National-Spencer, Inc.    Wichita, KS 67201 0057
Mar 21, 2003 Portable Zee Line Model 5265 features 17 gal, wheel-mounted tank and loading funnel with antisplash rim for clean fills. Equipped with 3:1 ratio pump, system dispenses 3.7 gpm and includes 13 ft long delivery hose and digital meter for dispensing in quarts. Product dispenses oil in workshops, farms, industrial plants, automobile service, and fleet maintenance environments.

Rockwell Automation    Milwaukee, WI 53204
Mar 21, 2003 HPG High Precision Gantries produce accelerations of 50m/s², move at speeds up to 3 m/s, and provide bi-directional repeatability to ±2 µm. LC80 iron-core brushless linear motors require only single-sided magnet track to form linear motor assembly. Gantries come standard with single encoder per axis configuration. Travels range from 250-750 mm per axis. High-resolution optical encoders offer resolutions from 0.1-5 µm per count.

Silgan Containers Corp.    Woodland Hills, CA 91367
Mar 21, 2003 Custom Polystar system produces all-plastic microwavable containers with soft plastic, peel-open lids using Polywelding(TM) spinwelding process. Lids, with no sharp edges, incorporate active oxygen absorber, which provides shelf life for container contents equal to containers with metal ends. Cernotec's Delta Tau motion control system enables process to use combination of pressure and spinning to fuse plastic Polystar lid to Omni container at rates of 600 units/min.

Dorner Mfg. Corp.    Hartland, WI 53029 0020
Mar 21, 2003 Series 3200 Conveyors offer 1,000 lb load capacity, belt speeds of up to 421 fpm, and lengths from 4–99 ft in any 1/8 in. increments. Flat belt, cleated belt, and center drive models are available. V-guide belt option provides enhanced tracking.

Spirax Sarco, Inc.    Blythewood, SC 29016
Mar 21, 2003 STVM Silent Type Vortex Mixing Hosedown Station provides instantaneous, temperature-controlled hot water by blending steam and cold water. Thermal element automatically shuts off steam flow if hot water temperature exceeds temperature set point by 15°F. Vortex scouring action helps prevent scaling. Water pressures range from 20–110 psig and steam pressures range from 40–150 psig. Model V150 produces water from ambient to 150°F and Model V180 produces water to 185°F.

Naeco, Inc.    Absecon, NJ 08201
Mar 20, 2003 Electric, 3-wheel, counterbalance Series EFG-DF has steeringwheel-mounted LCD Information and Service Display (LISA) device that allows driver to choose from 5 individually programmed operating modes. Curve Speed Reduction System prevents possibility of tipping. Steering assembly incorporates jointed, cross-shaft axle, integral steering cylinder, and twin rear wheels. Truck handles loads from 2,500–4,000 lb, reaches travel speed of 10 mph, and offers lift speed of 91 ft/min.

Air Technical Industries    Mentor, OH 44060
Mar 20, 2003 Constructed of welded structural steel, compact lift table lowers down to 3 ½ in. and employs gearbox-driven screw that lifts up to 250 lb load. Sizes are available with widths of 12, 14, 15, 18, and 24 in. and lengths of 18, 19, 20, 24, 28, and 36 in. Vertical lift ranges from 10-48 in. Pushbutton remote control and adjustable limit switches are available. Stainless steel and aluminum construction are available for applications with lower weight requirements.

Meese Orbitron Dunne Co. (MOD)    Saddle Brook, NJ 07662
Mar 20, 2003 Ship Shape(TM) containers, offered in 16 standard colors and various custom colors, provide color-coded system for identification of containers and contents. Rotationally molded in one piece, seamless containers are colored throughout to retain color-coding even if scratched or scuffed. Able to safely accommodate up to 1,500 lbs, containers nest five- to seven-high when empty and can nest or stack higher in storage. Models are offered with 2- or 4-way fork entry.

Penco Products, Inc.    Oaks, PA 19456 0378
Mar 20, 2003 Clipper® Shelving utilizes Hi-Performance® shelves to maximize load handling capacity. Open-type shelving is suitable for general-purpose use. Closed-type shelving units are covered on 3 sides with steel panels to provide stability, protection, and cleanliness for stored items. Clipper shelving can be ordered with full height, partial, and sliding dividers, as well as bin fronts and label holders. Sliding and swinging doors and modular drawers are available.

DJ Products, Inc.    Little Falls, MN 56345
Mar 20, 2003 PartsCaddy Work Positioner 1000 (PWP 1000) eliminates strains, pains, and injuries to employees arising from lifting objects or working on projects not properly positioned for optimum working height. Capable of horizontal/vertical positioning, PWP2000 maneuvers and handles loads up to 1000 lb and offers variable speed twist grips that allow operator to travel forwards and backwards at speeds of 0-3 mph. Heavy-duty, 24 V motor is powered by two 12 V batteries.

