Select-Arc, Inc.    Fort Loramie, OH 45845-0259
Sep 07, 2007 Suited for welding steel mill caster and idler rolls, SelectWear 420-S submerged arc electrode provides resistance to hot wear, fire cracking, and corrosion, while SelectWear 423-S martensitic stainless steel electrode is used to weld steel mill caster and table rolls, and features resistance to thermal fatigue, corrosion, wear, and high hot hardness. Zucaro-O self-shielded electrode is specifically designed to weld sugar cane crusher rolls.

EFD Inc.    East Providence, RI 02914-1342
Sep 07, 2007 Designed for gap filling and application on vertical surfaces, Model SAC305 no-drip solder paste dispensing formulation wicks around metal surfaces such as silver, silver-plated, nickel, brass, and copper to produce solder joints. Featuring lead-free, no-clean formulation, product helps customers solder joint around heat tube (or heat sink) container.

Master Bond, Inc.    Hackensack, NJ 07601
Sep 07, 2007 Suitable for high performance casting, potting, and encapsulation, MasterSil 151 two component compound is designed to cure at room temperature and is resistant to vibration, impact, shock, and thermal cycling. Features include service operating temperature range of -65°F to +400°F, elongation at break of 160%, 460 V/mil dielectric strength, volume resistivity of 1 x 1,015 W cm, and 10:1 mix ratio by weight. Low viscosity assures complete fill-in around complicated contours.

Sheldon Mfg. Inc.    Cornelius, OR 97113 8507
Sep 06, 2007 Accommodating up to 19 one liter flasks in single load, SHEL LAB SI9 shaker has speed ranging from 30-400 rpm with quiet oscillation. Stackable unit includes removable shaking platform and door that opens vertically for use in tight spaces. Available with or without refrigeration, it is suited for applications involving cell aeration, metabolism studies, bacteriology, and cell culturing.

MH&W International Corporation    Mahwah, NJ 07430
Aug 30, 2007 Designed for transferring heat from ICs and other components to their heat sinks, Keratherm 86/82 is thermally conductive, electrically isolating silicone film with reinforcing fiberglass layer for tear and cut-through resistance. It features thermal impedance of 0.05 W/mK, thermal conductivity of 6.5 W/mK, and tensile strength of 20 N/mm². Offered in wide range of standard or custom configurations, material has operating temperature range of -40 to +200°C.

Basell Polyolefins    Wilmington, DE 19808
Aug 30, 2007 Targeting processors of clear, thin-wall, injection-molded (TWIM) food applications, Clyrell EM248U can also be used in in-mold labeling (IML) and off-set printing. Metallocene-based Metocene polypropylene (PP) copolymer is reactor-grade product which does not require vis-breaking or peroxides, and features low organoleptic properties. Clyrell EM248U's high heat deflection temperature also enables it to retain stiffness in hot-fill applications.

Dow Corning Corp.    Midland, MI 48686 0994
Aug 29, 2007 Dow Corning® S Series liquid silicone rubbers are also appropriate for disposable applications in IV sets and catheters as well as for components such as valves and O-rings. Similar to existing LSRs and consistent across Dow Corning® S40, S50, and S70 Liquid Silicone Rubber, chemistry features framework that optimizes it from molecular level. Products reach ultimate physical properties upon initial cure with no drift.

Pliant Corp.    Washington, GA 30673
Aug 27, 2007 Including over wraps, high-impact frozen food films, and bulk liquid packaging films, line of engineered films reduce flavor and aroma transfer to ensure that products are kept fresh during distribution. Performance packaging films can be used for dry and liquid products used in food service industry and wholesale retailer market including: soup, syrups for fountain drinks and juices, marinated products, sauces and toppings applications as well as fresh produce.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Aug 24, 2007 Designed to clean, condition, wash, and compact screenings, SPIRALIFT® SC Screenings Conditioner features freestanding configuration that can fit into tight plant locations. Screenings are received from bar screen in SC hopper, finely ground by heavy-duty TASKMASTER® grinder, and spray washed. Solids drop into second washing zone for intensive washing under high pressure and are transported to screw press where liquids and contaminants are drained and solids are compacted.

Pres-On Products, Inc.    Addison, IL 60101
Aug 22, 2007 Suited for OEM applications, Pres-Bond P10600 combines environmentally stable nitrile base material with sponged synthetic cork that exhibits medium compressibility. Acrylic adhesive provides permanent bond on fiberglass, plastic, and painted surfaces. Available in thicknesses of 1/32, 1/16, and 1/8 in. and lengths of 60-100 ft, tape is suited for marine and RV flooring, as well as padding and cushioning of store fixtures, furniture, and appliances.

