    Fresno, TX 77545
Jan 17, 2002 Accustrip System® works with sodium bicarbonate blast media, and is safe for use on brick, limestone, concrete, granite, metal, glass, and tiles. Abrasive blasting system is suitable for graffiti removal, cleaning, degreasing, general maintenance, depainting, deodorizing, and other surface preparation. Nozzles are available for applications ranging from stripping delicate substrates and cleaning applications to paint stripping and corrosion removal.

Slide Products, Inc.    Wheeling, IL 60090
Jan 17, 2002 Utilizing reactive chemistry, NuPurge Technology (NPT) Compound performs at all temperatures between 160 and 600 deg F. It consists of concentrated purge pellets that react chemically to heat, quickly cleaning machinery without extra soak time. NPT requires no mixing or preparation. It is non-hazardous, FDA compliant and free of harsh odors.

RBP Chemical Technology, Inc.    Milwaukee, WI 53214 0069
Jan 17, 2002 UNITROL 924 PLUS one-step acidic fountain concentrate contains additional wetting agents to eliminate ink feedback, chelating agents to control calcium related problems and desensitizers to maintain optimum ink and water balance. It is buffered for pH stability and requires no alcohol or alcohol replacers.

Fusion UV Systems, Inc.    Gaithersburg, MD 20878
Jan 17, 2002 Six inch Light Hammer 6 consists of 2 modular components: microwave-irradiator and solid-state power supply. Electrode-less bulb, mounted in elliptical reflector, focuses intense strip of light 2.1 in. below surface of lamp. System repeatedly cycles from high power to very low power over a few seconds. Power output from 25 to 100 percent is controlled from front panel or remotely through analog signal or contact closure.

Fusion UV Systems, Inc.    Gaithersburg, MD 20878
Jan 17, 2002 PowerCure(TM) 3, three in., microwave-powered lamp system operates in 250 watts/in. power class. It can be used in focused (10mm) or out-of focused distances, fits into X-Y tables, and requires minimal amounts of air for positive pressure cooling. PowerCure 3 is available with D-bulb, and achieves rapid startup using technology that does not require separate igniter bulb. Full cure width and consistent output is maintained throughout bulb's life.

Tuthill Transport Technologies    Springfield, MO 65801
Jan 11, 2002 Suitable for Class 6 and 7 vocational trucks with single drive axles, 79AR drive axle air ride suspension offers GAWR (gross axle weight ratings) of 17,000 to 23,000 lb per axle. Kits are available for Kenworth, Peterbilt, Freightliner, Western Star, Mack and Sterling models, but it can be adapted to any truck with standard-dimension frame rails. Kit includes hangers, axle connections, torque arms, bushings and hardware.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Jan 11, 2002 Model 999 extended pressure-blast system, with added weight capacity and component-handling facilities, is designed for blast treatment of large tube and pipe fabrications. Its 48 x 48 x 144 in. work envelope is fitted with multiple blast nozzles that can be used from each of 6 operator workstations. Cabinet is equipped with track extension and transfer cart that moves by means of ball screw-ball nut mechanism driven by electric gear motor.

Kent Elastomer Products    Kent, OH 44240
Jan 11, 2002 K-911 formulation blocks ozone gases and ultra-violet light that can degrade tubing over time through cracking and other damage. It assures that tubing will keep natural smooth appearance and feel with minimal fading. Formula reduces cracking around fittings, and provides gas and vapor permeability, chemical resistance, and weather resistance.

Hytrol Conveyor Co., Inc.    Jonesboro, AR 72401
Jan 08, 2002 Model 25-CREZD roll-to-roll accumulation conveyor combines intelligence of EZLogic Accumulation system with efficiency of EZ Drive System, which eliminates many mechanical components. Accumulation zones range from 30 to 120 in. in length, each of which contains a drive. Drive is turned off when there are no pallets present or when pallets are accumulated.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jan 07, 2002 Loctite® Multicore® 63S4 RP15 phased-reflow, no clean solder paste is formulated with 63S4 alloy. 63S4 alloy blends SN63 and SN62, with melting points of 183°C and 179°C respectively. In phased reflow process, small amounts of SN62 wets both sides of termination before SN63's melting point is reached, tack-soldering components to PCB, and delivering larger assembly process windows.

Batson, Louis P., Inc.    Greenville, SC 29608
Jan 04, 2002 IT Series robots can be mounted on injection molding machines from 50 to 550 tons with vertical stroke requirements of 650 to 1000 mm. Traverse stroke ranges between 1200 and 1500 mm, and payload ranges between 10 and 20 lbs. ITW Series robots have telescoping arms, and can be mounted on 50-850 tons with vertical stroke requirements of 700 to 1700 mm. Traverse stroke ranges between 1200 and 2000 mm, and payload ranges between 10 and 27 lbs.

National-Spencer, Inc.    Wichita, KS 67201 0057
Jan 02, 2002 Model PW-005 Zee Line Parts Washer removes particles, soil, or other impurities from mechanical parts. It has capacity of 5 gal, solvent capacity of 3-1/2 gal, and fusible link steel cover that closes automatically in event of flash fire.

Rogers Corporation    Rogers, CT 06263 0188
Jan 02, 2002 ZYVEX(TM) liquid crystalline polymer circuit material is designed for high performance electronics where high frequency, chemical resistance, and fine line high density interconnect (HDI) requirements are critical. ZYVEX TeraClad meets industry requirements for low/stable dielectric constant, low/stable dielectric loss, extremely low moisture absorption, high chemical resistance, matched in-plane CTE, and dimensional stability.

Petro-Canada Lubricants    Mississauga, ON L5J 2Y3  Canada
Jan 02, 2002 Hydrex and Environ fluids provide anti-wear protection, and both provide stability under thermal oxidative stress, extend service life, and reduce total wear in plant or mobile hydraulic systems and component parts. Both meet OEM requirements for oxidation stability, shear stability and wear protection. Environ is formulated for use where there are environmental, health, and safety concerns.