Dorner Mfg. Corp.    Hartland, WI 53029 0020
Sep 09, 2003 Suited for order fulfillment and returns processing of books, Media Max 350 is capable of processing rectangular items such as books, CDs and DVDs, boxed software, and videos. Users can run order fulfillment waves for any mix of items with virtually no change-over time. Computer-controlled machine has Autologik designed software and can read from 1–5 exposed sides simultaneously. Unit also performs labeling at rates to 250/min.

ControlAir Inc.    Amherst, NH 03031 2315
Sep 09, 2003 Type-300 is constructed of materials that meet NACE specification No. MR-01-75 for corrosive resistance. Soft, rubberized valve provides positive shutoff and compensates for dirt and other foreign matter, while tapped exhaust allows remote venting media. Filter Regulator is available in ¼ in. NPT porting with output ranges of 0–30, 0–60, and 0–100 psig. Max supply pressure is 250 psig. Flow capacity is 20 scfm at 100 psig supply with 20 psig output.

Fons Corporation    Northboro, MA 01532
Sep 09, 2003 NEMA-12 rated TICE-series wall-mount cabinets accommodate up to 144 fibers and employ dual hinged design that separates owner/client network segments. MDC-series wall- or rack-mount cabinets accommodate up to 216 fibers and offer design that may be configured for single or dual access applications. NEMA-4 rated Outside Plant enclosures accommodate up to 216 fibers within single- or dual-access cabinet and are offered in wall, pole, or pedestal mount options.

Haewa Corp.    Duluth, GA 30097
Sep 08, 2003 Measuring 14 in. high and 3.5 in. deep, Universal Keyboard Tray permits flush mounting into any 19 in. electronic rack's EIA rails or into any cabinet door or side. Made of 16 GA sheet steel, tray includes full size mouse shelf with mouse pad, twist lock with key, foamed-in-place gasketing for NEMA 12/IP 55 protection, and mounting hardware. Tray is finished with scuff-resistant epoxy-polyester powder coat.

Norgren    Littleton, CO 80120
Sep 08, 2003 Based on Lintra® LITE technology, pneumatic rodless cylinder offers integral switch mounting and fully machined, anodized end covers with mounting holes. Sealing system prevents loss of air and guards against ingress of dust. Available with adjustable cushioning, double-acting rodless cylinder can be specified with 25, 32, or 40 mm dia with max bore stroke of 5,000 mm. Product suits electronics, packaging, and printing industries.

Mack Corp.    Flagstaff, AZ 86004
Sep 08, 2003 Delivering pick and place service, grippers feature blank fingers that are profiled to fit small parts. Finger sets can be exchanged without disturbing mounting setup, close with spring force, and open with plant air using valves on 3-way control circuits. Products are offered in 5 micro sizes, in 3 basic configurations, and in 4 mounting styles with choice of aluminum alloy or stainless steel materials.

Bel-Art Products    Wayne, NJ 07470
Sep 08, 2003 Scienceware® 50 ml conical tube holders allow for sample transport and pipetting while leaving both hands free. Grip style securely holds tube in base and moves with tube when it is lifted from benchtop. Tubes can be removed by holding base and pulling tube out. Non-Grip style snugly holds tube in place yet allows tube to be lifted freely from holder. Grip style is color coded blue and Non-Grip is white for easy identification.

Hirschmann Engineering USA, Inc.    Schaumburg, IL 60173
Sep 08, 2003 Modular System 9000 allows for quick and accurate changing of pallets, workpieces, fixtures, and vices. It offers positioning and repeatability to within .00039 in. Clamper Models 9001 and 9003 are normally in closed position and are opened via air or hydraulic pressure. Axial loads of 2,200 lb are standard, with up to 6,750 lb of clamping force. System 9000 is suited for HMCs, VMCs, grinding machines, CMMs, and vertical EDM's.

Brawn Mixer Inc.    Holland, MI 49424
Sep 05, 2003 Mixers deliver optimal flow pattern and velocity in applications where stratification, solidification, and heat transfer are a concern. Belt-driven and gear-driven designs can be equipped with stuffing boxes or mechanical seals. For ease of maintenance, mixers feature optional shutoff device that permits work on seals without emptying tank contents. Products are suited for pulp and paper, petroleum, chemical, food processing, and large tank processes.

Simonds Industries, Inc.    Fitchburg, MA 01420
Sep 05, 2003 STRONG-MAGâ„¢ Magnetic Products eliminate manual clamping and perform tasks such as jigging, positioning, work holding, lifting, moving, and gripping. Permanent magnets are available in button, cylindrical, flat, round, rectangular, and horseshoe shapes in various sizes. Materials range from ceramic and alnico to neodymium iron boron and samarium cobalt. Tools include permanent magnet chucks, lifters, retrievers, grips, brushes, brooms, and sweeps.

