Materials & Material Processing
(Showing headlines 3441 - 3460) << 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 ...
Hosedown Station provides vortex scouring action.
Spirax Sarco, Inc.
Blythewood, SC 29016
Mar 21, 2003 STVM Silent Type Vortex Mixing Hosedown Station provides instantaneous, temperature-controlled hot water by blending steam and cold water. Thermal element automatically shuts off steam flow if hot water temperature exceeds temperature set point by 15°F. Vortex scouring action helps prevent scaling. Water pressures range from 20â€“110 psig and steam pressures range from 40â€“150 psig. Model V150 produces water from ambient to 150°F and Model V180 produces water to 185°F.
Permanent Concrete Patch repairs surfaces in under one hour.
Cleveland, OH 44135 0311
Mar 20, 2003 QWIK-PATCH hardens for light use in 15 min and is ready for heavy traffic in 45 min, even in damp, humid, or freezing conditions. With twice the compressive strength of normal concrete, product may be used to patch any indoor or outdoor contained surface. Needing no primer or binders, product comes in 45 lb units that will patch 36 ft˛, 1/8 in. thick. Trowel and mixing pail are included. Applications include refrigerated rooms, loading docks, drives, and ramps.
Aerosol Cleaner works on PCBs and printed wire assemblies.
HumiSeal Div. of Chase Corp.
Woodside, NY 11377 9841
Mar 20, 2003 CircuitKleenâ„˘ 104 cleaner and defluxer replaces similar products containing HCFC-141b. It rapidly removes oils, grease, silicones, dirt, flux residues, and other contaminants. Product is non-flammable, non-ozone depleting, non-corrosive, safe on most plastics, and leaves zero residue while evaporating rapidly. CircuitKleenâ„˘ 104 formula cleans all types of switches, relays, contact pads, and electrical connections.
Sieve Shaker is suitable for 12 in. sieves.
Irvine, CA 92614
Mar 14, 2003
Based on silent, maintenance-free, electromagnetic drive, model AS 300 accepts up to 8 sieves with 12 in. dia and 2 in. height. Able to pan and precisely fractionate up to 6 kgs of sample, product digitally controls time, amplitude, and interval parameters and can save up to 9 combinations for routine sieving processes. Unit can be switched to acceleration mode and includes interface for integration within sieving processes controlled through EasySieve® software.
Aqueous Parts Cleaner provides environmental compliance.
Palatine, IL 60067-9910
Mar 13, 2003 Thermo-Kleenâ„˘ HPC Water-Based Parts Cleaning System offers programmable temperature controls with ±1° accuracy; automatic low-water, high-temperature shutoffs; self-diagnostic programs; and ETL certification. Sink-on-drum Model 90 features stainless steel sink and is suitable for cleaning small number of parts with light to medium soil levels. Vat-style Model 91 handles larger parts and higher volumes, and offers soaking and scrubbing actions.
UV Curing Unit provides variable-wattage, cool curing.
A.W.T. World Trade, Inc.
Chicago, IL 60641
Mar 13, 2003 Accu-Cureâ„˘, with computer-designed cooling system, minimizes level of heat transmitted to stock in curing chamber. Operators adjust gate height on curing head module according to stock thickness, eliminating light leakage. Due to variable position wattage selection of 300, 200, or 100 W, users can also adjust lamp output to conditions. Ozone Removal System safely vents ozone and hot air, while light guards protect against UV and visible band light and absorb lamp heat.
Solder Paste suits high speed printing processes.
Henkel Loctite Corporation
Rocky Hill, CT 06067
Mar 13, 2003
Lead-free, no-clean Multicore® LF300 provides high resistance to slump and solder balling. Clear residues are pin probable for improved in-circuit test performance. Paste is optimized for small to medium size boards at nominal 240-245°C temperatures. Reflow profiles may be extended with nitrogen. Typical applications include mobile phones, PDA assemblies, remote control devices, keyless entry devices, and 0.4 mm pitch packages.
Injection Molding Machine has 3.5 sec total cycle time.
Cincinnati, OH 45206
Mar 13, 2003
Model K-TEC 155 S, with hybrid drive and 1550 kN clamping force, is equipped with hydraulics and electric plasticizing drive. Automation system utilizes Heli-U 1700 clean-room robot, which inserts labels into 4-cavity mold that is directly injected over with thin-walled PP container. Extraction of container and insertion of new label occur in parallel during mold opening time of 0.9 sec. Compact design provides unobstructed access on three sides of clamp.
Turning-Stack System produces multi-component parts quickly.
Cincinnati, OH 45206
Mar 13, 2003
Turning-Stack System is based on rotary cube with 4 equal mold faces, arranged between platens of injection molding machine. After mold opens, pre-injected piece is held on cube and turned in steps of 90°. On 2 inactive sides of cube, other operations can be carried out simultaneous with injection process. Cube design eliminates asymmetrical forces on platens. Depending on mold size and weight, full 90° turn requires 0.4-0.8 sec.
Inline Mixer uses disposable mix elements.
Liquid Control Corp.
North Canton, OH 44720
Mar 12, 2003 Able to perform low-pressure processing without use of solvent flushing, ParaDyne is equipped with non-drip feature that minimizes mixed material dripping during indexing sequence. Pull- or snuff-back action decompresses mixer chamber and holds material inside mixer until mix head can be indexed to next part. Product incorporates 2-component mix head that utilizes servo, hydraulic, or air-driven motors. Optimal mix occurs when unit is set at 2,000â€“5,000 rpm.
