Sealed Air Corp., Packaging Products Div.
Saddle Brook, NJ 07663
Jul 23, 2008 Suited for small parcel shipping, Yesterday's News(TM) padded mailer features inner protective batting of recycled newspaper as well as natural outer and inner kraft material made from 100% recycled content. Nature of outer material eliminates need for dye to create gold color, and protective mailing product can be recycled with mixed paper such as magazines, directories, and junk mail.

WSF Industries Inc.
Buffalo, NY 14217
Jul 18, 2008 Built for manufacture and service of electric motors, Vacuum Pressure Impregnation (VPI) tank provides 100 psig internal pressure and full vacuum at 100°F maximum temperature. Featuring Rapidoor® fast-actuating closure, tank is installed in compact full-pit layout, and its atmospheric storage tank is set below floor level to facilitate product loading and unloading. NEMA 12 control panel, vacuum and hydraulic systems, and chiller are located at floor grade to facilitate operator access.

Tiffen Co. LLC, The
Hauppauge, NY 11788
Jul 17, 2008 Made of water-resistant, heavyweight cotton canvas with foam padding on all 4 sides, F-300 Long Lens Bag enables camera to be stored vertically. Bag features 45° angle zippered main compartment and expandable front pocket with fitted weather flap as well as rear pocket for accessories. Adjustable 2 in. Gripper Shoulder Strap consists of twin tracks of high-friction rubber that are woven into cotton webbing so that it clings to shoulder and runs completely around bag for extra support.

Elma Electronic Inc.
Fremont, CA 94538
Jul 17, 2008 Available in various sizes and configurations including 19 in. rack mount enclosures in 3, 5, 7, and 10U heights and 22 and 25 in., 12R1 modular COTS system platforms have complete EMC shielding integrity with braided gasketing, honeycomb filtering, and blind-riveting. Rugged chassis shell is made of aluminum frames and extruded profiles, and hinged front door panel ensures unobstructed access to boards and drives. Units can withstand up to 15 G of shock and vibration.

Dynalab Corp.
Rochester, NY 14623
Jul 16, 2008 Offered in 50 and 100 mL versions, Kartell Dropping Bottles are constructed of LDPE and feature elongated spouts for increased reach into tight areas. Products are suited for use with water and oils since there are no shoulders to restrict fluid flow. Graduated bottles, which can be used as rough measures, incorporate molded-in area for tag to facilitate identification of contents. Long-spout dropping bottles conform to DlN 13316 and 168.

Bud Industries, Inc.
Willoughby, OH 44094
Jul 16, 2008 Designed from ADC-12 die-cast aluminum alloy, ANS Series die-cast boxes have 0.098 in. thick wall construction that ensures rigidity in heavy-duty applications. They feature 1-piece molded outer Silicone gasket and a second gasket which is made of wire-mesh with sponge rubber. Units include recessed area on cover surface for decals, and can be mounted without need of removing covers and subsequently exposing internal components via optional mounting brackets.

MOCON
Minneapolis, MN 55428 1010
Jul 15, 2008 Offered as gas collection method for human, biological, and industrial waste environments, Sumo-Bag(TM) is designed to transport malodorous, higher polar, semi-volatile compounds such as p-Cresol. Construction consists of metalized Teflon® fluorinated ethylene propylene (FEP) film and valve with septum. Typically air-sampling pump is used to pump air through Teflon tubing, which has needle attached to one end so it can be inserted through valve's septum top.

Spiroflow Systems, Inc.
Monroe, NC 28110
Jul 15, 2008 Constructed of flexible polyester fabric supported on steel frame, Spirostore silos store up to 7,000 ft³ of dry bulk material and support weights up to 90,000 lb. Shape, size, and type of polyester fabric can be adapted to meet specific requirements. Designed to meet spatial availability, product specifications, and manner of discharge, products are space-optimized due to square or rectangular dimensions and do not require complex foundations for support.

Lista International Corp.
Holliston, MA 01746
Jul 14, 2008 Intended for modular storage drawer cabinets and Storage Wall® systems, suspension system incorporates guide track that wraps under drawer body for stability and strength. System utilizes quiet Polyoxymethylene bearings, combining fatigue resistance and low friction. Available in 2 full-extension weight capacities of 440 and 165 lb, drawers extend 100% from cabinet housing, allowing ergonomic access to all contents.

Pelican Products, Inc.
Torrance, CA 90505
Jul 14, 2008 Designed to fit in most soft bags, watertight and crush-resistant 1090 HardBack(TM) protects all brands of up to 15 in. laptops from conditions experienced during travel. Composite shell is resistant to impact, heat, and chemicals, while plush foam liner protects against shock, and anodized aluminum latch ensures computer stays secure. Case also features tongue-and-groove lid construction, polymer o-ring, and automatic pressure equalization valve.