Premier Pneumatics, Inc., A Member of the K-Tron Process Group    Salina, KS 67402
Sep 05, 2003 With high-capacity sequencing system, 4 in. Series³ 2424 Powder and Pellet Vacuum Receiver handles powder, pellet, regrind, and granular materials. Unit offers carbon steel construction with optional stainless steel material contact areas. Its 22 in. dia housing has 4 in. inlet, single cartridge with 50 ft² of washable polyester filter medium, and 10 in. gravity discharge gate. Hopper capacity is 5 ft³.

ErgotecH, Inc.    Danbury, CT 06810
Sep 05, 2003 Multi-directional ERGO-ROLL is structured around 4 free-turning, football-shaped roller elements, positioned in 90° staggered pattern around perimeter of main wheel hub. Arrangement provides 9 individual rotating turning axles when paired in duplex-wheel configuration. Made of self-lubricating plastic composite, roller works in wet applications. ERGO-ROLL is 1.90 in. dia and comes in 7/16 in. hex, 1/2 in. round, 5/16 in. hex, and 5/16 in. round axle configurations.

PSI Peripheral Solutions Inc.    Mississauga, ON L5N6C6  Canada
Sep 05, 2003 Large Capacity In-Feeder 3000 intelligently dispenses large volumes of materials including catalogs of different sizes, brochures, paper, small cards, and CDs. Capacity is 48 in. for catalogs or up to 4,000 sheets of paper. Based on average feed time of 4 sec/catalog, user can stack up to 384 catalogs that are 1/8 in. thick in one load for disbursement, which would provide running time of over 25 min.

Alemite Corporation    Charlotte, NC 28226 3515
Sep 05, 2003 Model 575, for high-pressure, high-flow applications, incorporates rechargeable 12 V NiCd battery and motor in handle to provide optimal balance for ease of use. NiCd battery offers twice the life of batteries in existing cordless grease guns. Gun has flow rate of 5.25 oz/min @ 1,000 psi and max delivery pressure of 6,500 psi. Loading options include 14 oz cartridge, 16 oz bulk, and suction loading capability. Model 575-A comes with one battery and Model 575-B includes 2 batteries.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Sep 04, 2003 Open printer stand handles footprint, weight, and vibration of Model 4247-V03 printer, supports dual continuous forms front tractor paper paths, and has 3 stacking heights for paper output tray. It contains separator guide for separation of each continuous form. Model 4247-003 Industrial Impact Matrix Printer offers print speeds of up to 1,100 cps in fast draft mode and includes configuration flexibility to enable all interface cards to be user installable and switchable.

Spiroflow Systems, Inc.    Monroe, NC 28110
Sep 03, 2003 Powder Handling System consists of Type 3 bulk bag discharger, fitted with Hogan bin discharger and aero-mechanical conveyor. By using pneumatic massage paddles and bag tensioning device, Type 3 improves material flow out of bulk bag with no dramatic degradation. Aero-mechanical conveyor creates moving current of air in which powder flows, and Hogan bin discharger acts as flow promoter by using suspended series of blades controlled by vibrator.

Outwater Plastics Industries, Inc.    Wood-Ridge, NJ 07075
Sep 03, 2003 Ready-to-assemble drawers and drawer components are available in solid Beech, Birch plywood, and PVC wrapped particle board. All drawers come with ¼ in., color-matched, melamine drawer bottom. Able to be assembled without any woodworking skills, drawers are manufactured utilizing Chuck and Bore joinery with 12-step and 7-level polyester acrylic finish. Options include dovetail joinery and bottom prepared for concealed runners.

Aisle-Master    Memphis, TN 38122-0666
Sep 03, 2003 Aisle-Masterâ„¢ articulated, narrow aisle lift truck operates in aisles as narrow as 78 in. wide; negotiates rough, unpaved ground with 16 in. front wheels and 18 in. rear wheels; and handles grades or ramps to 15%. With 4,400 lb capacity and 24 in. load center distance, product is powered by LPG fueled, 67 hp engine with hydrostatic drive system. Triple and Quad masts with lift height options up to 30 ft are available, and side shift is fitted as standard.

Scott Specialty Gases    Plumsteadville, PA 18949 0310
Sep 03, 2003 Leak-free Model 57 controls gas pressure, purity, filtration, and distribution at single location when gas source is located in remote location. Unit can be wall or bench-mounted, or suspended from ceiling. Individual panels snap into prefabricated, expandable metal frame and are connected to primary gas supply with stainless steel tubing. Any combination of pressure regulators, purifiers, moisture traps, and outlet valves can be configured to meet laboratory requirements.

Swanson Systems Inc.    Erie, PA 16512
Sep 03, 2003 Agilewalk walking beam chassis incorporates lift and transfer motions along front, front and back, or on front and back and one or both ends. AgileCells in precision increments are individually serialized, inspection documented, and warranted dimensionally interchangeable in 36 in. increments. Expandable in lengths from 3–60 ft, reusable machine provides vibration-free stability in synchronous inline assembly machine applications.