Two-Part Silicone Compound suits electronic applications.
Carpinteria, CA 93013
Mar 12, 2003 Able to maintain electrical conductivity from -178 to +445°F, R-2634 electrically conductive, room-temperature vulcanized (RTV) paste achieves full cure at 77°F in 7 days. With heat-accelerated cure time of 30 min, R-2940 thermally conductive, RTV paste performs over -85 to +465°F temperature range. Operating over -178 to +465°F temperature range, CFI-6755 optically clear, RTV liquid elastomer achieves full cure (heat-accelerated) in 10 min.
Additives improve molded goods, coatings, and adhesives.
Houston, TX 77084
Mar 12, 2003 INHANCEâ„˘ performance additives consist of surface-modified particles based on ultrahigh molecular weight polyethylene (UHMW PE), high-density polyethylene (HDPE), and titanium carbide polymer alloys, and surface-modified fibers based on aramid and HDPE. Process creates polar functional groups on surfaces of products, enabling users to combine normally incompatible materials to form unique composite compounds with desirable properties.
Thermoformable Type 6 Nylon comes in coils and sheets.
Penn Fibre/Delaware Div.
Greenwood, DE 19950
Mar 12, 2003 Pennite 4508 impact modified, branched polyamide 6 contains 15% glass fiber. Material is heat-aging stabilized and colored black for service. Continuous service temperature is rated at 284°F with short-term peak performance at 338°F. Product is available in coils from .010â€“.093 in. thick and in sheets from .031â€“.250 in. thick with widths to 48 in. It is suitable for thermoformed high-heat and under-hood applications for engine shrouds, ducts, and covers.
Dowel Bushings suit large bolting applications.
Spirol International Corp.
Danielson, CT 06239 1434
Mar 12, 2003 Dowel Bushings align mating components and provide ID clearance hole for bolt, eliminating need for separate dowel hole. Spring Dowels align mating components when bolt must be located in separate location. Both products protect bolts from shear loading that will cause premature failure of bolt. Sizes are available for use with 5/8 in., 3/4 in., 14 mm, and 16 mm bolt sizes. They are made of heat-treated, high-carbon spring steel.
Mold Release/Conditioner has zero VOC content.
Chagrin Falls, OH 44023 5296
Mar 07, 2003 Non-carcinogenic, odorless SafeSlickâ„˘ blended boron compound is non-toxic and non-flammable and complies with SPI's environmental, health, and safety policy. Used as release agent in high-temperature/pressure applications, it is non-silicone, non-oil, non-conductive, and non-reactive. Product can applied via spray system, brush, wipe, or sponge, drying to 2â€“10 micron, semi-permanent layer. As mold conditioner, product seasons molds at start-up and extends life of molds.
Static Eliminator is suited for confined spaces.
Cincinnati, OH 45249-1621
Mar 05, 2003
Effective up to 20 ft away, 3 in. Super Ion Air Knife removes static electricity from plastics, webs, printed materials, and other product surfaces where dust, tearing, jamming, or hazardous shocks pose problems. It produces laminar sheet of airflow that floods area or surface with static-eliminating ions. Operating at noise levels of 50 dBA, it offers adjustable force and requires less than 1 scfm of compressed air at 5 psig for normal operation.
High Pressure Laminates are offered in granite designs.
Matthews, NC 28104
Mar 05, 2003
Ranging from grays and greens to corals and pinks, Bravissimo!(TM) granite high pressure laminate (HPL) collection includes 5 designs for residential countertops. Wear-resistant surface does not have brown line associated with fabricated laminate edges. Molding is available in 12 ft lengths.
Injection Molding Machines provide mold protection software.
Cincinnati, OH 45206
Mar 05, 2003
Mold Guard and Ejector Guard software, for Powerline injection molding machines, compare measured clamp and ejector forces to established force reference curves padded with alarm band. Programs stop component forward movement if measured force exceeds alarm band limits, preventing mold damage and premature mold wear. Both programs are ON/OFF selectable, and automatically compensate for force increases due to changes over time from friction or temperature.
Ink Module works on single or dual press consoles.
Tobias Associates, Inc.
Ivyland, PA 18974 1433
Mar 05, 2003 TA-RIM remote ink module replacement is for use with Harris Telecolor I press console. Design allows for faster ink settings and assists in zeroing fountains. TouchConsole user interface allows pressmen to operate system without manual. TA-RIM may be coupled with EPLEX Press Presetting System to enable older version presses to be preset using CIP3 digital information.
Copper Alloy copes with demanding applications.
Brush Wellman Inc.
Cleveland, OH 44110 2602
Mar 04, 2003 ToughMet® consists of spinodal alloy of copper with 15% nickel and 8% tin. It exhibits stength 3 times greater than copper, yet possesses tribological properties comparable to bronze. Inherent lubricity means that bushings are unlikely to fail even if starved of lubricant. ToughMet is suitable for low speed, high load and high speed, low load applications, with continuous rotary or reciprocating motion. It eliminates galling, overheating, contamination, and bearing corrosion.
(Showing headlines 3441 - 3460) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195