Creative Film Corp.    Lakewood, NJ 08701
Aug 22, 2007 Constructed from vegetable resin, PVC-free Green Earth(TM) Film is 100% biodegradable and can be composted. Second surface technique ensures smooth printing on any design or texture, while body coloring technique results in even color. Available in Silver No. 10, holographic film meets all FDA requirements for its primary use, packaging. It comes in standard width of 63 cm and standard thickness of 65-75 microns. Widths up to 86 cm and thicker films are available.

Creative Film Corp.    Lakewood, NJ 08701
Aug 22, 2007 Made from non-burning, self-extinguishing PVC resins, Polychrome(TM) Texturized yields look of brushed metal in high-polish, top surface smooth film. Film is offered in silver, gold, brass, and gun metal with choice of fine stainless brush effect or embossed brush effect. Primarily used as packaging and display film, product is adaptable for use in signage, labeling, and decor. Secondsurface manufacturing process yields customizable, print-ready surface.

Henkel Corp.    Madison Heights, MI 48071
Aug 21, 2007 Designed to streamline die attach process, Hysol® QMI5100 and QMI5200 are formulated to combine properties and functions of die attach film and dicing tape. Curing takes place during standard molding process, eliminating need for dispensing or curing equipment. Formulated as pressure sensitive release materials, products leave no burrs after dicing, promote bondline thickness control, and enable die placement times down to 0.1 sec.

MKS    Andover, MA 01810 2449
Aug 20, 2007 Maintaining ion balance of less than ±1 V or better with external monitor and less than ±3 V without, Ion Systems Critical Environment In-tool Ionizing Blower Model 5822i is suited for ESD control in process tools used in hard disk drive, backend semiconductor, and other automated manufacturing environments. It features internal automatic balance correction system, collimator, separate control box, and Hydro Wave bearing fan facility monitoring system connection.

Intelicoat Technologies    Matthews, NC 28106
Aug 17, 2007 Suited for pop-up banners, MAGIC® POS PRO(TM) + 200 comes in sizes of 36 in. x 20 ft, 36 in. x 100 ft, 44 in. x 100 ft, and 50 in. x 100 ft. MAGIC® POS PRO(TM) + 300, intended for trade show graphics, is available in 36 in. x 20 ft and 36 in. x 100 ft sizes. Designed for indoor applications, both films can be used with aqueous pigment and solvent ink jet printers.

Schreiner ProTech, a business unit of Schreiner Group LP    Blauvelt, NY 10913
Aug 16, 2007 Protective Cover Label Film is designed provide temporary or permanent protection to component openings during production process. Cover labels can be automatically installed through dispensers that adapt to meet individual application requirements and can be peeled off without leaving any residue or damage from external influences. Film also allows printing of cover labels with process control data, warning, and processing instructions.

Extrusion Dies, Inc.    Chippewa Falls, WI 54729
Aug 15, 2007 Featuring spring-loaded external segment, Motorized Dual Deckle minimizes or eliminates manual adjustment. It combines internal deckle, which blocks flow with blades from manifold to die lips, and external deckle, which seals off die gap from outside. AC motor drives external deckle and primary internal deckle as single unit, while smaller motor drives secondary internal deckle that fine-tunes flow at either end of die, minimizing formation of edge bead.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Aug 15, 2007 Incorporating rotor/stator configuration to promote dual flow through Delta rotor/stator, PM Model offers 15-30 minutes typical cycle times. Designed as batch mixer, it is mounted on conventional air/oil hydraulic lift system, and offers rapid incorporation of powders. Several models are available from 5-200 hp. Intended for use in agglomerate reduction and production of fine emulsions, unit suits applications in chemical dispersions, condiments, cosmetics, and adhesives.

Finch Paper    Glens Falls, NY 12801
Aug 15, 2007 Finch Fine® iD paper carries certified labels of Sustainable Forestry Initiative® program and Forest Stewardship Council. Delivering 98 brightness, treated, uncoated paper has no surface flaking and is resistant to blanket memory. Fine iD Bright White sheets, in text weights of 50, 70, and 80 lb, are available in 13 ft x 19 in. sheets and 80 (10 mil), 100 (12 mil), and 100 lb (14 mil) Fine iD Cover Bright White sheets are available in 19 x 13 in. size.

Hobart Brothers Co.    Troy, OH 45373-2900
Aug 14, 2007 Offering creep resistance, TM-81B2 and TM-811B2 are designed for steels containing 1¼% Chrome and ½% Molybdenum, while TM-91B3 and TM-911B3 match chemistry of steels with 2¼% Chrome and 1% Molybdenum. Used only with 100% CO2 shielding gas, TM-81B2 and TM-91B3 come in 1/16 and 3/32 in. diameters, and are suited for flat and horizontal positions. Models TM-811B2 and TM-911B3, used with Argon/CO2 mixture, have all position capabilities and are available in .045, .052, and 1/16 in.