Genie, a Terex Company    Redmond, WA 98052
Mar 20, 2003 Superlift Contractor(TM) includes fixed steel base and safely lifts up to 650 lb with 6 different load handing attachments available. Loads are lifted by aircraft-quality cable controlled by heavy-duty winch. One-speed or optional 2-speed winch incorporates silent ratchet system. Non-marking Performa(TM) casters prevent marking floors or picking up debris that could otherwise damage floor. Four in. front casters and 5 in. rear casters with side brakes are standard.

Dualdraw    Commerce City, CO 80022
Mar 19, 2003 Model PT2032, suited for polishing applications, includes table top that draws fumes, dust, and smoke away from operator. With footprint of 32 x 33 x 35 in., unit has 32 x 20 in. downdraft table that affords knee room for operator. Unit also includes casters and 1,200 nominal cfm filter system, which contains 24 x 24 x 4 in. pre-filter and 24 x 24 x 4 in. final filter that are 95% efficient to 0.5 microns with 115 V motor.

Arbor International, Inc.    Ann Arbor, MI 48103
Mar 19, 2003 Felco Low Lift Precision Hydraulic Jacks are small, lightweight and portable. They fit under heavy machinery and equipment in tight areas that are hard to reach. Lifting height can be adjusted within few thousandths of an inch. Jacks come in 10, 20, and 30 ton capacities. Ten ton model weighs only 8 lb. Each includes height adjusting spacers in wooden box.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Mar 19, 2003 Nozzle is used on threadlocking, thread sealing, and retaining compounds packaged in 50 ml and 250 ml red bottles. Translucent application tip offers visual indication of product when dispensed. Pull/open, push/close nozzle features built-in reservoir, which prevents product from dripping down bottle. With orifice of 0.7 mm, nozzle eliminates need for snipping tip; however it can be trimmed to 3.0 mm to accommodate higher viscosity products.

J. W. Winco, Inc.    New Berlin, WI 53151
Mar 18, 2003 Used as detent, positioner, or for clamping with spring pressure, positioning elements' noses can be used for push-on or push-off operation. At pulling end, female thread accepts pulling rods or operating knobs. Products offer steel, zinc-plated threaded body and plunger pins and pin casings of hardened and blackened steel. Positioning elements are available with tapped holes, pointed nose, semi-spherical nose, or prism nose.

Beckman Coulter, Inc.    Fullerton, CA 92834-3100
Mar 17, 2003 Nanomekâ„¢ Liquid Transfer Module pipettes volumes from 50 nanoliters to 20 microliters and is integrated directly on Biomek® FX workstation, for automated nanoliter dispensing in 96-, 384- and 1536-well plate formats. It incorporates Allegro Technologies' spot-onâ„¢ liquid handling technology, providing dispensation control, precision, and accuracy. Module enables miniaturization of assays in genomics, proteomics, and high-throughput screening applications.

ID Technology Corp.    Fort Worth, TX 76106
Mar 17, 2003 Model 250 prints and applies variable information labels using thermal transfer process. Semi-automatic system uses jig fixture to hold product in place during labeling process. Product and label sensors can be used to specify where label is to be applied with accuracy up to 1/8 in. Applicator is available with Sato, Zebra, or Datamax thermal transfer print engines and can print up to 12 ips with up to 300 dpi print resolution.

Fisnar Inc.    Wayne, NJ 07470
Mar 17, 2003 Variable-ratio gear-pump machines offer precision gear pumps and electronic interlock to ensure selected ratio is fixed and password protected. Metered shot and flow range is from 0.75 ml per shot to 250 liters/min, depending on selected system. Ratio ranges vary from 1:1 to 50:1, and viscosities of 150-100,000 cps can be accommodated. Systems are suited for RIM and doming applications that require constant flow.

LMT-Fette    Cleveland, OH 44135
Mar 17, 2003 Wash-In-Place (WIP) tableting systems include alpha-beta valve, tablet press, deduster, metal check, automatic tablet check, and tablet bin, all contained with isolators in one system in one process room. i-Series machines, capable of producing 1.5+ million tablets per hour, offer multiple tooling options from 32–113 stations and from 6–59mm tablets. Units also offer single-, double, and triple-layer production capability and bi-layer production with core insert.

Columbia Machine Inc.    Vancouver, WA 98661
Mar 14, 2003 Available for floor-level and high-level palletizers, conveyors and controls enable users to stack loads with alternating product layers or different products within each layer. Technique gives smaller retailers more cost-effective inventory options, such as purchasing less-than-pallet-load quantities, and simplified re-stocking.