Philadelphia Mixing Solutions    Palmyra, PA 17078 9518
Jun 07, 2004 Sentinelâ„¢ Impeller features wide, large-diameter blades for high flow and uniform distribution of shear throughout mixing process. Fully welded and bolted designs are available with different coatings and surface finishes to meet mixing specifications. Clean-in-place impeller is suited for applications where fluid motion is required to suspend solids, dispense gas, or blend fluids in high-flow, low-shear process.

Diamond America Corp.    Tallmadge, OH 44278
Jun 07, 2004 Single-screw thermoplastic extruders incorporate Easy Close Hopper Slide to stop flow of materials to extruder screw during set-up, changeover, or shut-down. This ensures that pellets will not flow outside of machine, resulting in cleaner plant, less waste, and safer environment. Positioned between feed throat of extruder and hopper, slide employs auxiliary material channel that directs excess material into barrel of extruder.

Master Bond, Inc.    Hackensack, NJ 07601
Jun 04, 2004 Two-component, epoxy-sealing EP110F6, for potting, encapsulation, and casting, has 1–2 mix ratio by weight and cures upon exposure to elevated temperatures. It provides electrical insulation and resists thermal cycling and shock. Medium-viscosity liquid passes Navy Hex Bar Test, MILI-16923C, consisting of 10 cycles from -55 to +155°C. It resists chemicals and adheres to wide range of substrates. It is typically cured in 3-5 hr at 125°C.

Sealed Air Corp., Engineered Products Div.    Danbury, CT 06810
Jun 02, 2004 Once dispensed from SpeedyPacker® foam-in-bag, Instapackerâ„¢ Tabletop foam-in-bag, or 900 Series hand-held packaging system, Instapak® GFlex® QS foam continues expansion process and conforms to shape of product placed in carton. It accommodates variety of products that require multiple impact protection during shipping.

Almco, Inc.    Albert Lea, MN 56007 2751
Jun 01, 2004 Model PWRB9-36EU features 9 in. wide flat wire belt, rinse and blow-off capabilities, and U-bend design that allows single operator to load and unload parts from one location. Heated cleaning solution is sprayed from multiple adjustable nozzles at top, bottom, and sides of 36 in. long cleaning chamber. Built-in cyclonic filtration equipment provides recycling of liquids for reuse and for environmentally safe disposal of solid particles and floating matter.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
May 26, 2004 Measuring 34 x 36 in., Model RXS-400 provides shot peening, deburring, descaling, cosmetic finishing, and technical surface preparation. Two sealed and abrasion-protected ball bearing spindles are mounted on rotary table. Component-holding fixtures that are interchangeable can be secured on each spindle. As component rotates at controlled and adjustable speed, it is exposed to blast from multiple nozzles that are pre-positioned at correct angles and distances.

Philadelphia Mixing Solutions    Palmyra, PA 17078 9518
May 26, 2004 Mixer Caddy(TM) offers safe, portable batch mixing of tanks or totes. It meets most container specs and handles portable mixers from ¼-5 hp, eliminating need for dedicated mixers at each tank or tote. Made from welded steel tube, unit has onboard hand-crank winch capable of lifting up to 500 lb, and locking pins to ensure proper mixer alignment and position. Orange safety paint and safety end caps ensure high visibility and operator safety.

Boekel Industries, Inc.    Feasterville, PA 19053
May 25, 2004 Offered with accessories to accommodate various laboratory containers and apparatus, Grant-Bio mixing equipment includes combined centrifuge/vortex mixers, mini vortex mixer, and series of rockers, rotators, and shakers. All are engineered to provide consistent mixing and agitation conditions to protect sensitive samples. They offer programmable features and operate reliably in variable temperature environments.

Cole Static Control, Inc.    Akron, OH 44319
May 21, 2004 With effective range of 6–10 ft, Model 1526 pulsed DC controller and static elimination bars are used for ionizing and dust control where air may be necessary to reach static-prone areas. Manufactured in lengths to 144 in., bar may be controlled to emit 50% of positive and negative ions or adjusted so only one polarity of ions comes from bar. Ion pulse rate is also variable, and unit can be mounted over manufacturing equipment or benchtops.

Sensor Products Inc.    Madison, NJ 07940
May 21, 2004 Encasing Service for Tactical Pressure Sensor Film enables its use in environments with high-moisture content, oil, solvents, and other contaminants. Pressurex® TPSF enables measurement of contact pressure from 2-3,037 kg/cm². Long strips of TPSF can be encased, for use in nip roller contact tests in large flexo, converting, or packaging applications.

