California Micro Devices    Milpitas, CA 95035
Jan 05, 2010 Supplied in 10-pin, 2.5 x 1.0 mm microUDFN package, PicoGuard® CM1227 exceeds IEC61000-4-2 level 4 standards by providing 4 channels of ±15 kV of contact ESD protection in digital consumer and computer applications. It offers low channel input capacitance of 0.35 pF as well as channel input capacitance matching of 0.02 pF (typ). Each I/O pin can withstand 1,000+ ESD strikes, and level of ESD protection suits Transition Minimized Differential Signaling Channels.

ITW Muller    Arlington Heights, IL 60004
Dec 31, 2009 Logo Wrap(TM) offers method for automatically applying 4-sided brand identification to pallet of product as part of stretch wrapping process. Custom-printed with company name/logo, film can be applied to identify stretch wrapped loads and their origins, provide extra advertising, as well as supply contact information or storage and transportation instructions. Dispenser can be integrated into new/existing Muller Octopus(TM) stretch wrapping machines.

Yellow Jacket LLP    Marion, IN 46952
Dec 31, 2009 Designed for use with Yellow Jacket machines, Jacket Wrap(TM) secures palletized loads on forks of forklift. Load retention and holding capabilities are suited for stabilizing odd-shaped loads, and functionality is further enhanced via puncture and tear resistance as well as cling properties.

Premix, Inc.    North Kingsville, OH 44068
Dec 29, 2009 Custom-formulated for applications requiring Class I rated material, Premi-Glas® 2550 CR-SX is suited for use in HVAC and construction products. Product exhibits resistance to corrosion, noise, and vibration while providing structural rigidity. Applications include housings, drain pans, and side walls for hot air furnaces, air handlers, and air conditioning units; and for building products such as residential and commercial doors. Antimicrobial version is also available.

Thermotron Industries, A Venturedyne, Ltd. Co.    Holland, MI 49423
Dec 24, 2009 Model DSX-12000 electrodynamic vibration test system features lightweight 16 in. dia magnesium armature able to produce acceleration levels up to 120 g. Air-cooled system integrates dynamic centering system with optical sensors to ensure that armature remains centered during travel. Compatible with environmental test chambers, product supports payloads up to 1,500 lb and offers velocity up to 115 ips. Shaker is controlled by VCS-3200 Vibration Control System software.

Thermotron Industries, A Venturedyne, Ltd. Co.    Holland, MI 49423
Dec 23, 2009 Intended for high acceleration testing, Model DSX-4000 is rated at 4,000 lbf sine and random, with max velocity of 80 ips, continuous velocity of 70 ips, and 75 g acceleration. Rated at 6,650 lbf for sine and random, Model DSX-6650 provides acceleration levels up to 120 g with 115 ips max velocity and 90 ips continuous velocity. Model DSX-8000, rated at 8,000 lbf sine and random, reaches acceleration levels up to 150 g and 145 ips max velocity.

Thermotron Industries, A Venturedyne, Ltd. Co.    Holland, MI 49423
Dec 23, 2009 Equipped with 16 in. diameter magnesium armature, Model DSX-4000 is air-cooled and fully compatible with environmental test chambers, supporting payloads up to 1,000 lb and velocity up to 80 ips. Unit provides sine, random, shock, resonant search and dwell, real data acquisition and playback, and random-on-random and sine-on-random capabilities. Featuring dynamic centering system, shaker has optical sensors that ensure armature is accurately centered during operation.

Saint-Gobain Performance Plastics    Garden Grove, CA 92841
Dec 22, 2009 CHEMFAB XPS line of coated fabrics utilize specialty formulated resin blend to provide good release properties and chemical resistance, as well as high crease resistance, flex fatigue resistance, and conformability. Applications include release sheets and conveyor belting in textile, chemical, and industrial processing, packaging, and composite molding.

Electronics Assembly, Henkel Corporation    Irvine, CA 92606
Dec 18, 2009 Multicore LF730 enables high-speed printing for extremely fine parts; apertures as small as 160 microns in diameter and stencils as thin as 80 microns have been successfully printed. Particle size distribution delivers more solder per aperture but with less risk of aperture clogging compared to traditional Type 4 pastes. Thermally stable product has shown consistent performance in environments as warm as 30°C at 84% RH. It has 6-month shelf life and exhibits hot slump resistance.

Ticona Engineering Polymers    Florence, KY 41042
Dec 17, 2009 Hostaform MT® 8U05 is UV-detectable acetal copolymer contains additive that allows inspection of components with UV light, which can help improve quality control in production of complex medical devices. Sterilizable, biocompatible grade offers resistance to chemicalsand corrosion and is also resistant to slip and friction. It complies with requirements of U.S. FDA and of European Union relative to food compatibility.