Medicus Health
Grand Rapids, MI 49508
Jul 10, 2008 Wire Shelving Kits with Preconfigured Storage Bins are designed to help healthcare facilities increase organization, reduce wasted storage space, and consolidate purchase orders. Kits are suited for organizing supplies in operating room, at nurse stations, or in supply storage rooms. Each heavy duty shelf has 800 lb weight capacity, and snap on caster sets are also available to make storage solution mobile.

Steel King Industries, Inc.
Stevens Point, WI 54481
Jul 09, 2008 Able to hold bundle loads up to 6,000 lb, and loads up to 20,000 lb on one side of column, I-Beam Cantilever Rack has no front column, making any load or storage slot immediately accessible. Featuring freestanding heights up to 20 ft and arm lengths up to 8 ft, it stores long, heavy, odd-shaped items without need to palletize. Columns, arms, and base are made of I-Beam structural steel with 50,000 psi minimum yield, and arms are secured to columns with grade 5 bolted connections.

C & H Distributors, Inc.
Milwaukee, WI 53214
Jul 09, 2008 Available in 72 and 84 in. heights, E-Z-RECT® Trim-Line Boltless Shelving features 5/8 in. particleboard shelves that attach to posts via boltless locking tab connection. Each 400 lb capacity shelf adjusts up and down on 1 in. centers to accommodate different sized items, and total capacity is 7,000 lb. Starters are complete stand-alone units with 4 shelves, 4 posts, and 8 beams, while add-ons include 4 shelves, 2 posts, and 8 beams and can attach to starters or other add-ons.

Eaton Corp.
Cleveland, OH 44114
Jul 09, 2008 Integrating electrical isolation, voltage transformation, power distribution, and maintenance bypass, Powerware® BladeUPS(TM) Maintenance Bypass Cabinet allows transfer of power to full system bypass to perform service, testing, and maintenance on Powerware BladeUPS without interrupting power to critical load. This 3-in-1 cabinet complements rack-based, 60 kVA Powerware BladeUPS parallel system, optimized for high-powered blade servers and high-density computing environments.

VEE GEE Scientific, Inc.
Kirkland, WA 98034
Jul 08, 2008 Suited for incubating diluted samples of clean water, wastewater, effluent water, and polluted water during 5-day biochemical oxygen demand (BOD) test, VEE GEE BOD bottles are available in packs of 6 and cases of 24. Meeting ASTM E-438 Type 1, Class A borosilicate glass specifications, bottles feature flared mouth to form water seal to prevent ingress of air during incubation, interchangeable pennyhead stoppers with tapered bottom, and permanent marking squares for flexible numbering.

Automated Packaging Systems Inc.
Streetsboro, OH 44241
Jul 08, 2008 Derived from ethylene vinyl acetate co-polymer resins, Low Melt Batch Inclusion (LMLT) film allows LMLT bags to melt and disperse into product being mixed and become minor component of finished compound. Film is suited for customers using batch inclusion bags for plastics products, soft rubber products, and adhesive manufacturing applications. It also suits applications with short mixing cycles, low shear rates, and for low temperature mixing.

Dynalab Corp.
Rochester, NY 14623
Jul 03, 2008 Supplied with airtight, push-on lids, Kartell Weighing Bottles are autoclavable and reusable translucent products that help reduce tare weight correction requirements. Tops can be squeezed to assist pouring, and there are no internal shoulders. Resistant to acid attack, bottles (codes 6115-0001 through -0007) come in sizes ranging from 20-360 ml with ODs from 30-70 m and heights from 29-118 mm. Tare weights range from 8-40 g.

Guyson Corporation of U.S.A.
Saratoga Springs, NY 12866
Jul 01, 2008 With interior dimensions of 60 x 60 x 60 in., Model 10/P holds 1.5 cu-ft of shot or grit and accommodates large components or bulky fabrications. Cabinet has 2 sets of armholes and is supplied with turntable to facilitate access during blasting operations. Turntables up to 48 in. in diameter are available with weight capacity from 500-2,000 lb. Cyclone reclaimer is installed on top of media delivery stack-up to separate dust and fines from recirculated blast media.

VEE GEE Scientific, Inc.
Kirkland, WA 98034
Jun 26, 2008 Available in packs of 6 and cases of 24, BOD bottles are manufactured from borosilicate tubing and suited for incubating diluted samples of clean water, wastewater, effluent water, and polluted water during 5-day biochemical oxygen demand (BOD) test. Flared mouth forms water seal to prevent ingress of air during incubation, and interchangeable glass pennyhead stoppers have tapered bottom that also prevents air entrapment.

National Adhesives
Bridgewater, NJ 08807
Jun 26, 2008 FIBRECYCLE K.E.G.(TM) (Keep Earth Green) Packaging Solution is 100% recyclable drum for PUR-FECT-LOK(TM) line of panel laminating adhesives. Maximizing storage space, lightweight fiber drum also insulates heated adhesive and does not conduct heat to surfaces, reducing risk of contact burns.