Boekel Industries, Inc.    Feasterville, PA 19053
May 20, 2004 Operating in temperatures from 4–55°C, Orbitron III accepts different sized containers, simultaneously, without need for racks or clamps. It provides removable mats for easy cleaning and is available with optional 8 in. trays and 12 in. square double stacking tray. Product has variable speed range of 6–125 orbits/min, load range up to 20 lb, and adjustable timer for up to 12 hr.

Sarva Bio Remed LLC    Trenton, NJ 08608
May 19, 2004 SpillRemed provides safe, environmentally friendly, on-site remediation of accidental oil spills in commercial, industrial, and residential buildings. No removal of soil or water is necessary to achieve successful clean up. Product uses cultures of indigenous populations of oil degrading bacteria to effectively dissipate fuel oil. No genetically modified organisms are released in treatment process.

Wilmington Machinery, Inc.    Wilmington, NC 28406 7308
May 19, 2004 With 4,500 lb/hr of barrier extrusion capacity, Series III 60-cavity blow molding system combines 6-layer coextrusion, all electro-mechanical clamp systems, and bottle handling capabilities. Rotary machine consists of wheel system with output and cavitation sized for few thousand to over 20,000 bottles/hr, with any material or layer configuration. In-mold labeling, dehumidification, and customized takeout systems are included.

IKA Works, Inc.    Wilmington, NC 28405-7419
May 17, 2004 Model MHD provides single-step incorporation and dispersing of solids into liquids. It can be combined with solids feeder, bulk bag unloader, and other equipment to create complete turnkey system for continuous processing. Mixer processes solids concentrations up to 90% as well as extremely viscous liquids. Available in 6 sizes, mixer offers powder feed rates up to 25,000 lb per hour, and nominal liquid flow rates as high as 175 gpm.

Stoody Co.    Chesterfield, MO 63017
May 17, 2004 Stoody® 625, 182, 82, and A grades of flux cored nickel wires achieve welds in vertical-up position. Available in both .045 and 1/16 in. diameter, wires are packaged on 33 lb wire baskets. Welders can choose between running 75% argon, 25% CO₂, or straight CO₂.

Littelfuse, Inc.    Des Plaines, IL 60016
May 13, 2004 PulseGuard® Series PGB1 ESD Suppressors are RoHS compliant and compatible with high temperature reflow cycles. They offer ESD protection on high-speed signals such as HDMI, DVI, USB 2.0, and FireWire. With capacitance of 0.055 picofarads and ESD event response time of less than 1 nanosecond, units offer protection without waveform distortion. All devices are compatible with lead-free manufacturing processes.

Union Process, Inc.    Akron, OH 44313
May 13, 2004 Model DMQ-05 small media, ½-liter tank-sized mill utilizes Delta discs, eliminating shaft whip and mill vibration. Discs are indexed to provide directed and uniform media distribution throughout mill chamber. Ring screens can be adjusted to accommodate use of grinding media from 1 mm to as small as .3 mm. Large open screen area positioned at end of mill facilitates cleaning. If required, mill can be produced metal-free for ceramic applications.

Titan Industries    South Gate, CA 90280
May 13, 2004 Titanium Blue latex rubber compound provides resilient characteristics that extend life of hose. It is built into any hose specification with customer's required tube thickness and end fittings. Custom end fittings can also be lined with Titanium Blue to achieve abrasion-resistant, built-in rubber flange or Rotalok style fitting. Titanium Blue is suited for mining, rock, sand, gravel, and aggressive material handling applications.

Martin Engineering    Neponset, IL 61345 9766
May 12, 2004 MARTIN® WHIRLWINDâ„¢ High-Frequency Turbine Vibrator uses urethane-encapsulated turbine to output over 10,000 force pounds with noise levels well within OSHA limits. Built-in handle allows one-worker portability for use in railcar unloading or for consolidation of pre-cast concrete or refractory. Unit mounts to cradle lug bracket or railcar wedge, or can be permanently mounted.

Scapa North America    Windsor, CT 06095
May 11, 2004 Dublfilm® S812A is a thin polyester film coated on both sides with high-tack, high-peel acrylic pressure-sensitive adhesive. Adhesive offers resistance to environmental extremes, and polyester film carrier provides dimensional stability. Dublfilm® S812A bonds well to ether and ester foams, as well as low surface energy plastics including untreated polyolefins.