SPX Process Equipment    Delavan, WI 53115
Dec 17, 2009 Intended for general industrial applications, Nettco i-Series is available in multiple mounting configurations including clamp style, open tank, and sealed designs. Mixers can be converted from one mounting arrangement to another in as little as 2 minutes. Global-ready and CE compliant, units feature welded aluminum construction and multiple impeller options. Direct drive and gear options provide full range of shaft speeds.

Hobart Brothers Co.    Troy, OH 45373-2900
Dec 16, 2009 Designed for use on structural steel weldments, XLNT-6(TM) wire offers impact strength of 25 ft-lb at -20°F and resists cracking in applications subject to severe weather. It provides tensile strength of 87,200 psi with yield strength of 66,250 psi. Offered in 3/32 and 5/64 in. dia, wire conforms to AWS A5.20 requirements and can be used for single or multi-pass welding. Wire also features fast-freezing, easy-to-remove slag to prevent slag entrapment.

Advanced Polymer, Inc.    Carlstadt, NJ 07072
Dec 16, 2009 Suited for autocare and surface protection products, APW-319, a low turbidity, cationic microemulsion of pure carnauba wax can be used on variety of substrates including textile, leather, metal, wood, and painted surfaces to impart gloss, slip, and resistance to dirt pick up. Product does not contain ethylene glycol or alkylphenol ethoxylates, and produces thin, uniform film of wax when used in spray detail waxes or automotive wash/wax systems.

JM Science, Inc.    Grand Island, NY 14072-0250
Dec 15, 2009 Available with amperometric end point detection method, AQUACOUNTER® Karl Fischer volumetric titrator model AQV-2200S allows 2 titration stations to run parallel with various coulometric/volumetric combinations, and offers plug-and-play 2-channel option, allowing end-users to add various peripherals. It can store results in USB memory stick or user may review results using PC LAN software. Unit comes equipped with built-in thermal printer that provides high resolution printouts.

JM Science, Inc.    Grand Island, NY 14072-0250
Dec 14, 2009 Equipped with ultra-trace moisture measurement mode with accuracy of 10 µg H20, AQ-2200 Series AQUACOUNTER® Karl Fischer Coulometric Titrator allows 2 titration stations to run parallel with various coulometric/volumetric combinations. Several electrolytic cells are available including small volume and 1-compartment versions. It features 7.5 in. color touch screen, stores results in USB memory stick, and allows user to review results using PC LAN software.

ITW Ransburg    Toledo, OH 43697
Dec 11, 2009 As portable solutions for any finishing operation, Vector Solo 85 kV waterborne or solvent, Vector Solo 65 kV, and Vector Solo Air-Assisted Airless are cordless spray guns that increase user comfort and reduce fatigue. Ergonomic handle contouring provides operators with proper and comfortable grip, while minimized handle vibrations promotes control during operation. Also available, Vector Solo AA combines air-assisted airless technology with atomization and offers pattern adjustability.

Chem Polymer Corp.    Fort Myers, FL 33911
Dec 11, 2009 Chemlon 217 GI is 17% glass fiber-reinforced nylon 6 compound with levels of stiffness, flexural strength, and tensile strength suitable for injection molded applications that undergo challenging dynamic forces. Impact-modified and UV-stabilized, it suitable for outdoor and low-temperature environments. Compound can be used in applications such as office chairs, outdoor power equipment, outboard motor covers, and gun stock components.

Pregis Corp.    Deerfield, IL 60015
Dec 09, 2009 Available in 48 in. width and 3 in. thickness, PolyPlank® EXT single cross section, polyethylene foam plank is produced via extrusion process, which creates homogeneous foam product with dimensional stability. Closed-cell structure makes it buoyant, virtually impermeable to water, and resistant to water vapor transmission. Available in 1.7 or 2.2 lb densities, product can be die cut, heat-sealed, welded, glued, saw cut, split, skived, water jet cut, routed, and drilled to specifications.

Cleveland Vibrator Co., The    Cleveland, OH 44113
Dec 07, 2009 Featuring 2.25 in. base, Turbomite CVT-P-22 Acetal Body Mini Turbine Vibrator is constructed with acetal plastic and SS exterior parts with laser etching. Operating from 10-100 psi, it generates 18,000 vibrations/min at 80 psi with force output of 55.2 lbf and air consumption of 20 cfm. Unit is controlled with simple hand valve or 2-way solenoid valve and regulator. Also included are SS mounting bolts, muffler, and nickel-plated brass push-on inlet fitting.

Creative Materials Inc.    Ayer, MA 01432
Dec 07, 2009 Formulated to be screen printed, 125-19 High Temperature Ink can be used with Kapton®, Teflon®, and rubber surfaces as well as ceramic, glass, and silicone substrates. Environmentally friendly product can also be syringe-dispensed, dipped, and sprayed. Providing electrical insulation and resistance to water, ink is produced as smooth paste suited for EMI/RFID shielding, polymer thick film circuitry, and electrical attachments for stress-sensitive devices.